Instruction Manual for ATEN models including: Video Extender Rack Mount Kit, VE-RMK3U

VE-RMK 3U-1

A B - ATEN

User Instructions 1 x VE-RMK3U Frame 12 x 3U Mounting Plates 26 x Plastic Captive Screws 18 x Hexagon Head Screws 36 x Countersunk Head Screws The VE-RMK3U kit provides a mounting frame and accessories to install 12 ATEN Video Extenders in 3U of rack space. Compatible with ATEN models VE800A, VE803, VE810, VE600A, VE602, VE560, CE100, VE601,

VE-RMK 3U um w 2020-07-28 - ATEN

then screw the video extender to the mounting plate. M3X5 Countersunk. Head Screws. Plastic Captive. Screws. 5. Slide a 3U Mounting Plate with video extender attached onto a slot ...

A B

Video Extender Rack Mount Kit VE-RMK3U M3X4 Hexagon Head Screw 3. Screw the video extender's mounting bracket to the mounting plate. 4. If the video extender doesn't have a mounting

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 2 Pages, 1.99MB

Video Extender Rack Mount Kit

User Instructions

VE-RMK3U

Package Contents:

The VE-RMK3U kit provides a mounting frame and accessories to install 1 x VE-RMK3U Frame

12 ATEN Video Extenders in 3U of rack space. Compatible models VE800A, VE803, VE810, VE600A, VE602, VE560,

with ATEN CE100, VE601,

12 26 18

x x x

3U Mounting Plates Plastic Captive Screws Hexagon Head Screws

VE801, VE811, and VE901

36 x Countersunk Head Screws

Installation:

1. (A) Position the VE-RMK3U Frame on the front of the rack and align the holes in the mounting brackets with the holes in the rack, then screw the mounting brackets to the rack. Rack screws are not provided. (B) Remove the two screws to detach the center brace.

A

B

2. Place the Video Extender over the 3U Mounting Plate and bring the two pieces together so that the mounting post enters the rear hole. Next, slide the Video Extender forward to lock it in place. For video extenders without brackets, see step 4.

Video Extender Rack Mount Kit VE-RMK3U

User Instructions

3. Screw the video extender's mounting bracket to the mounting plate.
M3X4 Hexagon Head Screw

4. If the video extender doesn't have a mounting bracket, align the bottom holes and then screw the video extender to the mounting plate.

M3X5 Countersunk Head Screws
5. Slide a 3U Mounting Plate with video extender attached onto a slot in the VE-RMK3U Frame, aligning the screw holes and fitting the notches. Secure the mounting plate to the frame with two Plastic Captive Screws. Repeat the process with each video extender.

Plastic Captive Screws