X-NUCLEO-GFX02Z1

Data brief

Display expansion board for STM32 Nucleo-144

Brand: STMicroelectronics

Features

2.2" 8-bit parallel interface QVGA TFT LCD
64-Mbit Q-SPI NOR Flash memory
Joystick for easy menu navigation
Compatible with selected STM32 Nucleo-144 boards using the Zio connector

Description

The X-NUCLEO-GFX02Z1 expansion board adds graphic user interface (GUI) capability to STM32 Nucleo-144 boards.

It features a 2.2" 8-bit parallel interface TFT display as well as a 64-Mbit Q-SPI NOR Flash memory for storing graphic images, texts, and textures. The expansion board also offers a joystick for GUI navigation.

X-NUCLEO-GFX02Z1 features the Zio connector. It is compatible with the following STM32 Nucleo-144 boards: NUCLEO-F412ZG, NUCLEO-F413ZH, NUCLEO-F446ZE, NUCLEO-F722ZE, NUCLEO-F746ZG, NUCLEO-F756ZG, NUCLEO-F767ZI, NUCLEO-H743ZI, NUCLEO-H723ZG, NUCLEO-H753ZI, NUCLEO-H745ZI-Q, NUCLEO-H755ZI-Q, NUCLEO-H7A3ZI-Q, NUCLEO-L496ZG, NUCLEO-L496ZG-P, NUCLEO-L4A6ZG, NUCLEO-L4P5ZG, NUCLEO-L4R5ZI, NUCLEO-L4R5ZI-P, NUCLEO-L552ZE-Q, and NUCLEO-U575ZI-Q.

Image Description: The document includes an image showing the top view of the X-NUCLEO-GFX02Z1 board, labeled as "Picture is not contractual."

Ordering Information

To order the X-NUCLEO-GFX02Z1 expansion board, refer to Table 1.

Table 1. Ordering information
Order code	Board reference	User manual
X-NUCLEO-GFX02Z1	MB1818	UM2905

Note: The STM32 Nucleo-144 boards feature STM32 32-bit microcontrollers based on the Arm® Cortex®-M processor. Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.

Product marking

The stickers located on the top or bottom side of the PCB provide product information:

Product order code and product identification for the first sticker
Board reference with revision, and serial number for the second sticker

On the first sticker, the first line provides the product order code, and the second line the product identification.

On the second sticker, the first line has the following format: "MBxxxx-Variant-yzz", where "MBxxxx" is the board reference, "Variant" (optional) identifies the mounting variant when several exist, "y" is the PCB revision and "zz" is the assembly revision, for example B01. The second line shows the board serial number used for traceability.

Evaluation tools marked as "ES" or "E" are not yet qualified and therefore not ready to be used as reference design or in production. Any consequences deriving from such usage will not be at ST charge. In no event, ST will be liable for any customer usage of these engineering sample tools as reference designs or in production.

"E" or "ES" marking location is next to the evaluation tool ordering part number that is stuck or silk-screen printed on the board.

Development environment

Demonstration software

The demonstration software supporting the X-NUCLEO-GFX02Z1 expansion board is available from the X-CUBE-DISPLAY STM32Cube Expansion Package and must be programmed into the corresponding Nucleo-144 board.

The latest versions of the demonstration source code and associated documentation can be downloaded from www.st.com.

Revision history

Table 2. Document revision history
Date	Revision	Changes
9-Sep-2021	1	Initial release.

IMPORTANT NOTICE - PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

	X-NUCLEO-GFX02Z1: STM32 Nucleo-144 Display Expansion Board User Manual User manual for the STMicroelectronics X-NUCLEO-GFX02Z1 expansion board, featuring a 2.2-inch TFT display and joystick for STM32 Nucleo-144 development boards. Learn about its features, compatibility, and usage.
	X-NUCLEO-GFX02Z1 User Manual: STM32 Nucleo-144 Display Expansion Board Explore the X-NUCLEO-GFX02Z1, an expansion board from STMicroelectronics that adds a 2.2-inch TFT display and GUI capabilities to STM32 Nucleo-144 development boards. Features include a joystick and Q-SPI NOR Flash memory.
	STM32 Nucleo-144 Boards: Features, Specifications, and Ordering Information \| STMicroelectronics Comprehensive data brief for STMicroelectronics STM32 Nucleo-144 development boards, detailing features, specifications, available models, development environment, and ordering information.
	Getting Started with MotionPM Real-Time Pedometer Library in X-CUBE-MEMS1 for STM32Cube This document provides a guide to getting started with the MotionPM middleware library, part of the X-CUBE-MEMS1 software for STM32Cube. It explains how to use the library to acquire accelerometer data and provide real-time information on steps and cadence, compatible with various STM32 microcontrollers and development boards.
	STM32 Nucleo-144 Boards User Manual User manual for STMicroelectronics STM32 Nucleo-144 development boards, detailing features, hardware layout, configuration, and usage for prototyping with STM32 microcontrollers. Includes model numbers like NUCLEO-F746ZG, NUCLEO-F446ZE, and support for Arm Mbed.
	STM32 Nucleo-144 Boards Data Brief - STMicroelectronics Detailed data brief for STMicroelectronics STM32 Nucleo-144 boards, covering common and board-specific features, an extensive list of available models with their differentiating features, product codification, development environment requirements, and revision history. These boards offer an affordable and flexible platform for developing prototypes with STM32 microcontrollers.
	STM32 Nucleo-144 Boards: User Manual & Development Guide \| STMicroelectronics Discover the STM32 Nucleo-144 boards, a versatile development platform from STMicroelectronics. This comprehensive user manual details features, hardware, quick start guides, and compliance information for prototyping with STM32 microcontrollers. Learn more at www.st.com and mbed.org.
	Getting Started with MotionCP Real-Time Carry Position Library for STM32Cube This document provides a guide to using the MotionCP middleware library, part of the X-CUBE-MEMS1 expansion for STM32Cube, to detect real-time carry positions of a device using ST MEMS sensors.