Product Introduction
The Aqara Temperature and Humidity Sensor T1 is an advanced sensor designed to monitor ambient temperature, humidity, and atmospheric pressure. Utilizing the Zigbee 3.0 wireless communication protocol, it accurately detects subtle environmental changes. This sensor can seamlessly link with an Aqara hub and other smart devices to create automated scenes based on detected environmental conditions. An Aqara hub is required for full functionality, and specific hub models may be needed for certain features. For more details, please visit www.aqara.com/support.
Device Binding & Initialization
To begin using your Aqara Temperature and Humidity Sensor T1, ensure you have the Aqara Home app downloaded and an Aqara hub installed. Open the app, navigate to 'Home', and tap the '+' icon in the top right corner to access the 'Add Device (Accessory)' page. Select 'Temperature and Humidity Sensor T1' and follow the on-screen instructions for setup. For comprehensive guidance, refer to the detailed electronic manual available at www.aqara.com/support or by scanning the provided QR code.
Note: If the connection fails, try moving the accessory closer to the Hub.
Product Specifications
Model: TH-S02D
Battery: CR2032
Wireless Protocols: Zigbee
Dimensions: Ø36 × 36 × 9 mm (1.42 × 1.42 × 0.35 in.)
Zigbee Operation Frequency: 2405-2480 MHz
Zigbee Maximum Output Power: ≤ 13 dBm
Operating Temperature: -20°C ~ 50°C (-4°F ~ 122°F)
Operating Humidity: 0 ~ 100% RH, no condensation
Package Contents: Temperature and Humidity Sensor T1 × 1, User Manual × 1
Manufacturer Information
Manufacturer: Lumi United Technology Co., Ltd.
Address: Room 801-804, Building 1, Chongwen Park, Nanshan iPark, No. 3370, Liuxian Avenue, Fuguang Community, Taoyuan Residential District, Nanshan District, Shenzhen, China
Online Customer Service: www.aqara.com/support
Email: support@aqara.com
Warnings and Cautions
This product is not a toy and should be kept away from children. It is designed for indoor use only and should not be exposed to humid environments or outdoors. Avoid contact with water or other liquids. Do not place near heat sources or in unventilated enclosures. Unauthorized repairs are not permitted; all servicing must be performed by authorized professionals. This product is intended to enhance home living convenience and should not be relied upon as security equipment. Misuse may result in the manufacturer disclaiming liability for risks and losses.
Caution: Battery replacement with an incorrect type may pose an explosion risk. Dispose of used batteries properly according to instructions. Do not ingest batteries, as this can cause severe chemical burns. Keep batteries away from children. Ensure the battery compartment is securely closed before use.
Declarations of Conformity
EU Declaration of Conformity: Lumi United Technology Co., Ltd. declares that the Temperature and Humidity Sensor T1, TH-S02D, complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at https://www.aqara.com/DoC/.
UK Declaration of Conformity: Lumi United Technology Co., Ltd. declares that the Temperature and Humidity Sensor T1, TH-S02D, complies with Directive 2017 (SI 2017 No. 1206, as amended by SI 2019 No. 696). The full text of the UK declaration of conformity is available at http://www.aqara.com/DoC/.
WEEE Disposal and Recycling Information
Products marked with the WEEE symbol are waste electrical and electronic equipment and should not be disposed of with unsorted household waste. Protect human health and the environment by returning your waste equipment to a designated collection point for recycling. Contact local authorities for information on collection points and their terms.
FCC Compliance Statement
FCC ID: 2AKIT-AS013. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in a residential installation. RF Exposure statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Maintain a minimum separation distance of 20 cm between the radiator and your body.
IC Notice to Canadian Users
IC: 22635-AS013. This device complies with Industry Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES - 003 and RSS - 247. RF Exposure statement: This equipment complies with IC radiation exposure limits for an uncontrolled environment. Maintain a minimum separation distance of 20 cm between the radiator and your body.
Declaration of Conformity - Aqara
