User Manual for SUPER BRIGHT LEDS models including: VTS2D-SW Series Vapor Tight Linear LED Light, VTS2D-SW Series, VTS2D-SW, Vapor Tight Linear LED Light, Tight Linear LED Light, Vapor LED Light, LED Light, Light


File Info : application/pdf, 2 Pages, 700.29KB

PDF preview unavailable. Download the PDF instead.

VTS2D-SW User Manual
User Manual

Important: Read all instructions prior to installation.
Vapor Tight Linear LED Light
Safety and Notes
· Product should be installed and serviced by a certified electrician in accordance with applicable national, state, and local building and electrical codes.
· To reduce the risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures.
· Avoid looking directly into lamp when illuminated. · Ensure all mounts are securely attached and will support the weight of
the fixture. Failure to properly support fixture may result in damage or injury, for which the manufacturer does not assume responsibility.

VTS2WDIF-SI-WCOSNeries

Specifications

VTS2D-SW

IP Rating

IP65

Operating Temperature

-22°­113° F (-30°­45° C)

Wiring Diagram

Line Neutral Ground

120­277 VAC input

L

L

N

N

GND GND

Black White Green

Check product label for specific electrical specifications related to installation. Improper installation will void warranty.

Dim (+) Dim (-)

0­10 V dimming

+

+

-

-

Purple Gray/Pink

CCT Selection
To select CCT, open the linear light by releasing the metal clips. This can be done prior to or during installation.

3000K 4000K 5000K

4400 Earth City Expy, St. Louis, MO 63045

866-590-3533

superbrightleds.com

User Manual

Important: Read all instructions prior to installation.
Vapor Tight Linear LED Light

VTS2WDIF-SI-WCOSNeries

Installation

1. Measure and mount the provided mounting brackets.
2. Open housing by unlatching lens and setting it aside.
3. Connect wiring. Note: If running in series, make certain to use the other watertight connector to run wiring out of opposite end of fixture.
4. Reassemble fixture and press light into mounting brackets.

4400 Earth City Expy, St. Louis, MO 63045

866-590-3533

superbrightleds.com



References

Adobe PDF Library 16.0.5 Adobe InDesign 17.1 (Windows)