Welcome to Legrand - Legrand
Legrand - Spécialiste des infrastructures électriques et numériques du bâtiment
Welcome to Legrand - Legrand
Legrand E-catalog International | Electrical Ranges of products & Connected Solutions
User Manual for legrand models including: 412015 CX3 With Netatmo Starter Pack, 412015, CX3 With Netatmo Starter Pack, With Netatmo Starter Pack, Netatmo Starter Pack, Starter Pack
CX3 with Netatmo Starter Pack : Module Control Smart Contactor | 412015 | 3414971795624 | Legrand
Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod,. Apple TV, or iPad set up as a home hub. It is recommended ...
File Info : application/pdf, 8 Pages, 3.14MB
DocumentDocumentConnected starter pack: Gateway module + contactor 4 121 91 Composition of this pack This pack allows you to create a connected installation in your home. 83 mm 45 mm Gateway module EN 60669-2-1 C1 ON/OFF AUTO UPF consumption -5°C +45°C 100-240V~ 50/60Hz 2W MAX 2,4 à 2,4835Ghz <100 mW Control wiring C2 L authorized MCB Self-protected line OUT 84.5 mm 17.8 mm Connected Contactor F 11 2 oooooooooooooooo 3 oooooooooooooooo 4ooo5ooo6ooooooooooooooooooo 1 1 2 oooooooooooooooo 2 3 oooooooooooooooo 3 4oo5ooooooooo 4 ooo6ooooooooooo 5 oooo7ooooooo 8 6 ooooooo9oooooooo 7 oooooooo10 8 ooooooooo1o1ooo 12 9 oooooo 13 10 ooooooooooooo1o4 11 ooooooooooo 15 16 12 oooooooooooooooo17 13 oooooooooooooo 18 14 ooooooooooo 19 20 15 oooooooooooooo 16 oooooooooooo 17 ooooooooooooooo 21 22 23 24 oooooooo7ooo8ooo9oooooooooooo 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 18 oooooooooooooo 19 ooooooooooo 20 oooooooooooooooo 25 26 27 28 21 oooooooooooooo 29 22 ooooooooooo 30 23 oooooooooooooo 24 oooooooooooooooo 25 ooooooooooo 26 oooooooooooooooo 27 oooooooooooooo 28 ooooooooooo 29 oooooooooooooo 30 oooooooooooo Mar Feb Jan kWh Load C1 C2 C1 C2 N L LED FLUO 2,4 à 2,4835Ghz <100 mW Silent < 10dB Planning Measure 4800W 2400VA EV plug remote 3840W 650W 3000W Shedding U I kWh -5°C +45°C 100-240V~ 50/60Hz 20A MAX Connected shedding compatible Imperative security precaution The instructions for installation and use must be strictly observed in order to avoid the risk of electric shock or fire. LE12074AD Your products are compatible with technology Apple HomeKit for control of your connected home. This allows you, for example, to control your products by voice through the wizard Siri voice from your iPhone, iPad, HomePod or Apple Watch. Unique code of installation Apple HomeKit to keep Apple HomeKit: During the installation of the iOS mobile app, you will be asked for this code. HomeKit (using the House application) To control this HomeKit-enabled accessory, the latest version of iOS or iPadOS is recommended. Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod, Apple TV, or iPad set up as a home hub. It is recommended that you update to the latest software and operating system. Legal notice Using products with the Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to the iPod, iPhone or iPad, and has been certified by the developer to meet Apple's performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that using this accessory with the iPod, iPhone, or iPad may affect wireless performance. iPhone, iPod and iPad are registered trademarks of Apple Inc., registered in the US and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. HomeKit and iPadOS are trademarks of Apple Inc. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under licence. Android, Google Play and Google Play badge are trademarks of Google LLC. www.legrand.fr/reference/412191 LEGRAND - Pro and Consumer Service - BP 30076 87002 LIMOGES CEDEX FRANCE · www.legrand.com 2 Installation step by step 1 Choose a location for the Gateway module, in the electrical cabinet : C20 C16 C16 C10 C10 C16 C20 C32 WIFI OK If an internet box is present in the house, check with a smartphone that the Wifi signal level is sufficient. If the signal is not enough, try to bring the internet box to the electrical panel or add a WiFi repeater at the installation. 2 Install the Gateway module in the electrical cabinet OFF Turn OFF the power at general circuit breaker Cable the Gateway module under a circuit breaker 4 121 81 9mm 3.5 mm MAX 2x 2.5mm² 0.5Nm 3 3 Add the contactor to your connected installation OFF Turn off the power at general circuit breaker C1, C2: MAX 9mm 2x 1.5mm² 2.5mm² N, L, Load: MAX 2x 2.5mm² 6mm² C1,C2, N, L, Load: PZ1 4 mm MIN : 0.8Nm MAX : 1.4Nm Wiring examples Thanks to its control circuit with integrated power and protection, you no longer need to install a circuit breaker 2A to protect the control circuit if you wire a contact between C1 and C2. For the protection of the Connected Contactor, it is recommended to use a circuit breaker or a gG fuse with current rating 20A. controled by the energy supplier electric meter Swimming pool pump and anothers motors EV plug remote 2A C1 C2 20AX : I ON : AUTO : O OFF Load N L 2A C1 C2 20AX : I ON : AUTO : O OFF Load N L 2A C1 C2 20AX : I ON : AUTO : O OFF Load N L 4 121 71 4 121 71 4 121 71 Control of heaters through an installed central remote Control of a power single line contactor by a connected contactor * Control of a power three lines contactor by a connected contactor * 2A C1 C2 20AX : I ON : AUTO : O OFF Load N L L C1 C2 20AX : I ON : AUTO : O OFF Load N L C1 C2 20AX : I ON : AUTO : O OFF Load N L 4 121 71 4 121 71 4 121 71 *: Non-functional consumption measurement when controlling a single line or a three lines power contactor by a connected contactor. N (neutral) = blue L (Line) = Everything but blue and green/yellow Line after contact = usually purple, orange... 4 4 Complete your connected installation with additional products (not included in this pack): Modules for the electrical cabinet Sockets, switches and micromodules Accessories and wireless push buttons Wire wired products using the individual instructions provided in the packaging of each of them. The Legrand ecosystem is growing regularly, do not hesitate to consult the website legrand.com to keep you informed. 5 5 Configure the Gateway module and the Contactor OFF ON Turn off the power at Turn on the power at the general circuit breaker general circuit breaker* once the installation completed and controlled** * In order to restart all connected products at the same time. **: After wiring the installation, refit the front plate so that no active live part is accessible. 6 Finalize the installation in the Legrand Home + Control app Download the Home + Control App and follow the instructions for adding the connected product in your setup. You also have the option of controlling your installation via a voice assistant. and can customize your scenarios via the Home + Control App. 6 Reset a Connected Contactor to remove it from a connected installation Press the configuration button of the Connected Contactor (> 5 seconds) until the configuration indicator lights up in fixed red. It is no longer associated with the gateway present in the installation. >5s Use by manual control and status LED Automatic Mode OFF AUTO OFF AUTO ON ON ON/OFF Mode OFF ON 7 To add this connected product and peripheral items in your connected installation, you must follow the instructions: - with Legrand Home + Control app (Parameters/Add new product) - or consult the guides and instructions sheets on legrand.fr www.legrand.fr/reference/412191 LEGRAND - Pro and Consumer Service - BP 30076 87002 LIMOGES CEDEX FRANCE · www.legrand.com UE SIMPLIFIED DECLARATION OF CONFORMITY The undersigned, Legrand declares that the radio equipment listed on this instruction sheet are compliant to the directive 2014/53/UE. The full text of the UE declaration of conformity is available at the following website: www.legrandoc.com 8