MONDOLUX 2 Pin Flex and Plug

Product Code: AGLO-EU-PLUG

Manufacturer: Mondolux

Installation Manual

This document provides installation guidance for the Mondolux AGLO-EU-PLUG 2 Pin Flex and Plug power cord. It includes compliance information, installation steps, and manufacturer details.

Compliance and Notes

Compliance Standard: This product complies with EN 50075:1990, which specifies flat two-pole plugs without reconnectable features, without ground contact, rated voltage 250 V AC, and rated current 2.5 A. The product also bears CE and RoHS compliance marks.

Do not interchange any parts of this product.
If you have any questions regarding the installation of this product, please contact Mondolux.

(Note: Detailed information is also provided in French, German, Italian, Polish, and Spanish.)

Installation Steps

Unscrew the latches on the base side of the remote controller.
Disconnect the existing flex cable from the controller.
Insert 2 wires into each socket on the primary side of the controller.
Screw the latches back onto the controller.
Installation is complete.

Installation Diagram

A visual representation is provided to illustrate the physical connection points and steps for wiring the flex and plug. This diagram typically shows how to open the plug, connect the wires to the appropriate terminals, and reassemble the plug securely.

Manufacturer and Importer Details

Manufacturer

Company: Mondolux

Address: 10 Plane Tree Ave, Dingley Village VIC, 3172, Australia

Phone: +61 9551 3748

Web: www.mondolux.com.au