JBL Tune Beam 2 Quick Start Guide

What's in the Box

Contents of your JBL Tune Beam 2 package:

• JBL Tune Beam 2 Charging Case
• JBL Tune Beam 2 Earbuds (Left and Right)
• Ear Tips (Sizes S, M, L)
• USB Charging Cable

[Diagram: Visual representation of all included items.]

App

Download the free JBL Headphones app to gain more control and personalization over your listening experience.

? Search for "JBL HEADPHONES" on the app stores. [Google Play] [App Store]

[Diagram: Mobile phone screen showing app store icons and a QR code to download the app.]

How to Wear

1. Try different ear tip sizes (S/M/L) for a perfect fit and optimal audio performance.

   [Diagram: Shows ear tips and earbuds, indicating size selection.]

2. Insert the earbuds into your ears, rotating slightly for a secure fit.

   [Diagram: Shows earbuds being inserted into an ear.]

First Time Use

Place the earbuds into the charging case to prepare them for their first use.

[Diagram: Shows earbuds being placed into the open charging case.]

Note: The "Ghost Edition" may have specific initial setup steps.

Power On & Connect

Open the charging case to power on the earbuds.

Connecting to your device:

• Others: Go to your device's Bluetooth settings and select "JBL Tune Beam 2" to connect. ?
• Android™: Fast Pair is enabled. The "JBL Tune Beam 2" will appear on devices linked with your account. Compatible with Android phones running version 6+. ?
• Windows 10 v1803+: Microsoft Swift Pair. Your device will detect "New JBL Tune Beam 2". Click "Connect" to pair. ?

[Diagram: Illustrates connection steps for different operating systems, showing Bluetooth symbols and device pairing prompts.]

Dual Connect + Sync

Use both earbuds simultaneously for Stereo mode, or use a single earbud for Mono mode.

[Diagram: Shows the charging case with both earbuds (L/R) for Stereo mode, and a single earbud (L/R) for Mono mode.]

Multi-Point Connection

Connect to a maximum of 2 devices simultaneously.

Actions:

• Tap once ? x 1: Switch between connected devices.
• Hold for 5 seconds ✊ (5s): Enter pairing mode or reset connection.

[Diagram: Shows connections to two devices (e.g., phone and tablet) via Bluetooth.]

Controls

Manage your audio and features with touch controls on the earbuds.

Left Earbud (L):

• ANC (Active Noise Cancelling) ?
• Ambient Aware ?
• TalkThru ?️
• Bixby/Siri®/Others: Tap x1 ? x 1, Tap x2 ? x 2, Tap x3 ? x 3, Hold (2s) ✊ (2s)

Right Earbud (R):

• Play/Pause: Tap x1 ▶️ x 1
• Next Track: Tap x2 ⏩ x 2
• Previous Track: Tap x3 ⏪ x 3
• Voice Assistant (Bixby/Siri®): Hold (2s) ✊ (2s)

[Diagram: Illustrates touch controls on both left and right earbuds, showing icons for functions like ANC, Ambient Aware, Play/Pause, Next/Previous Track.]

* Enable advanced controls by connecting your JBL TUNE BEAM 2 to the JBL Headphones app.

VoiceAware

Adjust how much of your own voice you hear during calls using the VoiceAware feature in the JBL Headphones app.

[Diagram: Shows an app screen with a slider for VoiceAware settings (Low, Mid, High).]

Power Off

Place the earbuds back into the charging case to power them off.

[Diagram: Shows earbuds being placed into the closed charging case.]

Factory Reset

To reset your earbuds to factory settings:

Tap the touch control twice ? x 2, then hold for 5 seconds ✊ (5s).

[Diagram: Shows earbuds and the reset action sequence.]

Charging

Connect the USB-C cable to the charging case. The earbuds will charge automatically when placed inside the case.

Charging Time: Approximately 2 hours from empty.

Quick Charge: 10 minutes of charging provides approximately 3 hours of playback.

[Diagram: Shows a USB-C cable connecting to the charging case, and battery level indicators.]

LED Behaviors

Earbud LEDs:

• Blue flashing: Bluetooth connecting ?
• Solid Blue: Bluetooth connected ✅
• Blue flashing slowly: Bluetooth not connected ❌

Charging Case LEDs:

• Solid Red: Low battery ?
• Pulsing Red: Charging ⚡
• Solid Green: Fully charged ✅

[Diagram: Shows different LED states for earbuds and the charging case.]

Technical Specifications

Model: TUNE BEAM 2

Driver Size: 10 mm / 0.39" Dynamic Driver

Power Supply: 5V ⎓ 1A

Earbud: 5.2 g per pc (10.4 g combined) / 0.0115 lbs per pc (0.0229 lbs combined)

Charging Case: 42 g / 0.0926 lbs

Earbud Battery Type: Lithium-ion battery (65 mAh / 3.85 V)

Charging Case Battery Type: Lithium-ion battery (590 mAh / 3.8 V)

Charging Time: 2 hrs from empty

Music Playtime (BT on, ANC off): Up to 12 hrs

Music Playtime (BT on, ANC on): Up to 10 hrs

Talk Time (ANC off): Up to 6 hrs

Talk Time (ANC on): Up to 5 hrs

Frequency Response: 20 Hz - 20 kHz

Impedance: 16 ohm

Sensitivity: 100 dB SPL@1 kHz

Maximum SPL: 95 dB

Microphone Sensitivity: -38 dBV/Pa@1 kHz

Bluetooth Version: 5.3

Bluetooth Profile Version: A2DP V1.4, AVRCP V1.6.2, HFP V1.8

Bluetooth Transmitter Frequency Range: 2.4 GHz - 2.4835 GHz

Bluetooth Transmitter Power: ≤ 13 dBm (EIRP)

Bluetooth Transmitter Modulation: GFSK, π/4-DQPSK, 8DPSK

Maximum Operation Temperature: 45 °C

[Diagram: Shows IP54 rating symbol.]

Safety & Compliance

FCC/ISED RF Exposure Information and Statement:

This equipment complies with FCC/ISED radiation exposure limits for an uncontrolled environment. The user must follow specific operating instructions for RF exposure compliance. This transmitter must not be co-located or operated with any other antenna or transmitter.

The portable device meets radio wave exposure requirements set by the Federal Communications Commission (USA)/ISED, with a SAR limit of 1.6 W/kg averaged over one gram of tissue.

Warning:

DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

[Icons: CE, UKCA, Recycling symbol, Li-ion battery symbol.]

FCC ID: APITUNEBEAM2

IC: 6132A-TUNEBEAM2

Recycling Information: This device, its accessories, and cords are recyclable. [Collection points: www.quefairedemesdechets.fr]

Bluetooth® Trademarks: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Use by HARMAN International Industries, Incorporated is under license. Other trademarks are their respective owners.

Other Trademarks: Google, Android and Google Play are trademarks of Google LLC.

Product Information: Contains non-replaceable batteries. Battery type: 1250PF4D, normal voltage 3.85V.

CMIIT ID: 24J99830E413

Manufacturer: Harman International Industries, Incorporated

[Note: Product specifications and app screens are subject to change without notice. Document version: HP_JBL_TUNE BEAM 2_QSG_Global_CR_V8]