Instruction Manual for GREISINGER models including: LF 425 Conductivity Measuring Cell, LF 425, Conductivity Measuring Cell, Measuring Cell
GREISINGER LF 210 (01) PDF MANUAL - Manual-Hub.com
File Info : application/pdf, 4 Pages, 975.14KB
DocumentDocumentZ42.0.11.6C-01 Conductivity measuring cell as of version 1.7 Operating Manual LF ... LF 425 LF 400 LF 210 WEEE-Reg.-Nr. DE 93889386 GHM Messtechnik GmbH · Standort Greisinger Hans-Sachs-Str. 26 · D-93128 Regenstauf +49 (0) 9402 / 9383-0 +49 (0) 9402 / 9383-33 info@greisinger.de https://manual-hub.com/ Z42.0.11.6C-01 Operating Manual LF ... RW Page 2 of 4 CONTENTS 1 Intended use .......................................................................................................................... 2 2 General advice ....................................................................................................................... 2 3 Safety instructions .................................................................................................................. 2 4 Operating and maintenance: .................................................................................................. 3 5 General information about conductivity measuring ................................................................ 3 6 Disposal notes........................................................................................................................ 3 7 Assignments........................................................................................................................... 4 8 Specification ........................................................................................................................... 4 1 Intended use Measurements of conductivity resistivity, salinity and TDS fitted with the devices GMH 5430/50, GHM Silverline SLC Applications: Aquaristics , Fish farming Drinking water petrol, diesel: LF 210 etc. 2 General advice Read through this document attentively and make yourself familiar to the operation of the device before you use it. Keep this document in a ready-to-hand way in order to be able to look up in the case of doubt. 3 Safety instructions This device has been designed and tested in accordance to the safety regulations for electronic devices. However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures and special safety advises given in this manual will be adhered to when using it. 1. Trouble-free operation and reliability of the device can only be guaranteed if it is not subjected to any other climatic conditions than those stated under "Specification". 2. Warning: Do not use this product as safety or emergency stop device or in any other application where failure of the product could result in personal injury or material damage. Failure to comply with these instructions could result in death or serious injury and material damage https://manual-hub.com/ Z42.0.11.6C-01 Operating Manual LF ... RW Page 3 of 4 4 Operating and maintenance: Treat device and probes carefully. Use only in accordance with above specification. (do not throw, hit against etc.). Protect from soiling. The measuring cell must never come into contact with water-repellent materials such as oil or silicone. Cleaning Contamination Cleaning Solution water soluble deionized water grease , oil warm water and household cleaning solution 5 General information about conductivity measuring Basically there are two types of measuring cells: 2-pole and 4-pole cells. The operation is done similarly; the 4-pole measuring cells can compensate polarization effects and up to some degree soiling due to its complex measuring method. 2-pole measuring cell 4-pole measuring cell The selection of a suitable electrode depends on the desired application. The widest range of application is guaranteed by high-quality 4-pole graphite measuring cells (LF 400 or LF 425, all the above applications and: seawaters, titration and sewage). 2-pole platinum electrodes with glass shaft are good solution for used in petrol, diesel, etc. with low conductivities (< 1000 µS/cm) (LF 210) 6 Disposal notes This device must not be disposed as "residual waste". To dispose this device, please send it directly to us (adequately stamped). We will dispose it appropriately and environmentally friendly. https://manual-hub.com/ Z42.0.11.6C-01 7 Assignments Front View Operating Manual LF ... RW Pin LF 210 1 measuring cell 1 2 measuring cell 1 3 measuring cell 2 4 measuring cell 2 5 temperature 6 temperature 7 Not connected LF 400 / 425 supply 1 signal 1 signal 2 supply 2 temperature temperature Not connected Page 4 of 4 8 Specification Measuring Cell number of electrodes Material materials in contact to media Cell constant Temperature measurement Sensor Meas. Ranges Conductivity Temperature Dimensions Shaft diameter Shaft length Cable length Immersion depth Guarantee Accuracy Conductivity: depending on display instrument Temperature Nominal temperature Ambient temperature Storage temperature Connection LF 210 2 platinum glass platinum 1 ± 0,2 cm-1 FL 400 4 graphite 316 stainless steel graphite epoxy 0,55 ± 0,04 cm-1 LF425 4 graphite PVC-C graphite epoxy 0,4 ± 0,02 cm-1 NTC (10 k / 25 °C) NTC (10 k / 25 °C) Pt 1000 0...1000 µS/cm -5...+80 °C 0...200 mS/cm -5...+80 °C 0...1000 mS/cm -5...+80 °C 12 mm 12 mm 16 mm 120 mm 120 mm 145 mm ca. 1 m ca. 1 m 1 m 100 mm 100 mm 100 mm 12 month (assuming appropriate usage) Better ±0,5% of m.v. ±0,2 % FS Better ±0,5% of m.v or ±2 s/cm ±0,1 % FS or ±2 s/cm ±0.2 K 25 °C -5 ... +80 °C ((short time 100 °C) -5 ... +80 °C plug 7pol bayonet fitting (IP65) https://manual-hub.com/