Welcome to RAB
Instruction Manual for RAB models including: MVS50 Microwave Sensor, MVS50, Microwave Sensor, Sensor
MVS SENSOR KIT IP65 | Crescent Electric Supply Company
File Info : application/pdf, 4 Pages, 3.29MB
DocumentDocumentMVS50 - MICROWAVE SENSOR MVS50 OPTIONAL REMOTE Not Included (Order MSR1) PERFORMANCE Operating voltage Operating current Output Brightness Detection area / Sensitivity Hold time Daylight threshold Stand-by period Stand-by dimming level Detection angle Mounting height Detection range Operating temperature IP rating 30-50ft Height RoHS IP RATING 10.5 - 15V 30mA DIM 0-10V 70%/80%/90%/100% 25%/50%/75%/100% 5s/30s/1min/3min/5min/10min/20min/30min Disable, 2lux, 10lux, 30lux, 50lux, 80lux, 120lux, 200lux, 250lux, 300lux, 350lux, 400lux 0s, 10s, 30s, 1min, 5min, 10min, 30min, 60min, + 10%/20%/30%/50% 30-150° Max Diameter 50ft (ceiling mounted) Max Diameter 50ft (ceiling mounted) -20°C ~ +70°C (-4°F ~ 158°F) IP65 Page 1. MVS50 - MICROWAVE SENSOR MVS SENSOR FACTORY SETTINGS BRIGHTNESS HOLD TIME DAYLIGHT SENSITIVITY STAND-BY DIMMING LEVEL STAND-BY TIME 100% 1 Minute Disabled 50% 20% 1 Minute DIMENSIONS (UNIT: INCH) 3/4" 1" DETECTION COVERAGE (UNIT: FEET) Ceiling Mounted 1.5 - 3 ft/sec 10 20 Mounting Height 30 40 50 30 24 18 12 6 0 6 12 18 24 30 Ø 2-1/8" Ø 7/8" Highest mounting height is 50ft (optimal performance is 30ft) This figure indicates the maximum distance at the highest mounting height with 100% sensitivity. Well Detected Area Possibly Detected Area Page 2. MVS50 - MICROWAVE SENSOR LUX ON-OFF Sensor automatically turns on light when ambient brightness is lower than preset lux level. Following preconditions apply to use the Lux On-Off function: Use below settings for the Lux on-off function: · Stand-by period: Set to infinity () · Stand-by dimming level set to: 10%, 20% or 30% (only) · Daylight threshold set to: 30lux, 50lux, 80lux or120lux, 200lux, 250lux, 300lux, 350lux, 400lux Lux off Lux on light on automatically Natural light light off automatically 1. With daylight Lux setting selected Hold time With insufficient ambient brightness, sensor turns on light and keeps it at standby dimming level even if there is no motion or presence. When sensor detects motion or presence it will bring the light level up to 100%. After motion is no longer detected, fixture remains at 100% for hold time. Stand-by period After pre-set hold time period it will dim light to standby dimming level again and always keep it. With sufficient ambient brightness, sensor will turn OFF light automatically. Page 3 . MVS50 - MICROWAVE SENSOR 2. MICROWAVE Sensor With daylight threshold disabled Sensor turns ON light when motion is detected. Hold time Sensor keeps for a hold time period after motion leaves. Stand-by period Sensor dims light to standby dimming level after hold time if there is still no motion. 3. With daylight threshold Sensor turns OFF light after standby period. Stand-by period With sufficient daylight, the sensor keeps light OFF even when motion gets detected. With insufficient daylight, the sensor turns light ON when motion is detected. Hold time Stand-by period After there is no motion detected, the sensor keeps light ON 100% for holdtime. After holdtime, sensor dims light to standby dimming level for standby period. If the standby period has been set as 0S, sensor turns light OFF automatically after holdtime. The sensor turns OFF light automatically after the standby period when there is no motion detected. Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance. © 2022 RAB LIGHTING Inc. MVS50 - IN -0822 P-100162 Easy Answers rablighting.com Visit our website for product info Tech Help Line Call our experts: 888 722-1000 e-mail Answered promptly - sales@rablighting.com Free Lighting Layouts Answered online or by request Page 4. .