QSFPTEK - Trusted Transceivers, Optical Network Solution Partner
Owner's Manual for QSFPTEK models including: S7600 Series Routing Switch, S7600 Series, Routing Switch, Switch
S7600-48Y8C, 48-Port Ethernet L3 Data Center Switch, 48x 25Gb SFP28, 8 x 100Gb QSFP28ï¼Support MLAGï¼ VXLAN
File Info : application/pdf, 14 Pages, 416.53KB
DocumentDocumentwww.qsfptek.com S7600 Series Routing Switch I. Product Overview The QSFPTEK S7600 Series Routing Switches (whose abbreviation is "S7600") are high performance 1GE/10GE/40GE/100GE switches designed based on ethernet switching chip CTC7132. S7600's product position is to meet the requirements of next generation Enterprise, Data Center, Metro and HCI (Hyper-Converged Infrastructure) networks. S7600's QSFPTEKOS system software supports mainstream protocols and applications which can be conveniently deployed and managed. S7600 currently provide the following configurations: S7600-24X2C: Standard 1U 19'' rack mountable; 24x10/100/1000 Base-T ports; 8x10GE SFP+ ports; Dual modular AC power supply. S7600-24X2Q: Standard 1U 19'' rack mountable; 48x10/100/1000 Base-T ports; 4x10GE SFP+ ports; Dual modular AC power supply. S7600-32C: Standard 1U 19'' rack mountable; 24x10/100/1000 Base-T ports; 8x10GE SFP+ ports; Dual modular AC power supply. S7600-48X8C: Standard 1U 19'' rack mountable; 48x10/100/1000 Base-T ports; 4x10GE SFP+ ports; Dual modular AC power supply. S7600-48Y8C: Standard 1U 19'' rack mountable; 48x1GE SFP ports; 4x10GE SFP+ ports; Dual modular AC power supply. Front Panel of S7600-24X2C Front Panel of S7600-24X2Q Front Panel of S7600-32C Front Panel of S7600-48X8C Front Panel of S7600-48Y8C Rear Panel of S760024X2C Rear Panel of S7600-24X2Q Rear Panel of S7600-32C Rear Panel of S7600-48X8C Rear Panel of E680-48X8C sales@qsfptek.com [1] www.qsfptek.com II. Product Characteristic Based on Carrier Grade High Performance Chip S7600 series routing switches, which are designed based on Ethernet switching chip CTC7132. The CTC7132 is Carrier Grade high-performance chip which help the S7600 to meet the requirement of Metro/Enterprise/Data Center/HCI networks. Varied Port Types Support 1G / 10G / 25G / 40G / 100G ports to meet different network requirements. System Design for Green and Energy Saving Intelligent FAN adjustment and real-time power consumption monitoring technology are provided for the cost of maintenance redundancy and help to build a green and energy saving data center. Customized Profile for Different Deployment Scenarios The Flexible Table Management (FTM) technology offers multiple table size configuration profiles as optimized choices for different network scenarios. Support up to 96K MAC address tables. Support up to 56K IP routing tables. Intelligent Ethernet OAM: completed network fault management and performance guaranty With the IEEE802.1ag and ITU-T Y.1731 end-to-end OAM, Ethernet service providers can monitor the services, survey the end-to end performance and ensure the service quality match the agreement. The fault management technique includes CCM, LTM and LBM. Performance targets include measure for latency and jitter. S7600 Support remote managementnetwork monitoringnetwork fault indicationremote loopback and MIB parameter retrieval according to the standard 802.3ah EFM. Data Center Features S7600 support leading edge Data Center features: Priority Flow Control (PFC), explicit Congestion Notification (ECN) and Data Center TCP, etc. Support MLAG (Multi-Chassis Link Aggregation) to aggregate links across different devices. MLAG can build an Active-Active system to improve the reliability of the network links from single board grade to device grade. MLAG use a peer link between to devices to aggregate two devices and make them as one device logically. Ports of two different devices join the aggregate ports together and all port can transmit the data traffic. MLAG need to management the device respectively, but the configurations are easier than stacking, reboot is NOT required after MLAG is configured. Forwarding and configuring are processing on local device, in normal condition the traffic do NOT transmit trough the peer link, the bandwidth of peer link is not the bottleneck of the network and the latency is low. Support overlay technology (include NVGRE/VXLAN/GENEVE etc.). Overlay can make layer2 packets across sales@qsfptek.com [2] www.qsfptek.com the layer3 networks by using NVGRE/VXLAN/GENEVE header to encapsulate the entire Ethernet packets. Overlay resolves the problem of MAC table size limitation in traditional layer2 networks, resolves the problem of VLAN id count limitation, and resolves the problem network dynamic adjustment which cannot achieve by VLAN/VPN. Use VXLAN for example, 24 bits VNI identifier can support at most 16777215 logic networks, layer2 networks built by VXLAN can keep the same IP/MAC etc. when move the virtue machine. MLAG and overlay features are also good candidates for switches in data center network. S7600 supports RPC-API for SDN(Software Defined Network). SDN is a new architecture of network which can substantially simplify the management and maintenance by separating the control plane and data plane of the network. High Reliability S7600 are powered by Hot-swappable power modules which supports AC/DC 1+1 redundancyFans support 2+1 redundancy Support Real-time environment monitoring technology to detect the chipset temperature, status of fan and power, etc. Support LACP / ECMP / VRRP / VARP / STP/RSTP/MSTP / Smart Link / BFD / ERPS / G.8031 / G.8032 / Load-Balancing, etc. to protect the network traffic all-around effectively. Patented technology "Sysmon" for CPU status monitoring can take action when system is error. Outstanding QoS Control S7600 provides 10hardware queues per-port (8 unicast queues, 1 multicast queues, and 1 monitor queue).Support multi-stage scheduling technology such as WDRR (Weighted Deficit Round Robin) / SP (Strict Priority) and TD (Tail Drop) / WRED (Weighted Random Early Detection) to prevent congestion. Support flexible queue scheduling mechanism to do the shaping for queue or port traffic. Ingress and egress policer provide intelligent bandwidth monitoring, which support to adjust the granularity according to the port speed. Both srTCM (Single Rate Three Color Marker) and trTCM (Two Rate Three Color Marker) can be supported. Triple-play Service Support with Bandwidth Guaranty for High Quality Application S7600 offers high bandwidth for Triple-Play services such as IPTV, video monitoring. The built-in QoS capabilities and flexible queuing technologies guarantee high quality of services. Rich multicast protocol set (IGMP Snooping, IGMP v1/v2, PIM-SM) support up to 2K multicast groups and 4K logical replications per group. With QSFPTEKOS software, IPTV service and multicast latency control are fully supported. Comprehensive Network Security Policy S7600 supports subscriber-class / switch-class / network-class security control. IPv4 / IPv6 / MAC ACL can filter IPv4 / IPv6 / Non-IP packet respectively. Besides that, extended IPv4/IPv6 ACL which can match Layer2 / layer3 / layer4 information in one rule is available. The ACLs can apply to physical ports / vlan / port group / vlan group. The members of port group or vlan group share a set of ACLs and save the TCAM resource. ARP Inspection and IP Source Guard features prevent network from malicious ARP attack. Support CPU Traffic Protection, Storm Control and CPU load optimization features. Support centralized 802.1x sales@qsfptek.com [3] www.qsfptek.com authentication feature to forbidden illegal user accessing network.. Convenient Management Features Support varied management interfaces, include console port / in-band network ports / out-of-band network port / USB port. Support SNMP v1/v2/v3, Support CLI (Command Line Interface), web management, Telnet and FTP connection. Support OAM to make management more convenient, and support SSH2.0, SSL, etc. to ensure security of management. III. Product Specifications Items S7600-48T4X S7600-48S4X S7600-24T8X Size (H×W×D) 4.36 x 44.0 x 37.0cm (1.73 x 17.5 x 14.6 in.) Weight 5.1KG 6.25KG 6KG RS-232 Ports Serial 1 RJ-45 port located at the left side of front panel Management Ports 1 RJ-45 out-of-band management port located at the left side of front panel USB Ports 1 Type-A USB port located at the left side of front panel 10/100/1000Mb 48 - 24 Base-T Ports 1Gb SFP Ports - 48 - 10GbE SFP+ 4 4 8 Ports 25GbE SFP28 - - - Ports 40GbE QSFP+ - - - Ports 100GbE QSFP28 - - - Ports 10/100/1000Mb - - - Base-T POE Ports Latency Min: 660ns CPU SOC(Dual core/ARM A53) Memory 2 GB Flash 8 GB (eMMC) Packet Memory Buffer 9 MB Power AC Operating Voltage: 100 ~ 240V; 50/60Hz supply Maximum Voltage : 90 ~ 264V; 47~63Hz sales@qsfptek.com [4] www.qsfptek.com Items S7600-48T4X S7600-48S4X DC Operating Voltage : -48 ~ -60V Airflow Option Front-Rear Hot-swappable Fans 2 (1+1 redundant) Typical Draw Power 42W 58W Max Power Draw 55W 70W MTBF(Hour) 204935 189901 MTBF(Year) 23.39 21.68 S7600 Series System Specifications Table 3-1 Series System Specifications Description Operating Temperature 0 to 45 ºC S7600-24T8X NOT support 1 Fixed AC power supply 41W 55W 204935 23.39 Specification Storage Temperature -40 to 70 ºC Relative Humidity 0 to 95% (non-condensing) Table 3-2 Environment Specifications Description Safety Certifications Electromagnetic Emissions Certifications Warranty Specification Ready to CE Marking Ready to FCC Part 15 Class A Ready to CE Limited warranty Table 3-3 Safety and Compliance Description Safety Certifications Electromagnetic Emissions Certifications Warranty Specification Ready to CE Marking Ready to FCC Part 15 Class A Ready to CE Limited warranty sales@qsfptek.com [5] www.qsfptek.com S7600 Series Service Specifications Table 3-4 Service specifications Features S7600-48T4X S7600-48S4X S7600-24T8X Line speed forwarding Switch capabi lity Throu ghput 176 Gbps 132 Mpps 176 Gbps 132 Mpps 208 Gbps 155 Mpps Forward mode Support store-forward mode and cut-through mode Ethernet features Support full duplex, half duplex, and auto-negotiation duplex Support auto-negotiation port speed Support Jumbo Frame Support Flow Control Support Storm Control Support Port-block Support Port-isolate Support L2 Protocol Tunneling VLAN features Support 4094 VLANs Support VLAN access mode: Access /Trunk Support Default VLAN Support VLAN Classification Support basic QinQ, selective QinQ and VLAN Mapping Support VLAN statistics Support Private VLAN Support Guest VLAN Support Voice VLAN MAC Address Table Support static MAC address Support dynamic MAC address learning and aging Support hardware learning Support black hole MAC address Support MAC Flapping detect Link aggregation Support Static Link aggregation Support LACP Support Static load balancing Support dynamic load balancing (DLB) Support Self-healing Support port priority and active-standby mode sales@qsfptek.com [6] www.qsfptek.com Reliability features ARP features IPv6 forwarding Multicast features Metro features Support STP/RSTP/MSTP protocol Support STP Protocol Protection (BPDU Filter/Guard, Root Guard, Loop Guard, Anti TC-BPDU attack) Support Single ERPS ring / tangent ERPS rings / intersecting ERPS rings Support ERPS compatible with RRPP Support G.8031 Support G.8032 Support port Loopback Detect Support BFD Support VRRP Support MLAG Support Ethernet OAM: EFM/CFM/Y.1731 Support Software class process monitoring(Sysmon) Support Hardware Watch Dog Support static ARP Support dynamic ARP leaning and aging Support Gratuitous ARP Support basic ARP-Proxy and local ARP-Proxy Support ICMPv6 Support NDP Support PMTU Support IPv6 static routes Support RIPng Support OSPFv3 Support IPv6 over IPv4 Tunnel Support 6to4 Tunnel Support ISTAP Tunnel Support DHCPv6 Support IPv6 prefix list Support VRRP v3 Support IGMP v1/v2/v3 Support IGMP agent Support IGMP SSM Mapping Support PIM-SM,PIM-SSM,PIM-DM Support MLD v1/v2, MLD v1/v2 snooping Support MVR and MVR6 Support PIM-SM v6 Support LDP sales@qsfptek.com [7] www.qsfptek.com Data center features QOS features Security features Support MPLS Forwarding Support VPWS Support VPLS Support MPLS OAM Support MPLS Stats Support L2VPN/L3VPN Support MPLS ACL Support MPLS QoS Support VARP Support VXLAN Support GRE Tunnel Support NVGRE Tunnel Support GENEVE Tunnel Support DCBX Support priority-based flow control (PFC) Support PFC Deadlock detection Support EVPN Support traffic classification based on COS/DSCP (simple classification) Support traffic classification based on ACL ( complex classification) Support queue scheduling based on traffic classification Support Remark the priority fields(COS/DSCP) of the packet Support flow redirection Support flow mirror Support traffic policing Support traffic shaping Support traffic statistics Support SP(Strict Priority) scheduling Support WDRR (Weighted Deficit Round Robin) scheduling Support SP + WDRR mixed scheduling Support TD(Tail Drop) Support WRED (Weighted Random Early Detection) Support ECN tags based on TD and WRED Support SSH Support Radius Support TACAS+ Support AAA Support port based dot1x and MAC based dot1x authentication/access accounting/keep alive Support configure dot1x Guest via command or Radius server sales@qsfptek.com [8] www.qsfptek.com Support access control list(ACL) Support traffic classification based on source and destination IP / source and destination MAC / source and destination layer for protocol number / VLAN ID Support ACL matching User defined fields (UDF) Support ACL active based on Time-Range Support ARP inspection Support IP source guard Support port security to limit the MAC address learning on interface Support VLAN security to limit the MAC address learning on interface Support CoPP (Control Plane Protect) black & white list and rate limit features Support CPU Traffic Limit Support Prevent DDOS attack Support ACL filtering Telnet/SSH login Support Link-Flapping detection Configuration maintenance Support DHCP Server Support DHCP Relay Support DHCP Snooping Support DHCP Client Support DHCP Option82 Support RMON Support sFlow Support IP SLA Support IPFIX and MFP and Support SGT Support Latency/Buffer Monitor Support EFD (Elephant Flow Detection) Support NTP Support port Errdisable state detection and recovery Support configure static DNS client Support LLDP Support port loopback Support hardware loopback (internal/external) Support to configure system time Support to configure time zone Debugging features Support to Debug based on modules Support CPU/memory usage display and alarm Support Device temperature/PSU/FAN/status display and alarm sales@qsfptek.com [9] www.qsfptek.com Management features File system Support user operation logs Support Management of logs, alarms, and debugging information Support VCT (Virtual Cable Test) Support detailed diagnostic-information collection Support reboot information logging Support network diagnostics (ping/traceroute) Support mirror: support use port/VLAN/CPU as mirror source Support use port/port group/ VLAN / CPU as mirror destination Support ERSPAN Support to CPU/From CPU packets statistics Support L2 ping Support UDLD(Unidirectional Link Detection) Support in-band and out-of-band management ports Support privileged user priority and privileged commands Support User block feature Support Network management based on SNMPv1/v2c/v3 Support Public and private MIB Support Public and private Trap Support Configuration and management based on WEB UI Support Configuration and management based on RPC-API Support SmartConfig(Automatically configuration when system start) Support OVSDB Support change the system specifications by choose different STM Profiles Support feature configuration based on License Support restore factory default configuration Support manual/schedule reboot Support upgrade with the local image file/remote TFTP server Support online upgrade Uboot Support file system to manage the files and directories Support upload/download files via FTP/TFTP Support transmit files via Xmodem IV. S7600 Series Manufacturer Part Number Manufact urer Name Safety EMC Certifications S7600-48S4X Wuhan QSFPTEK Communic EN 62368-1: 2020+A11:202 0 EN 55032: 2015 EN 55024: 2010 EN 61000-3-2:2014 CCC CE-LVD CE-EMC sales@qsfptek.com [10] www.qsfptek.com S7600-48T4X S7600-24T8X ations Co., Ltd. Wuhan QSFPTEK Communic ations Co., Ltd. EN62479:2010 EN 62368-1: 2020+A11:202 0 EN62479:2011 EN 2013 61000-3-3: EN 55032: 2015 EN 55024: 2010 EN 61000-3-2:2014 EN 2014 61000-3-3: FCC FCC ICES ETL Wuhan QSFPTEK Communic ations Co., Ltd. EN 62368-1: 2020+A11:202 0 EN62479:2011 EN 55032: 2015 EN 55024: 2010 EN 61000-3-2:2014 EN 2014 61000-3-3: CCC CE-LVD CE-EMC FCC FCC ICES V. Applications HCIHyper-Converged Infrastructure S7600 with 1GE + 10GE/40GE/100GE ports are suitable for HCI Hyper-Converged Infrastructurenetworks. Using 1GE ports for management network and using 10G/40GE/100G ports for data traffic network. The following features of S7600 are available for this case: VLAN, LACP, STP/RSTP/MSTP, MLAG, etc. Enterprise Data Center S7600 series provide 1GE/10GE/40GE/100GE ports for Access or Aggregation switches. The following figure shows a deployment example using the S7600 Series for Data Center Access network topology as TOR access devices The following features of S7600 are available for this case: VLAN, LACP, RSTP&MSTP, MLAG, DCB Features (PFC/QCN/ETS, Data Center TCP), OSPF, QoS, Overlay(NVGRE/VXLAN/GENEVE), etc. sales@qsfptek.com [11] www.qsfptek.com Figure 5-2 Data Center Servers Access Network with S7600 Series Metro L2 Ring Network Ring network topology allows service provider to establish robust network and operate multiple services. The following figure shows the deployment example using the S7600 Series for Metro L2 ring network topology as Aggregation or Access devices. The following features of S7600 are available for this case: QinQ / ERPS / G.8032 / EFM / CFM / LACP / Smart-link, etc. Figure 5-3 Metro L2 Ring Network topology with S7600 Series VI. Ordering Information Table6-1 S7600 Series product Product Number Description S7600-48T4X Standard 1U 19'' rack mountable sales@qsfptek.com [12] www.qsfptek.com S7600-48S4X S7600-24T8X 48x10/100/1000 Base-T ports 4x10GE SFP+ ports Dual modular AC power supply Front-Rear Airflow, fixed FAN Standard 1U 19'' rack mountable 48x1GE SFP ports 4x10GE SFP+ ports Dual modular AC power supply Front-Rear Airflow, fixed FAN Standard 1U 19'' rack mountable 24x10/100/1000 Base-T ports 8x10GE SFP+ ports Dual modular AC power supply Front-Rear Airflow, fixed FAN VII. Extended Optics and Cables Table6-2 Supported Optics and cables Port type Optics and cables Ethernet management port RJ-45 connectors - Cat-5 UTP cabling Note Console port RJ-45-to-DB9 cable for PC connections 10/100/1000BASE-T Ports RJ-45 connectors - Cat-5 UTP cabling 1GE SFP LC fiber connectors Single-mode or Multimode fiber 25GE SFP28 LC fiber connectors Single-mode or Multimode fiber 10GE SFP+ LC fiber connectors - Single-mode or Multimode sales@qsfptek.com [13] www.qsfptek.com Port type 40GE QSFP+ 100GE QSFP28 Optics and cables fiber LC fiber connectors Single-mode or Multimode fiber LC fiber connectors Single-mode or Multimode fiber Note sales@qsfptek.com [14]