Linortek Master-Slave Device Setup Instructions: Connect and Control Remote Relays

This document provides essential guidance for configuring Linortek web relay controllers to establish a Master-Slave system. It outlines the necessary steps to enable remote signal delivery from a master controller to multiple slave controllers across various locations.

Key Configuration Steps

Remote Device Setup: Learn how to link slave controllers to the master controller by configuring IP addresses, ensuring reliable communication. The guide emphasizes using static IPs for stability.
Relay Linking: Discover how to use the master controller's relays to trigger corresponding relays on slave controllers. This section details setting relay types and location IDs for synchronized operation.
Digital Input Control: Understand how to integrate digital sensors or push switches with the master controller's digital inputs to activate relays on both master and slave devices.

By following these instructions, users can build robust Master-Slave systems for efficient remote control and monitoring.

For more information on Linortek's industrial automation solutions, visit Linortek.com.

	Linortek Ultra 300 User Manual: Ethernet I/O Controller and Run-Time Meter A comprehensive user manual for the Linortek Ultra 300 Ethernet I/O Controller, detailing setup, wiring, software configuration, advanced features like MQTT and API access, and system management. Covers digital and analog inputs, relay controls, hour metering, and scheduling.
	Using External Triggers for Emergency Sounds on Netbell-NTG This document provides instructions for using external triggers, including local and remote push buttons, to activate emergency sounds on the Netbell-NTG system. It covers configuration steps for both master-slave setups and direct local connections, along with troubleshooting and support information.
	Linortek Fargo G2 and Koda TCP/IP Web Based Relay Controller User Manual This manual provides comprehensive instructions for setting up, configuring, and operating the Linortek Fargo G2 and Koda TCP/IP Web Based Relay Controllers. It covers hardware connections, network configuration, accessing the web interface, managing relays and inputs, setting schedules, logging events, user management, and email notifications.
	Netbell-NTG User Manual - Linortek User manual for the Linortek Netbell-NTG Networked Tone/Message Generator/Controller, covering installation, software configuration, scheduling, and custom sound creation.
	Linortek Netbell-Ultra 300 Quick Setting Guide This guide provides step-by-step instructions for setting up the Linortek Netbell-Ultra 300, including IP address discovery, network configuration, bell scheduling, and standalone operation.
	Linortek Netbell Quick Setting Instructions A comprehensive guide to setting up and configuring Linortek Netbell devices, covering network connection, IP address discovery, relay control, time synchronization, and bell scheduling. Includes instructions for models like Netbell-2 and Netbell-KL.
	Netbell User Manual - Linortek Comprehensive user manual for Linortek Netbell devices, covering setup, wiring, configuration, and operation of Netbell-2, Netbell-8, Netbell-K, and Netbell-KMB variants.
	Linortek iTrixx-Ultra 300 Ethernet Hour Meter: Quick Setup Guide This guide provides quick setup instructions for the Linortek iTrixx-Ultra 300 Ethernet Hour Meter, covering installation, configuration, triggering methods, network setup, and monitoring.

Key Configuration Steps

Related Documents