User Manual for Power Technologies models including: PT-36, PT-36 Bay Cycle Charging Cart, Bay Cycle Charging Cart, Cycle Charging Cart, Charging Cart, Cart

Power Technologies LITE Series PT-36 Power Technologies CRT-LTE-B36L-E user manual (3.9 MB)

CRT-LTE-B36L-E

36 BAY CYCLE CHARGING CART USER MANUAL


File Info : application/pdf, 14 Pages, 3.95MB

PDF preview unavailable. Download the PDF instead.

PT 36 User Manual April 2024
PT-36
36 BAY CYCLE CHARGING CART USER MANUAL

Product Information

Designed to charge, store and transport up to 36 Chromebooks, laptops or tablets up to 14 inches.

Specifications:

Model

PT-36

Cart Dimensions

Inch mm

Shelf Dimensions
Product weight
(Without Devices)
Shipping Weight

Inch mm

Capacity

Supported Devices
Power Specifications
(For carts sold within North America)
Power Specifications (For carts sold outside North America)
Charging Type

Security

Casters

Work Platform Loading

Shelf Loading (ea.)

Adapter Shelves Loading (ea.)

Working Temperature

Working RH%

Storage Temperature

Storage RH%

Warranty

42.8 (H) x 25 (W) x 24.3 (D) 1087 (H) x 635 (W) x 617 (D) 24.25 (W) x 44.88 (H) & Divider Spacing: 1.18 615.95 (W) x 1139.9 (H) x Divider Spacing: 29.9 160 lbs (72.57 kg) 167 lbs (75.75 kg) 36 bays (3 shelves, 10 bays/shelf) Devices up to 15.6 Inch AC IN/ Power Strip: 110V AC, 50/60Hz, 10A Maximum power: 1400W AC IN/ Power Strip: 100-240V AC, 50/60Hz, 10A Maximum power: 2400W Intelli-Sense Smart Charging Cart Front door 3 point mechanism with lock hole Four 4 inch (102 mm) Casters; 2-Locking, 2- Directional 55.1 lbs (25 kg) 110.2 lbs (50 kg) 6.6 lbs (3 kg) 0°- 30°c 10% - 90% -40°- 60°C Temp 5% - 95% Lifetime Frame, 2 Years Components, 2 Year Electronics

Specifications subject to change without notice.

42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

2

Product Information

This manual covers the following models and part numbers. The manual is based upon the North American 110V product offering. Refer to the part numbers below and cord end diagrams for your specific region.

MODEL# PT-36

SKU CRT-LTE-B36L-D CRT-LTE-B36L-E CRT-LTE-B36L-U CRT-LTE-B36L-A CRT-LTE-B36L-S

DESCRIPTION PT-36, 36 Bay, Smart Charging Cart - 110V NA PT-36, 36 Bay, Smart Charging Cart - 220V EU PT-36, 36 Bay, Smart Charging Cart - 220V UK PT-36, 36 Bay, Smart Charging Cart - 220V AU PT-36, 36 Bay, Smart Charging Cart - 220V SW

Power Cords and Sockets for Specific Region: US / Canada

Socket
United Kingdom

Power Cord Plug

Socket
European

Power Cord Plug

Socket
Australian

Power Cord Plug

Socket
Switzerland Type-J

Power Cord Plug

Socket

Power Cord Plug

42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

3

Product Information
The PT-36 is designed to charge and store up to 36 Chromebooks, Laptops or tablets. NOTE: Please review this guide before installing devices and to learn how to safely use your cart.

Push Handle

Keyed Door Lock Latch

4" Swivel / Directional Casters

4" Swivel / Lock Casters

Front View of Cart

42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

4

Product Information
· If the device (Laptop / Chromebook) thickness is more than the gap between the dividers, remove one of the dividers to create enough space for your device.

External Power Button

Removable Dividers

Front View of Cart
42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

5

Product Information
· Removable adapter baskets are used to hold the device accessories, power adapter and allow power cables.
Removable Adapter Basket

Device Cord Pass Thru
Power Cable (left side)

Power Outlet Strips
INTELLI-SENSE Smart Charger

Rear View of Cart
42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

6

Installation Instructions
INSTALLING THE HANDLE:
· Locate the narrow cardboard box containing the handle rod, handle bolts, mounting brackets & hex wrenches.

Handle Bolts

· On top of the cart, locate the threaded holes for the handle.

· Using the larger hex wrench, attach and tighten both the left and right side handle mounting bracket to the top of the cart using 4 large bolts.

· Fit the handle rod between the bracket and tighten using the smaller hex wrench and handle bolts.

42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

7

Installation Instructions
SETTING UP DEVICES (FRONT):

Step-1: Using a ruler, measure the thickness of your device.

Step-2: If device is thicker than 1", locate & remove thumbscrews on shelf.

Step-3: Remove Retaining Strip.

Step-4: Pull forward, then up, to remove the Divider.

Step-5: Adjust spacing as needed.

Step-6: Place Retaining Strip in position & replace thumbscrews.

42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

8

Installation Instructions
SETTING UP DEVICES (BACK) :

Step-1: Remove basket by pulling upward first, then pull forward.

Step-2: If your device power adapters are "brick" style, feed power cables through holes
and place no more than 6 into a basket.

Step-3: Hook basket(s) in place & distribute power cords so that all power strips have an
equal number of devices plugged in.

Step-4: Feed device cables into pass-thru slots to front of cart.
Cable Clips Installation

Step-5: Working up front, weave device cables into divider tabs.

Step-6: Use the supplied Cable Clips to fasten each cable to the divider by pressing
down firmly, securing the cable in place.

42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

9

Intelli-Sense Smart Charging

THE ELECTRICAL SYSTEM IS DESIGNED TO HANDLE A MAXIMUM OF 14 AMPS.

External Cable Port

LED Indicators

Auxiliary Outlets

Power Input Mode Selection Internal Power Cycle Outlets "A" Cycle Outlets "B"

Switch

Button

Quick Start Tips:
· Plug in device adapters so there are an equal number of devices in Group A and Group B.
· Make sure the Mode Selection Switch is set to "SMART" mode.
· Plug in cart. The Intelli-Sense timer will automatically sense the charging needs of the cart and start charging in the most efficient and quickest method.

Group Outlets "A" 7 Amp load ON 5 Amp load OFF 5 Amp load ON 4.5 Amp load ON

Group Outlets "B" 5.5 Amp load OFF 5.5 Amp load ON 4.5 Amp load OFF 4.5 Amp load ON

Within 5 seconds of plugging in your cart's power cord, your INTELLI-SENSE Smart Charging System will initiate an test of your devices charging level requirements. Devices which are plugged into power strips that draw the most power will take priority and can take up to 2 hours before switching to the next set of outlets. Once devices are fully charged, the system will remain in a trickle charging state, maintaining your devices battery levels.
With Mode Selection Switch set to SMART:
Group Outlets "A" and Group Outlets "B" power on for 8 seconds in sequence then enter the following modes depending on current draw. If the total current draw is greater than 9A: The group outlets with the highest current draw will power on, while the group with less current draw remains OFF. Once the current draw difference is within 0.5A, the system will switch to the other group. When the total current is less than 9A, all outlets will power on at the same time. If the total current draw is less than 9A: Group "A" and Group "B" power on at the same time.The total output is continuously monitored in case a new device is added.

NOTE: If wattage exceeds 14 Amps or about 1400 Watts at one time, the charging system may not operate correctly.
Review your device's AC Adapter wattage, multiplying it by 18.

65 Watts x 18 Devices

1170 Watts

75 Watts x 18 Devices

1350 Watts

85 Watts x 18 Devices

1950 Watts

42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

10

Casters Positions
This cart is equipped with Casters that have an "Blue" color foot pedal. Engage the Directional Locking Casters by pressing the blue foot pedal down. Your cart will now easily track in a straight line. Release the Direction Lock by lifting up on the foot pedal. The cart will have its full swivel motion restored.

"Engage the "BLACK" foot pedal to securely lock the wheels, keeping the cart safely in place."

"Engage the "BLUE" foot pedal for a seamless and precise straight-line movement, making navigation a breeze."

"With a simple release of the "BLACK" foot pedal, allowing you to navigate effortless with unparalleled flexibility.

"With a simple release of the "BLUE" foot pedal, embrace a world of precision and grace in your swivel motion, making maneuvering a breeze."

42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

11

Safety Instructions

Caution Notice
DO NOT Pull the cart using power cord

THIS IS NOT A TOY. ALWAYS FOLLOW SAFETY INSTRUCTIONS.
Important

Danger Warning
Don't connect the cart with broken electrical components.

THE ELECTRICAL SYSTEM IS DESIGNED TO HANDLE A MAXIMUM OF 1400 WATTS per side. If wattage exceeds 1400W at one time, charging system may not operate correctly. Remove devices until the total wattage is under 1400W.

DO NOT place liquids on or near the cart
DO NOT attempt to move down stairs.

· ALWAYS move the cart slowly and be aware of your surroundings
· ALWAYS latch doors before moving the cart · Repairs should always be performed by a qualified
electrician. · Set the power switch to the OFF position before
you unplug the unit from the wall, plug the unit into the wall, or plug in devices. · If external devices are set on top of the cart, remove them before rolling cart around. · DO NOT block the ventilation holes used for air circulation.
For warranty claims, please have the following information ready, then visit
www.powertechnologies.com to create a help ticket.

DO NOT touch any part of the electrical system while plugged in.
DO NOT use an extension cord with this unit.

DO NOT Roll the cart over the power cord

Serial Number:
-----------------------------------------------------------Charging System Type:

DO NOT allow children to move or climb.

-----------------------------------------------------------Date Of Purchase:

DO NOT ride or run with the cart.

-----------------------------------------------------------Reseller Name:
-----------------------------------------------------------PO Number:

ONLY ADULTS should move the cart.

------------------------------------------------------------

42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

12

Troubleshooting

Trouble

Indication

Possible Cause

How to check

External LED Button is flashing green and devices are not charging

Overload Protection Mode has been activated

Wattage exceeded 1400 Watts at one time

Multiply your device's AC adapter wattage by 15.

System does External LED Power

not power on Button does cord is not

not flash

secured

properly

Few /All Devices do not get charged works

No visible indication

Power cord failure

External Power Button not works

External LED Power Strip Button does failure not flash

· Check the main Power Cord into the Power Input port located on the left side of the Charging System if it is secured properly.
· Plug the cart into a wall outlet and press the internal Power Button labeled PWR directly on the Charging System.
· Remove power cord and plug in a PC monitor style IEC Power Cord.
· Open the rear panel door and locate the 3 vertically mounted Power Strips.
· Verify each switch is in the "RESET" position, not the "OFF" position.
· Using an extension cord, test each Power Strip by unplugging each cord from the charging system and plugging them into the extension cord.
· With your cart plugged in, open the rear panel door and press the internal Power Button labeled PWR on the charging system.
· Plug the External Cable back in and press the External Power Button.

Where to check
100 Watts X
18 Devices` 1800

Remedy
Reduce the number of devices if necessary and resume charging If one or more Power Strips no longer works, replace as needed
Replace the power cord if found faulty
· If your cart powers on, unplug the External Cable from Charging System
· Using a small flat head screwdriver, ensure all individual wires are secure.
· Replace the · power button
if found faulty.

42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

13

Further Information
For further information on this product and others, contact Power Technologies at.
Power Technologies 42035 Zevo Dr Temecula, CA 92590+ 888.650.4488
support@powertechnologies.com www.powertechnologies.com

42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-36 Manual_Rev2024-04

14



References

Adobe PDF Library 17.0 Adobe InDesign 19.3 (Macintosh)