Tenera 2 by Lovense
Product Overview
The Tenera 2 by Lovense is a sophisticated adult toy designed for enhanced user experience. This document outlines its features, operation, and care.
Key Features and Operation
- Charging: The device indicates charging status. A solid red light typically signifies charging, and it turns off when fully charged.
- Turning On/Off: Press and hold the power button (Button A) for 3 seconds to turn the device on or off.
- Suction Modes:
- Increase Suction: Single tap Button A.
- Decrease Suction: Single tap Button B.
- Self-Cleaning: The device can be cleaned using a self-cleaning function. Turn the device on to its highest suction level and submerge it in water for 1 minute.
- Waterproof Rating: The Tenera 2 is IPX7 waterproof, allowing submersion up to 1 meter for cleaning or use.
- Indicator Light: Provides visual feedback on the device's status.
- Charging Port: Located for easy access.
Connectivity and Control
The Lovense Tenera 2 can connect to other Lovense toys and a PC using a Lovense USB Bluetooth adapter. For a complete user manual and additional information, visit lovense.com.
QR Code: A QR code is provided to access product instructions online.
Important Safety Precautions and Warnings
Please adhere to the following guidelines to ensure safe and optimal use of your Tenera 2:
- DO NOT boil the device in water, as this may cause the battery to explode or water to leak into the toy.
- Keep the device away from extreme heat or cold.
- Ensure the toy is recharged at least once every six months to maintain battery health.
- DO NOT use the toy while it is charging.
- Avoid attaching the charging cable to any metal or stainless steel materials.
- When cleaning or during use, do not submerge the device in water deeper than 1 meter.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.