Xiaomi Smart Tower Fan User Manual

Safety Instructions

Read this manual carefully before use, and retain it for future reference.

WARNINGS

Improper use may lead to electric shocks, fire, personal injury, or other damage.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Ensure that the fan is switched off from the supply mains before removing the guard.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.

Precautions

Installation

• To avoid electric shocks, fire, personal injury, or other damage, make sure the fan is properly installed according to the instructions in this user manual.
• Do not connect the fan to the electrical outlet until the fan is fully assembled.

Transportation

• Turn off and unplug the fan before moving it.
• When moving the fan, hold it steady to avoid damage to the fan itself or personal injuries caused by the fan falling down.

Using the Fan

• Stop using the fan immediately if it makes unusual sounds, gives off odors, gets too hot, topples over, shakes, or has other errors.
• Do not shake the fan manually so as to avoid damage to its internal mechanism.
• Do not lean on or tilt the fan while it is running.

Power Cord

• Disconnect the fan from the electrical outlet before maintaining or moving it.
• Always unplug the fan by pulling the power plug rather than the cord.

• Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.
• Do not use this fan in a place where it will easily fall over or where there are other unstable objects nearby.
• Do not use this fan in hot and humid environments such as a bathroom.
• Do not use the fan if its power cord is damaged or its power plug is loose.
• Do not use the fan if its rear grille is not installed, becomes loose, or comes off.
• Do not allow children or adults who are incapable of operating this fan to use this product.
• Do not attempt to disassemble or repair this fan by yourself.
• Do not excessively pinch, bend, or twist the power cord as this may expose or break its core.
• Do not poke fingers or foreign objects into the grilles or the rotating fan blade.
• Keep hair and fabrics away from the fan to prevent them from being caught in the fan.
• Do not use any improper power outlet.
• Disconnect the fan from the electrical outlet before removing its rear grille.

Package Contents

• 1. Fan
• 2. Front Base
• 3. Rear Base
• 4. M5 Screw × 2
• 5. Hex Key
• 6. User Manual

Note: Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.

Product Overview

Top View

• Scheduled Turn-off Button
• Speed/Scheduled Turn-off Indicator
• Wi-Fi Indicator
• Oscillation Button
• Sleep Mode Indicator
• Mode Switch Button
• Natural Breeze Indicator
• Direct Breeze Indicator
• On/Off Button
• Speed Adjustment Button

Fan Structure

• Base
• Front Grille
• Fan
• Rear Grille
• Power Cord Groove

Bottom View

Details of bottom view components are not explicitly described in the provided text.

How to Install

Step 1: Assemble the base

1. Pass the power cord from the bottom of the fan through the round hole in the center of the base.
2. Align the dowel pins of the rear base with the dowel holes of the front base and press them into place, so that the rear base and the front base are assembled into a flat one.

Step 2: Install the base

1. Place the fan horizontally on a soft surface. Then insert the D-shaped dowel pin at the bottom of the fan into the D-shaped dowel hole of the base, and press to install the base onto the fan.
2. Put two M5 screws into the screw holes of the base and tighten the screws clockwise with the hex key.

Step 3: Organize the power cord

Install the power cord into the groove at the bottom of the base, and pass it through the end of the groove to complete the installation of the fan.

Note: Properly straightening out the power cord and installing it into the groove can help keep the power cord from breaking.

How to Use

Connecting to an electrical outlet

Plug the power plug into a suitable electrical outlet. When you hear a beep, the fan is successfully connected to the power.

Turning on/off

• Press the button to start the fan. When turned on for the first time, the fan is at the direct breeze mode with speed 1, by default.
• Press the button to stop the fan while it is running.

Switching the Speed

Press the button to adjust the speed, and the corresponding speed indicators will light up. After the fan is turned off and turned back on again, the speed will be the last used one.

Note: • means the indicator is on; • means the indicator is off.

Switching Mode

Press the button to switch among the direct breeze, the natural breeze, and the sleep mode, and the corresponding indicator will light up. After the fan is turned off and turned back on again, the mode will be the last used one.

Setting the Oscillation

Press the button to enable or disable oscillation. You can set the oscillation angle range in the app. After the fan is turned off and turned back on again, the oscillation setting will be the last used one. Unplug then plug the fan in or reset the Wi-Fi connection then turn on the fan, the fan will automatically oscillate its angle if enabling the oscillation function. The oscillation time varies depending on different angles, please wait with patience.

Note: When the Wi-Fi connection is reset, the oscillation angle range will change to the default angle of 90°.

Scheduled Turn-off

Press the button to cycle through the scheduled turn-off times: 1 hour, 2 hours, 3 hours, 4 hours, and disabled, and the corresponding indicator(s) will light up. Five seconds after using the scheduled turn-off function, the indicator(s) resume to indicate the corresponding status of the current speed.

Note: • means the indicator is on; • means the indicator is off.

Connecting with Mi Home/Xiaomi Home App

This product works with Mi Home/Xiaomi Home app. Control your device, and interact it and other smart home devices with Mi Home/Xiaomi Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app store to download and install it. Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device.

* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.

Note: The version of the app might have been updated, please follow the instructions based on the current app version.

Connecting to Wi-Fi

Simultaneously press and hold the control buttons. Once you hear a long beep, the fan is awaiting a connection, then you can pair it with a device via the app.

Resetting Wi-Fi Connection

Simultaneously press and hold the control buttons. Once you hear a long beep, the Wi-Fi connection has been reset successfully and then the fan is awaiting a connection. The Wi-Fi connection needs to be reset on the circumstances listed below:

• The Xiaomi account that the fan is paired with has been changed.
• The router that the fan is connected to has been changed.
• The account or password of the router that the fan is connected to has been changed.
• The Mi Home/Xiaomi Home app is unable to control the fan.

Enabling/Disabling Wi-Fi

Simultaneously press and hold the control buttons for seven seconds until you hear a notification sound, and then the Wi-Fi is enabled or disabled.

Child Lock Function

To disable the function of child lock, go to the page of Xiaomi Smart Tower Fan in the Mi Home/Xiaomi Home app, or simultaneously press and hold the control buttons until you hear a long beep.

Note: Resetting the Wi-Fi connection or unplugging and plugging in the fan again can also disable this function.

Care & Maintenance

Washable Parts: Rear Grille & Fan Blade

After the rear grille and the fan blade are removed, you can clean these parts with a soft cloth or a sponge using water or dilute neutral detergent.

Notes:

• Make sure the fan is turned off and unplugged before disassembling or cleaning.
• After cleaning, make sure all parts are completely dry before installing them and using the fan again. Do remember to avoid direct sunlight.
• Do not use thinner, gasoline, acidic detergent, or alkaline detergent to clean the parts.

Removing the Rear Grille

1. Use the hex key to turn the screw that secures the rear grille counterclockwise to remove it.
2. Pull the rear grille outwards from the indentation at the top of the rear grille to remove it.

Note: When installing the rear grille back, first insert the plugs at the bottom of the rear grille into the slots of the rear shell, and then click the rear grille into place from the bottom to the top.

Removing the Fan Blade

1. Use the hex key to turn the screw at the bottom of the fan blade counterclockwise to remove it.
2. Push the fan blade upward against the top of the compartment, and then pull it outward to remove it.

Non-washable Parts: Fan & Power Cord

Use a soft, dry cloth to gently wipe the fan and the power cord.

Note: Do not use water or other liquids to clean any parts, except for the rear grille and the fan blade.

Troubleshooting

Specifications

Warranty Notice

This warranty gives you specific rights, and you may have other rights conveyed by laws of your country, province or state. In some countries, provinces or states, consumer law may impose a minimum warranty period. Xiaomi does not exclude, limit or suspend other rights you may have. For a full understanding of your rights, consult the laws of your country, province or state.

1. LIMITED PRODUCT WARRANTY

Xiaomi warrants that the Products are free from defects in materials and workmanship under normal use and in accordance with the user manual during the Warranty Period. Local laws provide details on legal warranties. For more information, refer to Xiaomi's official website: https://www.mi.com/en/service/warranty/. Xiaomi warrants to the original purchaser that its Xiaomi Product will be free from defects in materials and workmanship under normal use. Xiaomi does not guarantee uninterrupted or error-free operation. Xiaomi is not liable for damages arising from non-compliance with the product's instructions.

2. REMEDIES

If a hardware defect is found within the Warranty Period, Xiaomi will either (1) repair the product, (2) replace the product, or (3) refund the Product, excluding potential shipping costs.

3. HOW TO OBTAIN WARRANTY SERVICE

To obtain warranty service, deliver the Product in its original or similar protective packaging to the address specified by Xiaomi. Xiaomi may require proof of purchase and/or registration before service.

4. EXCLUSIONS AND LIMITATIONS

This Limited Warranty applies only to Products manufactured by or for Xiaomi, identified by Xiaomi trademarks. It does not apply to:

• (a) Damage due to acts of nature (lightning, floods, fire, earthquake).
• (b) Negligence.
• (c) Commercial use.
• (d) Alterations or modifications to any part of the Product.
• (e) Damage caused by use with non-Xiaomi products.
• (f) Damage caused by accident, abuse, or misuse.
• (g) Damage caused by operating the Product outside permitted uses or with improper voltage/power supply.
• (h) Damage caused by service performed by non-Xiaomi representatives.

Xiaomi is not responsible for loss or damage to data, software, or other materials stored on the product during service. No Xiaomi representative is authorized to modify this warranty. If any term is held illegal, remaining terms are unaffected. After-sales services are limited to the country/region of original purchase. Products not duly imported, manufactured, or acquired from Xiaomi or its official seller are not covered. Contact the retailer for warranty from non-official sources. Warranties do not apply in Hong Kong and Taiwan.

5. IMPLIED WARRANTIES

Implied warranties (including merchantability and fitness for a particular purpose) are limited in duration to the maximum duration of this limited warranty, unless prohibited by law.

6. DAMAGE LIMITATION

Xiaomi shall not be liable for indirect, special, or consequential damages (including loss of profits, revenue, or data) even if informed of the possibility of such damages, unless prohibited by law.

7. XIAOMI CONTACTS

For customers, visit: https://www.mi.com/en/service/warranty/. Contact persons for after-sale service include Xiaomi's authorized service network, distributors, or the final vendor.