HAVIT

Packing List

• Foldable 3 in 1 Wireless Charger*1
• USB-C to USB-C Cable*1
• User Manual*1
• Warranty Card*1

Product Structure

The HAVIT W3100 features a foldable design for versatile charging. Key components and areas include:

• Mobile phone wireless charging area: The main circular pad designed to wirelessly charge a mobile phone.
• Working indicator light: A light on the main charging pad that indicates the charging status.
• USB-C charging port: Located on the stand, used to connect the power adapter via the USB-C cable.
• Earbuds wireless charging area: A smaller circular pad, typically for charging compatible wireless earbuds.
• Watch wireless charging area: An even smaller circular pad, designed for charging compatible smartwatches.

The mobile phone charging stand allows for adjustable angles.

Specifications

• Product Model: W3100
• Product Name: Foldable 3 in 1 wireless charger
• Material: ABS+zinc alloy+aluminum alloy
• Input: 5V=3A, 9V=3A
• Wireless Output:
  • Phone: 15W (compatible with 10W, 7.5W, and 5W)
  • iWatch: 3W (max)
  • Earbuds: 5W (max)
• Size: 72.5*72.5*28mm
• Weight: 160g±5g

Use Instructions

1. Connect one end of the USB-C charging cable to the product's USB-C charging port and the other end to a power adapter. The product will enter its normal working state.
2. Indicator light status: Upon powering on, the indicator light will illuminate blue immediately.
3. The mobile phone charging stand can be adjusted to the user's preferred angle.
4. This product can wirelessly charge three devices simultaneously: a mobile phone, earbuds, and a smartwatch.

Warnings

• Do not disassemble this product by yourself.
• Please do not place this product near heat sources.
• Please do not place this product close to water or in a humid place.

Compliance Information

CE Marking: The product meets relevant European Union directives.

Recycling Symbol: ♻️ Please dispose of this product responsibly.

FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.