Cigman CLD-100 Laser Receiver for Construction Lasers

Parts and Functions

The Cigman CLD-100 is a laser receiver designed for use with construction lasers. It helps users accurately detect laser beam levels. The device features a clear display of indicators and user-friendly controls.

Device Layout:

• Detection Window (9): A wide window at the top of the device is used to capture the laser beam. Dimensions associated with this area are approximately 30mm (1.18 inches) and 120mm (4.72 inches).
• Direction Indicators (1, 2, 3): Three indicators on the front panel show the laser beam's position: "move down" (1), center (2), and "move up" (3).
• Bubble Levels (7, 8): Integrated bubble levels assist in positioning the receiver accurately.
• Controls:
  • Power On/Off Button (5): Turns the device on and off.
  • Sound Signal Button (10): Adjusts the audio alert settings.
• Indicators:
  • Power Indicator (4): Shows the device's power status.
  • Speaker (6): Provides audible feedback.
• Battery Compartment (11): Located at the bottom, this compartment houses a 9V battery.

Operation

1. Laser Setup: Before using the detector, ensure your construction laser is set to "pulse mode".
2. Mounting and Activation: Mount the receiver securely on a wall or pole. Press the Power On/Off button (5) to activate the device. Aim the laser beam from your construction laser towards the detector's detection window (9).
   • Laser Below: If the laser beam is detected below the center, the "Move up" indicator (3) will flash and beep rapidly.
   • Laser Above: If the laser beam is detected above the center, the "Move down" indicator (1) will flash and beep slowly.
   • Laser Centered: When the laser beam is precisely aligned with the center indicator (2), the center indicator will light up, and a continuous long beep will sound, confirming the correct level.
3. Audio Feedback: Press the Sound Signal button (10) to select your preferred audio alert mode.

Specifications

• Automatic Power Off: The detector automatically powers down after 10 minutes of inactivity to conserve battery life.
• Power Source: Operates on a single 9V battery.
• Dimensions: 150 mm (Height) x 55 mm (Width) x 26 mm (Depth).
• Weight: Approximately 150 grams (including battery).