One moment, please...
Homepage | ENERGY STAR
User Guide for acer models including: CB242Y, CB242Y Full HD LED Monitor, Full HD LED Monitor, HD LED Monitor, LED Monitor, Monitor
Acer CB242Y D3 Full HD LED Monitor - 16:9 - Black UM.QB2AA.301: Monitors - COLAMCO.com
Acer CB242Y D3 Full HD LED Monitor - 16:9 - Black - antonline.com
Acer CB242Y D3 Full HD LED Monitor UM.QB2AA.301 Tech-America
File Info : application/pdf, 35 Pages, 2.32MB
DocumentDocumentAcer LCD Monitor
User Guide
English
Copyright © 2023. Acer Incorporated. All Rights Reserved. Acer LCD Monitor User Guide Original Issue: 4/2023
Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondence concerning your unit should include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.
Acer LCD Monitor User Guide
Model number: __________________________________ Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
English
Information for your safety and comfort
Safety instructions
Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.
Special notes on LCD monitors
The following are normal with the LCD monitor and do not indicate a problem. · Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn
off the power switch and then turn it on again to make sure the flicker disappears. · You may find slightly uneven brightness on the screen depending on the desktop pattern
you use. · The LCD screen has 99.99% or more effective pixels. It may include blemishes of 0.01%
or less such as a missing pixel or pixel lit all the time. · Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the power switch for a few hours.
Cleaning your monitor
Please carefully follow these guidelines when cleaning the monitor: · Always unplug the monitor before cleaning. · Use a soft cloth to wipe the screen and cabinet front and sides.
English
Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power from the equipment, be sure to unplug the power cord from the electrical outlet.
Safe listening
To protect your hearing, follow these instructions.
· Gradually increase the volume until you can hear it clearly and comfortably and without distortion.
· After setting the volume level, do not increase it after your ears have adjusted.
· Limit the amount of time listening to music at high volume.
· Avoid turning up the volume to block out noisy surroundings.
· Turn the volume down if you can't hear people speaking near you.
Warnings
· Do not use this product near water.
· Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.
· Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.
· Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
· To avoid dmage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.
· Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage internal devices.
· The adapter is only used for this monitor, do not be used for other purposes.
Using electrical power
· This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
· Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.
English
· If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
· Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.
· This product's power cord is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the power cord plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.
Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.
· Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, type SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.
Product servicing
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: · the power cord or plug is damaged, cut or frayed · liquid was spilled into the product · the product was exposed to rain or water · the product has been dropped or the case has been damaged · the product exhibits a distinct change in performance, indicating a need for service · the product does not operate normally after following the operating instructions
English
Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.
Potentially explosive environments
Switch off your device in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device near depots, storage and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders.
Additional safety information
Your device and its enhancements may contain small parts. Keep them out of the reach of small children.
IT Equipment Recycling Information
Acer is strongly committed to environmental protection and views recycling, in the form of salvaging and disposal of used equipment, as one of the company's top priorities in minimizing the burden placed on the environment. We at Acer are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products. For more information and help when recycling, please go to this website: https://www.acer-group.com/sustainability/en/our-products-environment.html Visit www.acer-group.com for further information on the features and benefits of our other products.
Recycling Information for the United States of America
Acer encourages information technology (IT) equipment owners to responsibly recycle their equipment when it is no longer needed. Acer offers programs and services to assist equipment owners with this process. For more information on recycling IT equipment, please go to: https://www.acer.com/ac/en/US/content/recycling
English
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit https://www.acer-group.com/sustainability/en/ourproducts-environment.html
LCD pixel statement
The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction.
This product has been shipped enabled for power management:
· Activate display's Sleep mode within 5 minutes of user inactivity. · Wake the monitor when it is in Active Off mode,move the mouse or press any keyboard
key.
Tips and information for comfortable use
Computer users may complain of eyestrain and headaches after prolonged use. Users are also at risk of physical injury after long hours of working in front of a computer. Long work periods, bad posture, poor work habits, stress, inadequate working conditions, personal health and other factors greatly increase the risk of physical injury.
Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis or other musculoskeletal disorders. The following symptoms may appear in the hands, wrists, arms, shoulders, neck or back:
· numbness, or a burning or tingling sensation
· aching, soreness or tenderness
· pain, swelling or throbbing
· stiffness or tightness
· coldness or weakness
If you have these symptoms, or any other recurring or persistent discomfort and/or pain related to computer use, consult a physician immediately and inform your company's health and safety department.
The following section provides tips for more comfortable computer use.
Finding your comfort zone
Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or raising your sitting height to achieve maximum comfort. Observe the following tips:
· refrain from staying too long in one fixed posture · avoid slouching forward and/or leaning backward
· stand up and walk around regularly to remove the strain on your leg muscles
English
Taking care of your vision
Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain.
Eyes · Rest your eyes frequently. · Give your eyes regular breaks by looking away from the monitor and focusing on a
istant point. · Blink frequently to keep your eyes from drying out.
Display · Keep your display clean. · Keep your head at a higher level than the top edge of the display so your eyes point
downward when looking at the middle of the display. · Adjust the display brightness and/or contrast to a comfortable level for enhanced text
readability and graphics clarity. · Eliminate glare and reflections by:
· placing your display in such a way that the side faces the window or any light source · minimizing room light by using drapes, shades or blinds · using a task light · changing the display's viewing angle · using a glare-reduction filter · using a display visor, such as a piece of cardboard extended from the display's top
front edge · Avoid adjusting your display to an awkward viewing angle. · Avoid looking at bright light sources, such as open windows, for extended periods of
time.
Developing good work habits
Develop the following work habits to make your computer use more relaxing and productive: · Take short breaks regularly and often. · Perform some stretching exercises. · Breathe fresh air as often as possible.
· Exercise regularly and maintain a healthy body.
English
Declaration of Conformity
We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221
And, Acer Italy s.r.l. Viale delle Industrie 1/A, 20044 Arese (MI), Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it
Product: Trade Name: Model Number: SKU Number:
LCD Monitor Acer CB242Y CB242Y XXXXXX ("x" = 0~9, a ~ z, A ~ Z, or blank)
We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized standards and/or other relevant standards have been applied:
EMC Directive: 2014/30/EU
EN 55032:2015+A11:2020 Class B EN 61000-3-3:2013+A1:2019
EN 55035:2017+A11:2020 EN 61000-3-2:2014 Class D
LVD Directive: 2014/35/EU EN 62368-1: 2014+A11:2017
RoHS Directive: 2011/65/EU EN IEC 63000: 2018
ErP Directive: 2009/125/EC Regulation (EU) 2019/2021;EN50564:2011;EN62087
Year to begin affixing CE marking: 2023.
_______________________________ RU Jan / Sr. Manager Acer Incorporated (New Taipei City)
Apr.30,2023 Date
English
Acer America Corporation
333 West San Carlos St., San Jose
Suite 1500 CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147
www.acer.com
Federal Communications Commission Supplier's Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The following local Manufacturer /Importer is responsible for this declaration:
Product: Model Number: SKU Number: Name of Responsible Party:
Address of Responsible Party:
Contact Person: Phone No.: Fax No.:
LCD Monitor
CB242Y
CB242Y xxxxxx ("x" = 0~9, a ~ z, or A ~ Z)
Acer America Corporation
333 West San Carlos St. Suite 1500 San Jose, CA 95110 U. S. A.
Acer Representative
254-298-4000
254-298-4147
English
ENERGY STAR® Acer's ENERGY STAR qualified products save you money by reducing energy costs and helps protect the environment without sacrificing features or performance. Acer is proud to offer our customers products with the ENERGY STAR mark.
What is ENERGY STAR? Products that are ENERGY STAR qualified use less energy and prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. Acer is committed to offer products and services worldwide that help customers save money, conserve energy and improve the quality of our environment. The more energy we can save through energy efficiency, the more we reduce greenhouse gases and the risks of climate change. More information refers to http://www.energystar.gov.
Acer ENERGY STAR qualified products: · Produce less heat and reduce cooling loads, and warmer climates. · Automatically go into "display sleep" within 5 minutes of inactivity. · Wake the monitor when it is in Active Off mode, move the mouse or
press any keyboard key. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks
------------------------------------------------------------------------------------------------------------Note: This product qualifies for ENERGY STAR in the factory default settings which can be restored by "Factory Reset" function in the OSD menu.
Changing the factory default settings or enabling other features may increase power consumption that could exceed the ENERGY STAR specified limit.
A third-party certification according to ISO 14024
Toward sustainable IT products
English
Say hello
to a more sustainable product
IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
This product is a better choice. It meets all the criteria in TCO Certified, the world's most comprehensive sustainability certification for IT products. Thank you for making a responsible product choice, that help drive progress towards a more sustainable future!
Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility. Conformity is verified by independent and approved verifiers that specialize in IT products, social responsibility or other sustainability issues. Verification is done both before and after the certificate is issued, covering the entire validity period. The process also includes ensuring that corrective actions are implemented in all cases of factory non-conformities. And last but not least, to make sure that the certification and independent verification is accurate, both TCO Certified and the verifiers are reviewed regularly.
Want to know more?
Read information about TCO Certified, full criteria documents, news and updates at tcocertified.com. On the website you'll also find our Product Finder, which presents a complete, searchable listing of certified products.
Contents
English
Information for your safety and comfort
iii
Safety instructions
iii
Special notes on LCD monitors
iii
Cleaning your monitors
iii
Accessibility
iv
Safe listening
iv
Warnings
iv
Using electrical power
iv
Product servicing
v
Potentially explosive environments
vi
Additional safety information
vi
IT Equipment Recycling Information
vi
Disposal instructions
vi
LCD pixel statement
vii
Tips and information for comfortable use
vii
Finding your comfort zone
vii
Taking care of your vision
viii
Developing good work habits
viii
Declaration of Conformity
ix
Federal Communications Commission
Declaration of Conformity
Declaration of TCO
x
Unpacking
1
Attaching the base (for selected models)
2
Screen position adjustment
3
Connecting the adapter and AC Power cord
3
Power saving
Display Data Channel (DDC)
Connector pin assignment
4
19-pin color display signal cable
4
20-pin color display signal cable
5
Standard timing table
6
Installation
7
Users controls
8
Panel controls
8
Using the Shortcut Menu
9
The Function page
10
Troubleshooting
15
VGA IN/HDMI1.4/DP Mode (Optional)
15
English
Unpacking
Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future.
LCD monitor
Quick start guide
*DP Cable (Optional)
LCD Monitor CB2 series/CB242Y
USER GUIDE
*HDMI1.4 cable (Optional)
*AC Power cord
*Audio Cable (Optional)
*VGA Cable (Optional)
*USB 2.0 cable
*Also the Replaceable parts required by the TCO Certified.
English
SCREEN POSITION ADJUSTMENT
In oder to optimize the best viewing position, you can adjust the height/tilt of the monitor.
· Height Adjustment
After pressing the top of the monitor then you can adjust the height of the monitor.
1
2
165mm
· Tilt
Please see the illustration below for an example of the tilt range. Only at the highest point can 35 degrees of recline be offered for the angle of elevation.
-5° 35°
English
· Swivel
With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle.
178o
178
· Monitor Pivot
Before rotating the display,lift it to the top position and then push it back to the utmost degree. Rotate clockwise or counter-clockwise until the monitor stops at ±90°.
35°
1
90o
90o
165
English
Connecting the AC Power cord
· Check first to make sure that the power cord you use is the correct type required for your area.
· The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area. No user-adjustment is required.
· Plug one end of the AC power cord to the Adapter, and plug the other end into an AC outlet.
· For units using 120 V AC: Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V.
· For units using 220/240 V AC: Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed.
Power saving
The monitor will be driven into "Power Saving" mode by the control signal from the display controller, as indicated by the amber-color power LED.
State ON Power Saving Mode
LED Light Blue Amber
The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from Active OFF state back to ON state is around 3 seconds.
English
Display Data Channel (DDC)
To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing. The monitor supports the DDC2B standard.
20-pin color display signal cable
PIN No. Description 1 ML_Lane 0+ 3 ML_Lane 05 GND 7 ML_Lane 2+ 9 ML_Lane 211 GND 13 KONFIG1 15 AUX CH+ 17 AUX CH19 Return
PIN No. Description 2 GND 4 ML_Lane 1+ 6 ML_Lane 18 GND 10 ML_Lane 3+ 12 ML_Lane 314 CONFIG2 16 GND 18 Hot Plug 20 DP_PWR
19-pin color display signal cable
English
PIN No. Description 1 TMDS Data2+ 3 TMDS Data25 TMDS Data1 Shield 7 TMDS Data0+ 9 TMDS Data011 TMDS Clock Shield 13 CEC 15 SCL 17 DDC/CEC Ground 19 Hot Plug Detect
PIN No. Description 2 TMDS Data2 Shield 4 TMDS Data1+ 6 TMDS Data18 TMDS Data0 Shield 10 TMDS Clock+ 12 TMDS Clock14 Reserved (N.C. on device) 16 SDA 18 +5V Power
15-pin color display signal cable
1
5
6
10
11
15
PIN No. Description 1 Red 2 Green 3 Blue 4 Monitor ground 5 DDC-return 6 R-ground 7 G-ground 8 B-ground
PIN No. Description 9 +5V 10 Logic ground 11 Monitor ground 12 DDC-serial data 13 H-sync 14 V-sync 15 DDC-serial clock
English
Standard timing table
MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
VGA MAC VESA SVGA SVGA XGA XGA VESA SXGA VESA WXGA WXGA+ WSXGA+ FHD FHD FHD
VESA MODE Resolution
640x480 640x480 720x400 800x600 800x600 1024x768 1024x768 1152x864 1280x1024 1280x720 1280x800 1440x900 1680x1050 1920x1080 1920x1080 1920x1080
60Hz 66.66Hz 70Hz 56Hz 60Hz 60Hz 70Hz 75Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 75Hz 100Hz*
* only HDMI/DP
English
Installation
1. Turn off your computer and unplug your computer's power cord. 2. Connect the signal cable to the VGA and /or HDMI1.4 (optional) and /or DP (optional) input socket of the monitor,
and the VGA and /or HDMI1.4 (optional) and /or DP (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector. 3. Connect the USB Cable(Optional) 4. Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with the audio cable. 5. Insert the monitor power cable into the power port at the back of the monitor. 6. Connect the power cord to the monitor, then to a properly grounded AC outlet.
Note: Audio output is only for audio output model. Please check user manual for more instruction. *POWER CORD specifications refer to page15 *For the installation of replaceable parts, please refer to the above installation instructions. *Users may go to the local service network to replace /purchase the qualified replaceable parts. For local service centers and service contacts, please refer to https://www.acer.com/ac/en/US/content/support
English
User Controls
1
2 3 4
5
External controls
1
Power button
2
Function key
/
3
Function key
/
4
Function key
/X
5
Function key
/
Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power saving mode.
a. Press to view Main page. Press again to enter hotkey1 function. b. When the Function Menu is active, press this key to view the basic
information for your monitor and current input or reset the custom color settings to the factory defaults.
a. Press to view Main page.Press again to enter hotkey2 function. b. When the Function Menu is active, press this button to select
select scenario mode or game mode .
a. Press to view Main page.Press again to enter Input select function.
b. When the Function Menu is active, this button will quit the OSD.
a. Press to view Main page.Press again to enter next function in the Function Menu.
b. The single toggle button on the backside of the Display bezel operates like a joystick. To move the cursor, simply toggle the button in four directions. Press the button to select desired option. Bright gray indicates operable. Dark gray indicates inoperable.
AMD FreeSync(DP/HDMI):
It can allow a AMD FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update.
English
Using the Shortcut Menu
------------------------------------------------------------------------------------------------------------Note: The following content is for general reference only. Actual product specifications may vary.
The OSD (onscreen display) can be used to adjust the settings of your LCD monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. For advanced settings, please refer to following page:
Main page
Mode Standard
Brightness 70 Input HDMI
Menu
1.
Hot Key1
Modes, Brightness, Volume, Gamma,
Contrast, Low Blue Light, Over Drive
2.
Hot Key2
Modes, Brightness, Contrast, Volume,
Gamma, Low Blue Light, Over Drive
3.
Hot Key3
Input Switch Hot Key
4.
Main Menu
Hot key1 (default: Standard mode)
To choose scenario mode(sRGB,Reading,Darkroom,User, Standard, ECO, Graphics, Movie)
Modes
sRGB
Reading
Darkroom
User
Standard
Move
ECO
OK
Graphics
Movie
Hot key2 (default: Brightness)
Open the Brightness control and select your preferred brightness setting . When you are done, press the joystick to quit current page and store.
Brightness
70
Adjust
OK
English
Selecting the input
Open the Input control and select VGA IN, HDMI1.4, DP or Auto Source. When you are done, press the joystick to exit current page and store.
Input
Input
HDMI
Auto Source
On
Move
OK
Exit
Main menu
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Picture from the OSD. The toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle the joystick to the left or right to adjust the sliding scales.
Information Hot Key
: Show Monitor Information and Reset control function.
Modes Hot Key
: To change Modes Hot Key menu.
Exit Hot Key X : To exit current page and store.
Picture
Picture Color Audio Performance OSD System
Move
Picture Color Audio Performance OSD System
Mode - Standard
Brightness Contrast Black Boost Low Blue Light ACM Super Sharpness Auto Config H.Posion
Enter
Mode - Standard V.Posion Focus Clock
70
50
5 Off
Off
Off
X
50
50 50 50
X
Move
Enter
1. Press the MENU key to open the OSD.
English
2. Toggle the joystick to the up or down to select Picture from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Low Blue Light, ACM,Super Sharpness,Auto Config,H. Position,V. Position,Focus and Clock.
5. Brightness: Adjust the brightness from 0 to 100. ----------------------------------------------------------------------------------------------------------Note: Adjusts the balance between light and dark shades.
6. Contrast: Adjust the contrast from 0 to 100. ----------------------------------------------------------------------------------------------------------Note: Sets the degree of difference between light and dark areas.
7. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the brightness without changing lighter shades.
8. Low Blue Light: The display uses the low blue light solution. Default setting (Low Blue Light=Standard, Level 1, Level 2, Level 3, Level 4).
9. ACM: Turn ACM on or off. Note: Set to "On", will be based on the current screen to dynamic contrast adjustment.
10. Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology can simulate high-resolution images by boosting the pixel density of the original source to make images sharper and clearer..
Color
Picture Color Audio
Performance OSD System
Move
Picture Color Audio
Performance OSD System
Mode - Stamdard
Gamma Color Temp.
R Gain G Gain B Gain R Bias G Bias B Bias
Enter
Mode - Stamdard
Modes sRGB Mode Grayscale Mode 6-axis Hue 6-axis Saturate
2.2 Warm
50 50 50
50 X
50 50
Off Off
X
Move
Enter
1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the
English
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Gamma mode allows you to adjust the luminance tone.The default value is 2.2 (standard value for Windows).
5. Color temperature: Default is warm. You can choose Cool, Normal, Warm, Bluelight or User.
6. Modes:To choose scenario mode.
7. sRGB: Default is off. You can turn sRGB on or off to better color match with peripheral devices, such as printers and digital cameras.
8. Grayscale Mode:To choose Grayscale mode.
9. 6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue. 10. 6-axis Saturate: Adjust the red, green, blue, yellow, magenta and cyan saturation.
Audio
Picture Color Audio Performance OSD System
Mode - Stardard Volume Mute
70 Off
X
Move
Enter
1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales. 4. Volume: Adjust the volume 5. Mute:To choose mute on/off .
English
Performance
Mode - Standard
Picture Color Audio Performance OSD System
Over Drive AMD FreeSync VRB Refresh Rate Num
Normal Off Off Off
X
Move
Enter
1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to
the right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to control functions.
4. Over Drive: Select Off, Normal or Extreme. 5. AMD FreeSync:To choose AMD FreeSync on/off. 6. VRB:To choose VRB on/off. 7. Refresh rate num: Display the panel's current refresh rate on the screen.
Note: If AMD FreeSync set "On" you can see the V Frequency to changes in the OSD. OSD
Picture Color Audio Performance OSD System
Mode - Standard
Language OSD Timeout Transparency OSD Lock
English
Off Off
10
X
Move
Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Language: Set the OSD menu language. 5. OSD timeout: Adjust the delay before turning off the OSD menu. 6. Transparency: Select the transparency when using gaming mode. The transparency
English
can be 0% (OFF), 20%, 40%, 60%, or 80%. 7. OSD Lock: To choose OSD lock on/off.
Note:
OSD Locked:
· Set the OSD Lock to "On" by the OSD option and press "Enter" to execute the All Key lock function.
· The "OSD Locked" message will be displayed in the middle of the screen.
· LED lights will be changed from Low Blue Light to orange light. · Press any Key screen to prompt "OSD Locked" message. OSD Unlocked: · In normal display condition to press the "Navi Key" in the middle of more than 3
seconds to trigger "OSD Unlock".
· The "OSD Unlock" message will be displayed in the middle of the screen.
· LED lights will be restored to Low Blue Light.
System
Picture Color Audio Performance OSD System
Mode - Standard
Input Auto Source Wide Mode Hot Key Assignment DDC/CI HDMI Black Level Quick Start Mode
HDMI On Full
On
X
Normal Off
Move
Enter Quick Start Mode
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to control functions.
4. Input: Select the source from VGA IN, HDMI1.4, DP.
5. Auto Source: The default is "On", which can support auto search for signal source in order. Note: Surround application must set Auto Source is "Off".
6. Wide mode: You can select which screen aspect you are using. The options are Aspect and Full.
7. Hot Key Assigment: Select the function of shortcut key 1(Modes, Volume, Brightness, Gamma, Contrast, Low Blue Light, Over Drive) and shortcut keys 2 (Modes, Volume,
Brightness, Gamma, Contrast, Low Blue Light, Over Drive).
8. DDC/CI: Allows the monitor settings to be set through the software on the PC. ----------------------------------------------------------------------------------------------------------Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent via software.
9. HDMI Black level: Select to set HDMI1.4 black level.
10. Quick start mode: Select Off or On. Turn on to speed up boot speed.
Save Setting to...(User mode only)
Mode - User
Picture
Mode: sRGB
Color
Mode: Reading
Audio
Mode: Darkroom
Performance
OSD
System
X
Save setting to...
Move
Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select "Save Setting to..." from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Save Setting to Game mode: There are three user-defined profiles available. When you have decided what settings suit you, save them and system will be able to recall the settings in the future when you turn on gaming mode .
Troubleshooting
Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem.
VGA IN/HDMI1.4/DP Mode (Optional)
Problem No picture visible
LED status Blue
Off
Remedy
Using the OSD menu, adjust brightness and contrast to maximum or reset to their default setting.
Check the power switch.
Amber
Check if the AC power cord is properly connected to the monitor.
Check if the video signal cable is properly connected at the back of monitor.
Check if the computer system is switched on and in power saving/standby mode.
If OSD Lock is On, the LED status set Amber.
Note: Acer monitor is purposed for video and visual display of information obtained from electronic devices.
Regulatory Compliance
217186 I.T.E.
Product Information for EU Energy
English
The default OSD mode of this monitor is ECO mode. If you wish to adjust Brightness/Contrast of your monitor,please change OSD mode to Standard mode in the Picture menu. Then you can manually adjust Brightness/Contrast level. TCO certifies the Standard mode.
OSD ECO OSD TCO
OSD ECO / " " OSD / TCO
OSD ( ) ECO (). / OSD Standard () Picture (). / .
TCO.
ECO. Brightness ()/Contrast () , Standard mode ( ) Picture (). Brightness ()/Contrast (). TCO Standard mode ( ).
Cestina Dansk Deutsch
Výchozím rezimem OSD tohoto monitoru je ECO rezim. Pokud chcete nastavit jas/kontrast monitoru, zmte prosím rezim OSD na standardní rezim v nabídce Obraz. Poté rucn upravte úrove jasu/kontrastu. TCO certifikuje standardní rezim.
Skærmmenuens standardindstilling på denne skærm er Energisparingsfunktionen. Hvis du ønsker at juster skærmens lysstyrke/kontraste, skal du ændre skærmmenuen til Standard i menuen Billede. Herefter kan du justere lysstyrken/ kontrasten. TCO certificerer Standard-funktionen.
Der Standard-OSD-Modus dieses Monitors ist der Energiesparmodus. Bitte setzen Sie den OSD-Modus im Bildmenü auf Standardmodus, wenn Sie Helligkeit/ Kontrast Ihres Monitors anpassen möchten. Anschließend können Sie Helligkeit/ Kontrast manuell einstellen. TCO-zertifizierter Standardmodus.
(OSD) ECO mode ( ). / , OSD Standard mode ( ) Picture (). /. TCO Standard mode ( ).
Español
El modo OSD predeterminado de este monitor es ECO. Si desea ajustar el brillo o el contraste del monitor, cambie el modo OSD a Estándar en el menú Imagen. A continuación, puede ajustar manualmente el nivel de brillo y contraste. TCO certifica el modo Estándar.
Eesti
Monitori ekraanimenüü on valimisi reziimil ECO. Kui soovite muuta monitori
heledust/kontrasti, valige menüüs Picture OSD reziimiks Standard. Seejärel saate
heledust/kontrasti käsitsi reguleerida. TCO sertifikaat vastab reziimile Standard.
Suomi
Tämän näytön oletus-OSD-tila on ECO-tila. Jos haluat säätää näytön Kirkkautta/ Kontrastia,vaihda OSD-tila Vakiotilaksi Kuva-valikossa. Sen jälkeen voit säätää Kirkkaus-/Kontrastitasoa manuaalisesti. TCO sertifioi Vakiotilan.
Français
Le mode OSD par défaut de ce moniteur est le mode ECO. Si vous souhaitez régler la luminosité/contraste de votre moniteur, veuillez modifier le mode OSD et sélectionner le mode Standard dans le menu Image. Vous pourrez ensuite régler manuellement le niveau de luminosité/contraste. Le mode Standard est certifié TCO.
Hrvatski
Zadani OSD nacin rada ovog monitora je ECO nacin rada. Ako zelite prilagoditi svjetlinu/kontrast monitora, promijenite OSD nacin rada u izborniku Slika. Nakon toga ete moi rucno prilagoditi razinu svjetline/kontrasta. TCO daje certifikat za Standardni nacin rada.
Magyar
E monitor alapértelmezett OSD módja az ÖKO mód. Amennyiben módosítani szeretné a monitor Fényer/Kontraszt értékét, kérjük, módosítsa az OSD módját Standard (Szabványos) módra a Picture (Kép) menüben. Ezután lehetvé válik a Fényer/Kontraszt szintjének kézi módosítása. A Standard (Szabványos) mód TCO által hitelesített.
B a h a s a Mode OSD default monitor ini adalah mode ECO. Jika Anda ingin Indonesia menyesuaikan Kecerahan/Kontras monitor,
ubah mode OSD ke mode Standar di menu Gambar.
Anda dapat menyesuaikan tingkat Kecerahan/Kontras secara
manual. TCO menjamin mode Standar.
Italiano
La modalità OSD predefinita di questo monitor è la modalità ECO. Se si desidera regolare Luminosità/Contrasto del monitor, cambiare
la modalità OSD in modalità Standard nel menu Immagine. Quindi ,è possibile regolare manualmente il livello di Luminosità/Contrasto. TCO certifica la modalità Standard.
OSD / OSD TCO
Lietuviu
Esant numatytajai OSD rezimo nuostatai, sis monitorius veikia ECO (Taupymo) rezimu. Jei norite sureguliuoti monitoriaus ,,Brightness" (Sviesumo) / ,,Contrast" (Kontrasto) nuostatas, pakeiskite OSD rezim, ,,Picture" (Vaizdo) meniu pasirinkdami ,,Standard" (Standartin) rezim. Tuomet galsite patys nustatyti ,,Brightness" (Sviesumo) / ,,Contrast" (Kontrasto) lyg. TCO sertifikuotas rezimas yra ,,Standard" (Standartinis) rezimas.
Latviski
S monitora noklusjuma OSD rezms ir EKO rezms. Ja vlaties pielgot monitora spilgtumu/kontrastu, mainiet OSD rezmu uz standarta rezmu izvln Picture (Attls). Pc tam varat manuli pielgot spilgtuma/kontrasta lmeni. TCO sertific standarta rezmu.
Nederlands
De standaard OSD-modus van deze monitor is ECO-modus. Als u de helderheid/het contrast van uw monitor wilt aanpassen, wijzigt u de OSD-modus naar standaard modus in het menu Foto. Vervolgens kunt u het niveau voor helderheid/contrast handmatig aanpassen. TCO certificeert de standaard modus.
Norsk
Standard skjermmenymodus på denne skjermen er ØKO-modus. Hvis du vil justere lysstyrke/kontrast på skjermen,må du endre skjermmenymodus til standardmodus på Bilde-menyen. Deretter kan du justere lysstyrke og kontrast manuelt. TCO sertifiserer standardmodus.
Polski
Domylny tryb OSD tego monitora to tryb ECO. Avy wyregulowa jasno/ kontrast monitora, naley zmieni tryb OSD na tryb Standardowy w menu Obraz. Nastpnie mona rcznie wyregulowa poziom jasnoci/kontrastu. Tryb Standardowy ma certyfikat TCO.
Português
O modo de OSD predefinido deste monitor é o modo ECO. Se deseja ajustar o Brilho/Contraste do monitor, altere o modo de OSD para o modo Padrão no menu Imagem. Em seguida, poderá ajustar o nível de Brilho/Contraste. O modo Padrão é certificado pela TCO.
Român
Modul OSD prestabilit al acestui monitor este modul ECO. Dac dorii s ajustai Luminozitatea/Contrastul monitorului dvs., v rugm s comutai modul OSD la modul Standard în meniul Imagine. Apoi, putei ajusta manual nivelul de Luminozitate/Contrast. TCO certific modul Standard.
P
ECO. «/ » «» «». «/ ». .
Slovensky
Rezim ECO je v tomto monitore ako standardný rezim OSD. Ak chcete v monitore nastavi jas alebo kontrast, v ponuke Obraz zmete rezim OSD na standardný rezim. Potom môzete rucne upravi úrove jasu a kontrastu. Standardný rezim overuje TCO.
Slovenscina
Privzeti nacin zaslonskega vmesnika tega monitorja je nacin ECO. Ce zelite prilagoditi svetlost/kontrast monitorja,spremenite nacin zaslonskega vmesnika v standardni nacin v meniju »Picture« (Slika). Nato lahko rocno prilagodite raven svetlosti/kontrasta. Potrdilo za standardni nacin je izdal TCO.
Srpski
Podrazumevani rezim prikaza na ekranu ovog monitora je rezim ECO. Ako zelite da podesite osvetljenost/kontrast monitora, promenite rezim prikaza na ekranu na Standard (Standardni) u meniju Picture (Slika). Nakon toga mozete rucno da podesite nivo osvetljenosti/kontrasta. TCO sertifikuje standardni rezim.
Svenska
Standard OSD-läge för denna skärm är ECO-läge. Om du vill justera skärmens ljusstyrka/kontrast, byt OSD-läge till standardläget i bildmenyn. Då kan du manuellt justera ljusstyrka/kontrastnivå. TCO certifierar standardläget.
OSD ECO
/
OSD
/ TCO
Türkçe
Bu monitörün varsayilan OSD modu ECO modudur. Monitörünüzün Parlakliini/ Kontrastini ayarlamak istiyorsaniz, lütfen Resim menüsünde OSD modunu Standart moda getiriniz. Ardindan, Parlaklik/Kontrast seviyesini manuel olarak ayarlayabilirsiniz. TCO Standart modu onaylar.
- . / , . / . .
Português brasileiro
O modo OSD padrão deste monitor é o modo ECO. Se deseja ajustar o Brilho/ Contraste do seu monitor, mude o modo OSD para o modo Padrão no menu Imagem. Em seguida, você pode ajustar manualmente o nível de Brilho/Contraste. O TCO certifica o modo Padrão.