Want to start a program or choose a custom frequency? Learn how to set up a program in the Quick Start mode, or how to customize the settings and frequencies in Advanced Mode.
QUICK START
- Click Quick Start and choose your desired predefined program.
- Select the desired duration and place the NeoRhythm device close to the area represented by the blue dots [target area].
- Once the program is running, the device will no longer need a mobile device to run (Bluetooth can also be switched off).
- Once the session is finished, the device will signal its ending by double vibration and a change from green to orange indicator lights.
- There is no OFF button; when you are done, just place the NeoRhythm device somewhere where you won't bump it.
The NeoRhythm app interface shows program selection. One screen displays 'Energy and Vitality' with program details: Dominant frequency 40.5 Hz, Magnetic flux density 2.5 mT; Accompanying frequency 54 Hz, Magnetic flux density 0.5 mT. Recommended use is 30 min per session, up to 1-2x per day. The program description states it re-energizes cells and invigorates body & mind, suitable for use before or after intense physical activity or when feeling tired.
ADVANCED MODE
Advanced Mode allows you to customize your sessions by choosing one frequency from the list. You can follow the Programs Guide for suggestions, or get the full list of frequencies and their benefits under the Programs Guide tab.
NeoRhythm devices operate with the highest intensity of 2.5 mT. This is also the highest intensity for the majority of NeoRhythm's Quick Start programs. If you wish to try out a lower intensity, which may have a more beneficial effect, you can tone it down to 1.5 mT or 0.5 mT. It is recommended to start with 2.5 mT and experiment with the other two if you do not feel the desired effect after 3 sessions.
You cannot overdose on PEMF, nor can you harmfully overstimulate yourself using NeoRhythm devices, since all frequencies are in the extremely-low range. When choosing duration, be mindful of what you are trying to achieve and for how long. The device allows you to choose sessions long from 1 minute - 13 hours.
For more advanced users, who want only to stimulate one part of the targeted area, a feature has been created so that they can have total control of the stimulation. If you are new to this, choose all coils, as this is the standard for all of NeoRhythm's Quick Start programs and allows for a full-range stimulation.
The NeoRhythm app interface for custom program setup displays options for 'CHOOSE POWER' (e.g., 2.5 mT), 'CHOOSE COILS' (e.g., All), 'CHOOSE FREQUENCY' (e.g., 50.57 Hz), and 'CHOOSE DURATION' (e.g., 1m), with a 'Start program' button.
