SW7 Smart Switch User Manual and Installation Guide

Introduction

This manual provides comprehensive instructions for the CuCo SW7 Smart Switch. It covers installation, safety precautions, operation, and compliance information.

Product Overview

The SW7 Smart Switch is designed to provide smart control for your home lighting and appliances. It connects to your home Wi-Fi network, allowing control via a mobile application.

Part Description

• 1. Panel: The front face of the switch.
• 2. Indicator Light: Shows the status of the switch (e.g., connected, pairing).
• 3. Button: Primary interface for manual operation.
• 4. Back Panel: Contains the mounting mechanism and internal components.
• 5. Wiring Terminal: Connection points for electrical wiring.

Safety Precautions

WARNING: RISK OF ELECTRIC SHOCK

Please read the following precautions carefully before installation and use:

• Installation and maintenance must be performed by qualified electricians only.
• Always disconnect the power supply at the main circuit breaker before commencing any wiring or installation work.
• Ensure all wiring connections are secure and comply with local electrical codes and regulations.
• Do not install or operate the device in wet, damp, or excessively humid environments.
• Keep the device away from direct heat sources or flammable materials.
• Verify that the voltage and current ratings of the switch are compatible with your electrical system and connected loads.

Installation Instructions

1. Wiring Diagram

Description of Wiring Diagram: The diagram illustrates the electrical connections required for the SW7 Smart Switch. It shows input terminals labeled 'L' (Live/Hot) and 'N' (Neutral) that connect to the main power supply. Output terminals, typically labeled 'L1', 'L2', 'L3' (or similar, depending on the switch configuration), are shown connecting to the controlled loads (e.g., lights). Proper connection of Live and Neutral to the input is crucial for the device to function and connect to Wi-Fi. The diagram emphasizes correct polarity and secure terminal connections.

2. Mounting the Switch

Description of Mounting: The visual depicts the process of installing the smart switch into a standard electrical wall box. After making the necessary wiring connections to the switch's terminals, the switch unit is carefully inserted into the wall box. It is then secured in place using screws, ensuring a flush and stable fit against the wall surface. The faceplate is typically attached last.

Smart Switch Pairing

Note: For initial setup and pairing, ensure your mobile device is connected to a 2.4GHz Wi-Fi network. The SW7 Smart Switch does not support 5GHz Wi-Fi networks.

To pair the switch, download the dedicated mobile application (refer to the app store for availability). Follow the step-by-step instructions within the application to add the SW7 Smart Switch to your account and connect it to your Wi-Fi network.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Certifications

The product is certified with FCC and CE marks, indicating adherence to regulatory standards for electromagnetic compatibility and safety.

Device Views

Front View (正面): This view shows the primary interface of the SW7 Smart Switch, typically featuring buttons and an indicator LED.

Back View (背面): This view displays the rear of the device, highlighting the wiring terminals for power input and load connection, as well as mounting points.