USER MANUAL
Model: MO6475
Product Overview
This document is the user manual for the MOB MO6475, a wireless speaker combined with a wireless charger. It features Bluetooth connectivity and a compact design with a natural wood finish.
The product complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.momanual.com.
Manufacturer: MOB, PO BOX 644, 6710 BP (NL).
Country of Origin: Made in China.
Wireless Specifications
- Wireless Version: 5.1
- Battery Capacity: 3.7V, 2000mAh, 7.4Wh
- Charging Current: 1A
- Charging Voltage: 4.8-9V
- Charging Time: Approximately 3 hours
- Rated Impedance: 4 Ohm
- Rated Power: 3W
- Frequency Response: 280-16KHz
- Signal to Noise Ratio: Greater than 65db
Wireless Charging Specifications
- Input: DC 5V/2A, 9V/2A
- Output: 5W / 7.5W / 10W
- Receiving Distance: 2-8 MM
- Working Frequency: 100-205kHz
- Conversion Efficiency: 70%
Steps for Usage
- Connect the device with the supplied USB cable and turn on the power. The red indicator light will be constantly on, indicating the product is in wireless charging standby mode and charging the battery. The red light turns off when fully charged.
- Place the device on the wireless charger. The indicator light will turn green, signifying normal charging and that the device is in wireless charging state. The green light turns off when the device is fully charged.
Operating Instructions
Turn the power switch to the "ON" position. You will hear a start-up tone, and the blue light will flash slowly. On your device, enable the wireless function to search for the device name "MO6475" and connect. Once pairing is successful, the light will remain solid, and audio can be played from the device. To adjust playback volume, or play the previous or next song, this must be controlled via your phone.
Important Notices
- Do not use metal or magnetic phone cases; use only silicone or plastic phone cases, as these can affect the charging function.
- Do not place keys, coins, mobile phones that do not support wireless charging, or other metal objects on the wireless charger to prevent damage.
- Keep the device dry and do not use it in dusty or damp places to avoid device failure.
- Do not splash water on the device.
- Keep the equipment away from fire sources and do not ignite it.
- Do not use the device during thunderstorms to avoid equipment failure or electric shock.







