User Manual for JBL models including: INFBC4, 2A2K9-INFBC4, 2A2K9INFBC4, Infinity INF-BC4, Bluetooth Controller, Infinity INF-BC4 Bluetooth Controller

INFBC4 MANUAL 带FCC描述

user manual

PROSPEC ELECTRONICS of SC, Inc. INFBC4 Bluetooth controller 2A2K9-INFBC4 2A2K9INFBC4 infbc4

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 2 Pages, 851.09KB

Document Document

INF-BC4 OPERATION

4

PUSH

PWR

1

2

3

VOL

1. POWER ON/OFF button, VOL knob - Press the knob to power the controller on or off. - Turn right and left to adjust volume level. (Remark: A beep tone indicates volume has reached maximum or minimum level.) To establish Bluetooth connection - Once the controller has been powered on, it will blink red and blue until a Bluetooth connection has been made. - Go to your digital media to turn Bluetooth on and then search for the INFBC4 address. Once paired, the controller will turn to a constant blue.
2. Track DN button - Press it to select the previous track.
3. Track UP button - Press it to select the next track.
4. Play/Pause button - Simply press it to pause the playback. - Simply press it again to resume playback. To Disconnect Bluetooth device - Press and hold the PAUSE button for 3 seconds to disconnect from Bluetooth. The controller will flash red and blue when disconnected. - After Bluetooth has been disconnected, press PAUSE button to reconnect the last paired device.
Cables configuration: 1. Red: +12V power supply with 2A fuse. 2. Black: GND. 3. Blue: REM OUT with constant 12V power supply. 4. White/Blue: REM IN for external remote control. With external remote control
connected to REM IN, the BT Controller can also be powered on/off by that external remote control.) 5. Black: RCA Output.

The distance between user and products should be no less than 20cm