Walkbase | Personalizing in-store shopping
Instruction Manual for walkbase models including: 2AU8X-AT-2, 2AU8XAT2, AT-2, AT-2 Asset Tag, Asset Tag, Tag
SCALA Digital Technology (Ningbo) Co., LTD AT-2 Asset Tag 2AU8X-AT-2 2AU8XAT2 at 2
File Info : application/pdf, 9 Pages, 1.03MB
DocumentDocumentWalkbase AT-2 Installation manual v.1.1 08.06.2023 Copyright 2023 Stratacache Inc. www.walkbase.com Revision history Version number 1.0 1.1 Changes First release Package dimensions added Date 8 May 2023 8 June 2023 Person VK VK Copyright 2023 Stratacache Inc. www.walkbase.com Specifications HARDWARE SPECIFICATIONS Model Dimensions Weight Color IP protection class Power supply Operating frequency range Certification Working temperature Housing material Package dimensions Package weight Package contents Packed separately AT-2 99 x 48 x 16.3 mm 52g Black IP67 CR2477 Battery 2.4-2.5GHz CE, FCC, RoHS 0 - 50°C PC 28 x 27 x 13 cm 2.6 kg 50x Walkbase AT-2 Asset tag Backplates M4 Square nuts M4x14 Locking security bolts Copyright 2023 Stratacache Inc. www.walkbase.com Package dimensions Copyright 2023 Stratacache Inc. www.walkbase.com Dimensions All dimensions are in millimeters (mm). Copyright 2023 Stratacache Inc. www.walkbase.com Backplate dimensions All dimensions are in millimeters (mm). Copyright 2023 Stratacache Inc. www.walkbase.com Features Copyright 2023 Stratacache Inc. www.walkbase.com Mounting Copyright 2023 Stratacache Inc. www.walkbase.com Installation Activating the tag for the first time. 1. To activate the tag for the first time, wave a magnet over the top of the tag until an LED flashes once. 2. After the tag has been activated, the tag is ready to be configured in the Walkbase Cloud management tools. FCC Statement FCC ID:2AU8X-AT-2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions, in compliance with exposure requirements. Copyright 2023 Stratacache Inc. www.walkbase.com