Amenée d'air neuf 11044351
COFFRET ALIM 4 MOTEUR OXYT LAMES 2013
Ouvrants et volets de désenfumage
A photograph shows the OXYTONE LAMES 2013 unit in a closed state, with horizontal louvers visible.
Product Overview
The OXYTONE Lames 2013 air supply unit ensures fresh air intake in case of fire and its motorized reset facilitates maintenance.
Key Features
- Remotely resettable version possible.
- Exterior opening.
- Interior GFAP 007 with removable core.
Principles of Operation
The OXYTONE Lames 2013 is a motorized, louvred opening for air supply applications. It opens on command from the CMSI (Centralized Fire Safety Management System). End-of-travel contacts allow monitoring of its position and proper functioning.
Product Description
The OXYTONE Lames 2013 is a motorized, louvred opening for air supply in smoke extraction systems. It is available in standard dimensions ranging from 330 x 600 / 475 x 350 mm up to 1350 x 1100 / 1225 x 1350 mm, with increments of 125 mm. It is also available in insulated and/or motorized reset versions.
Application Areas
- New construction
- Renovation
- Tertiary premises
Installation
- Always keep the louvers in a horizontal position.
- Designed for exterior facade installation:
- On metal walls.
- On concrete walls (a frame is recommended).
- Possibility to install OXYTONE Lames 2013 on wooden walls using an adaptation kit.
Technical Characteristics
- Mechanical shutter made of an anodized natural aluminum frame, with horizontal louvers of the same finish as the frame.
- ISOLEE version with louvers insulated with M1 expanded polystyrene (K=1.55 W/m°C) of 23 mm, enclosed in a PVC housing.
- Triggering mechanism:
- Rod system driven by a rear-mounted spring.
- Electrical connection via a housing.
- Equipped with remote triggering by emission (3.5 W) or current interruption (1.6 W), 24V or 48V.
- Manual reset (standard) or electric reset (24V, optional, factory-fitted or on-site).
- End-of-travel signaling contacts available as an option. These can be doubled.
Dimensions
OXYTONE LAMES 2013 Enclosure (mm)
- Nominal dimensions: L x H.
- Recess dimensions with sealed frame: (L+50) x (H+50).
- Recess dimensions without frame: (L+5) x (H+5).
Enclosure with GFAP 007 (mm)
- Nominal GFAP 007 dimensions: X x Y.
- Selection with frame: X = L, Y = H.
- Selection without frame: X = L - 45mm, Y = H - 45mm.
- Verify that X and Y are multiples of 25mm.
A technical drawing illustrates the OXYTONE LAMES 2013 unit's dimensions. It shows the overall unit with key measurements: Height (H) and Width (L). Specific dimensions indicated are 140mm, approximately 97mm, 126mm, 60mm, and 130mm. It also shows an 'EXTERNAL' and 'INTERIEUR' view, with a label 'L + 80' and 'H + 80' indicating overall dimensions including mounting or casing. Diagrams detailing enclosure requirements are also present. For the OXYTONE LAMES 2013, nominal dimensions are L x H. Recess dimensions with a sealed frame are (L+50) x (H+50). Recess dimensions without a frame are (L+5) x (H+5). Diagrams detailing enclosure requirements for the GFAP 007 accessory show nominal dimensions as X x Y. When selected with a frame, X = L and Y = H. When selected without a frame, X = L - 45mm and Y = H - 45mm. A note specifies that X and Y must be multiples of 25mm.
