ILIFE-V20 Robotic Vacuum Cleaner

Dear Customer,

Thank you for purchasing the ILIFE V20 robotic vacuum cleaner! You've joined millions of people who clean with robots – the smarter way to get it done.

Please take a few moments to read this manual and get acquainted with your robot to achieve the best performance. If you have any problems, do not hesitate to contact customer service or visit our website at www.iliferobot.com for more information.

Stay connected with us on Facebook and Twitter to enjoy exclusive benefits:

• Get support tailored to your specific robot, including answers to questions, maintenance tips, video demos, live chat, and more.
• Get product updates and other valuable information, and be among the first to find out about new robots, exclusive discounts, and special promotions.

Connect with us:

• Facebook: https://www.facebook.com/ilifeglobal
• Twitter: https://twitter.com/ilife_global

Enjoy a thorough cleaning every day!

Best regards,
ILIFE Innovation

ILIFE Customer Service

✉️ support@iliferobot.com

Safety Instruction

Warnings

1. This robot should not be used by children under 8 years old or people with mentally challenged, unless they are under supervision. Do not let children sit on the robot or use it as a toy.
2. Attend to the robot promptly if an error occurs during cleaning. Before using the robot, remove all power cords and small objects on the floor. Roll up carpet tassels and make sure curtains and table cloth are not in contact with the floor.
3. If there are hanging steps or stairs, please test if the robot can detect them before use. If not, please set up barriers to avoid falling down, and make sure that the barriers cause no harm to people.
4. Follow the instructions in this user manual. Use factory authorized or recommended accessories only.
5. Make sure the voltage of the charging dock is compatible with the voltage of the power supply.
6. Use the robot indoors and in a home environment only. Do not use it outdoors, or in commercial or industrial spaces.
7. Use factory authorized adapter and charging dock only. Do not use non-rechargeable battery. Refer to "Product Specifications" section for details about battery standards.
8. Do not soak the robot in water and do not rinse the robot under the faucet.
9. Do not clean the robot with a dripping wet cloth.
10. Do not use the robot on floors with ponding water.
11. Do not use the robot near fire or fragile objects.
12. Do not allow the cloth, human hair, fingers, or other parts of the body to get close to the open or running mechanism of the robot.
13. Do not use the robot on floors with stones or paper to avoid being stuck.
14. Do not use the robot in areas with any flammables, such as gasoline, toner, and so on. Or use the robot to clean any burning objects, like cigarettes, ashes, or matches, or anything that may cause a fire.
15. Do not use a damaged charging dock.
16. Do not lift up the robot or the charging dock by the power cord, and keep the power cords away from heat and avoid them being trapped around doors, sharp edges, or corners.
17. Damaged power cords must be repaired by the manufacturer's repair service or certified technicians.
18. Install dustbin and filters properly before using the robot.
19. Do not use the robot in rooms where babies are sleeping.
20. Do not use damaged power cords or charging dock to recharge the robot. Do not use the robot if it's damaged by falling down or soaking in water.
21. Turn off the power switch if the robot will not be used for a long time.
22. Turn off the power switch before cleaning or maintaining the robot.
23. Unplug power cords from the charging dock before cleaning or maintaining the robot.
24. Remove the battery before discarding the robot.
25. Robot and battery are to be disposed of according to local safety regulations.
26. Do not cremate the robot to avoid explosion.
27. Follow the instructions in this user manual. The manufacturer is not responsible for any damages caused by improper use.

Product Composition

List of accessories

• Main Body
• Charging Dock
• 2-in-1 Dustbin and Water Tank
• Duster Component
• Mop Cloth
• Remote Control
• Cleaning Tool
• Extra Side Brush
• User Manual
• Power Adapter
• Filter

Host introduction

Point laser sensors

Power on/off/clean/pause ⏻:

• Short press to start cleaning/pausing.
• Long press 3 seconds to power on/off.

Recharge/pause ⌂:

• Short press to recharge/pause.

Light:

• White light: Normal operation/recharging
• Red light: Abnormal status

Sensor and structure

Cliff sensors

• Universal wheel
• Side brush
• Battery cover
• Left/Right wheel
• Rolling brush
• 2 in 1 Dustbin & water tank

Charging dock

Charging pins

Signal transmitting area

Cable slot

Remote Control

• Auto charge button ⌂
• Direction buttons
• Path mode ⊜
• Start/Pause ⏻
• Adjustable suction ?
• Edge mode ➡️
• Spot mode ?

Button Instructions

1. Clean/Pause button ⏻:
   • Press the button to switch the robot from sleep mode to idle mode.
   • Press the button when in idle mode to start cleaning.
   • Press the button to pause the robot during its operation.
2. Direction buttons:
   • A. "⬆️ Forward": Press the button to move the robot forward.
   • B. "? Adjustable suction": Press the button to switch suction in working mode.
   • C. "< ⬅️ Left": Press the button and the robot will turn left.
   • D. "➡️ Right": Press the button and the robot will turn right.

   ? Note: "⬆️" cannot be used during a cleaning cycle.

3. Auto charge button ⌂: Press the button and the robot will return to the charging dock for recharging.
4. Edge cleaning button ➡️: Press the button to start border cleaning.
5. Spot mode button ?: Press the button to start the spot cleaning.
6. Path mode ⊜: Press the button to start cleaning under path mode.
7. MAX mode ?: During the cleaning process, if there is a lot of dust, press this button to increase the suction power of the robot. Press it again to switch to the max suction power, press it again to switch to the mute mode suction, and press it again to switch back to auto mode suction.

? Note: Please install two AAA/R03 batteries before using the remote control. Please take out the batteries if the remote control won't be used for a long time.

Product Operation

Precautions

Before starting the vacuum cleaner, clean up wires and sundries scattered on the ground, and remove easy-to-fall, fragile, valuable, and potentially dangerous items. Avoid being entangled, stuck, dragged, or knocked down by the main unit; otherwise, personal injury or property damage may be caused.

When used in a suspended circumstance, it shall be protected by rails to avoid accidental falling or pushing other articles from falling; otherwise, personal or property damage may be caused.

Charging

1. Connect the power cord: Wrap the excess wire around the spool and plug it in.
2. Place the charging dock: Place the charging dock against a wall, and connect the power supply. Ensure a space of at least 0.5m on both the left and right sides of the charging dock, and a space of at least 1.5m in front of it. Do not expose the charging dock to direct sunlight.
3. Power on and charge: Press and hold the ⏻ button to turn on. Wait for the indicator to be always on, then lean the host against the charging dock to charge. The language prompt "charging" indicates that charging has started.

? Note: If the battery is insufficient and cannot be turned on, please put the main unit on the charging dock, and the device will automatically power on.

Power on/off

• Press and hold the ⏻ button for 3 seconds; the indicator light will light up, and the power on will be successful.
• When the machine is standby, press and hold the ⏻ button for 3 seconds; the indicator light will be off, and the machine will be turned off.

? Note: The console cannot be powered off while it is charging.

Sweep/Pause

• After the boot is completed, short press the upper button of the main machine or the mobile App to start cleaning.

? Note:

• Robot vacuums cannot be used to sweep liquids.
• If the battery level is less than 15%, you will not be able to perform the cleaning task; please charge it before continuing cleaning.
• When the battery level is lower than 15% during cleaning, the device will automatically return to the charging dock to recharge.
• Please tidy up all kinds of wires on the ground (including the power cord of the charging dock) before cleaning to avoid power failure of electrical appliances and damage to items or wires caused by dragging the main unit during cleaning.

Charging

• Automatic mode: After cleaning, the host will automatically return to the charging dock to charge.
• Manual mode: In the pause state, short press the ⏻ button to start the recharge or use the mobile App to start the recharge.

? Note: If the main unit does not find the charging cradle, it will automatically return to the starting position. Please manually put the main unit back on the charging cradle to charge.

Automatic sweeping

After starting, the machine will first plan the cleaning path along the edge, and then plan the cleaning path in a bow-shaped filling manner, cleaning the whole house in an orderly and efficient way. The device will automatically return to the charging dock for charging after cleaning is completed (this is the default cleaning mode of the machine).

Area of completion

Area to be cleaned

Suction adjustment

Using the mobile App, you can choose Silent, Standard, Powerful, Max (MAX).

Make an appointment for cleaning

The mobile App can be used to set a scheduled cleaning time. The console will automatically start cleaning at the specified time.

App Download

1. Install the App: Scan the QR code or search "ILIFE Clean" in the mobile App store to download the App.
2. Register and log in to the App.
3. Wi-Fi Reset: At the same time, long press ⏻ and ⌂ for 3 seconds. You will hear the voice prompt "WiFi has been reset". The white lights of the power button will flash, and the robot will enter the waiting state for connection. After the connection is completed, the white lights of the power button will be steady on.
4. Add a device: Click "Add a device" or "+" in the top right corner.

Connecting via Bluetooth

Enable Bluetooth on Your Phone: To connect via Bluetooth, please ensure that Bluetooth is enabled on your phone.

Pairing Process: Go to phone settings and enable Bluetooth. Back to the App, and the device will pop up on the top. Click Add > Select home 2.4GHz Wi-Fi and enter the password > Download and finish.

AP Mode

• Select your device model.
• Select a 2.4GHz Wi-Fi network and enter the password.
• Go to your phone's settings and select the robot's hotspot starting with "SmartLife", and after connecting successfully, return to the App.
• Connecting device is processing. Please wait until finished.

Connect with Amazon Alexa or Google Assistant

1. The robot vacuum cleaner connects to the App first. Click "Me" in the bottom right corner.
2. Click "Alexa" or "Google Assistant" to enter the operation interface.

Routine Maintenance

Main brush (weekly cleaning recommended)

1. Flip the machine and hold down the buckle on the main brush cover, then take out the main brush.
2. Remove the main brush.
3. Use the matching cleaning brush to sweep away the dust in the main brush and the main brush cavity, and then clean up any tangles on the main brush.

Edge brush (weekly cleaning recommended)

1. Flip the machine and use a Phillips screwdriver to screw out the side brush screws and pull out the side brush.
2. Clean the tangled hairs and dirt, put it back on, and tighten the screws.

? Note: It is recommended to replace the side brush every 3 months to ensure the cleaning effect.

Dustbin and filters (recommended after each cleaning)

1. From the back of the machine, press and hold the dustbin release button and take out the dustbin.
2. Press and hold the dustbin switch to open the dustbin and dump the garbage.

Clean the dustbin (recommended to clean once a week)

1. After a long period of use, remove the filter screen and HEPA filter.
2. Put the removed primary filter screen and dustbin under the faucet to rinse (HEPA filter screen cannot be washed).
3. Dry the water droplets after cleaning, dry the filter screen and dustbin, and wait until it is completely dry before use.

HEPA Strainer

Filter sponge

Primary stent

? Note:

• Please rinse with clean water and do not add any detergent.
• Do not use brushes or fingers to clean the filter.
• Allow the strainer to dry thoroughly for at least 24 hours.
• It is recommended to replace one set of filters every 3 months.

Water tank use

Do not use the mopping function on the carpet. After mopping the floor, please empty the water tank and remove the rag in time.

1. Add water
2. Install the tank assembly
3. Install the rag
4. Start mopping

Other spare parts

1. Cleaning spot laser detection sensor (monthly cleaning recommended)
2. Clean the main unit charging contacts (recommended to clean once a month)
3. Cleanup cliff sensor (monthly cleaning is recommended)
4. Clean the charging contacts of the charging dock (recommended to clean once a month)
5. Clean the signal emission area of the charging dock (recommended to clean it once a month)

Maintenance of the battery

1. The device has a built-in rechargeable lithium battery pack. To maintain battery performance, please keep the host in a charged state for daily use, which is conducive to the best performance of the battery and does not consume excessive power.
2. If you are not using it for a long time, please fully charge it and make sure to turn it off before storing.

Normal questions

Product Specification

Main unit

Charging dock