Getting Started: Unpacking and Components
This guide provides instructions for unpacking and installing your Samsung 77-inch television (models 77S95C, 77SC95). Please follow these steps carefully.
Upon opening the packaging, you will find the television screen and various accessories. Ensure all parts are present before proceeding.
Key components typically include:
- Television screen
- Stand parts (e.g., base, support)
- Screws for assembly
- Power cable
- Remote control (not explicitly shown in assembly steps but implied)
- Documentation
Step 1: Prepare for Assembly
Carefully place the television screen face down on a soft, clean surface to prevent scratches. A blanket or the protective foam from the packaging is recommended.
Diagram Description: Shows the TV screen laid flat on a protected surface.
Step 2: Assemble the TV Stand
Attach the main support pieces (labeled 'a' and 'b' in diagrams) to the back of the television screen using the provided screws (M4 x L12). The diagrams indicate specific screw types and the number of screws required (e.g., 4 screws for each part).
Diagram Description: Shows two stand parts (a, b) being attached to the rear of the TV screen using screws [tool symbol].
Step 3: Attach the Stand Base
Connect the stand base (labeled 'c') to the assembled stand parts. Secure this connection using the designated screws, as indicated in the visual instructions.
Diagram Description: Shows the stand base (c) being connected to the previously attached stand parts (a, b) and secured with screws [tool symbol].
Step 4: Secure the Stand
With the stand assembled, carefully turn the television upright. Ensure the stand is firmly attached and stable. The diagrams show securing the stand base further with additional screws.
Diagram Description: Shows the TV being positioned upright after stand assembly, with final screw attachments to the stand base using screws [tool symbol].
Step 5: Wall Mount Preparation (Optional)
If you plan to wall mount the TV, refer to the VESA mounting specifications. The diagrams show different VESA hole patterns (e.g., 400 x 400 mm) and the required screw sizes (e.g., M8 screws, 5-6 mm length) for mounting brackets. Pay attention to warning symbols [warning symbol].
Diagram Description: Illustrates VESA mounting standards and screw compatibility for wall mounting, highlighting safety warnings [warning symbol].
Step 6: Install Wall Mount Brackets
Attach the appropriate wall mount brackets to the back of the television screen using the specified screws [tool symbol]. Ensure the brackets are aligned with the VESA mounting holes.
Diagram Description: Shows wall mount brackets being screwed onto the back of the TV using screws [tool symbol].
Step 7: Mount the TV on the Wall
Securely attach the television, with its brackets, to the wall mount. Follow the instructions provided with your specific wall mount hardware.
Diagram Description: Depicts the TV being attached to a wall mount.
Step 8: Connect Cables
Connect essential cables to the appropriate ports on the TV. These typically include:
- HDMI (including eARC for audio)
- USB ports
- Optical audio out
- LAN (Ethernet) for network connectivity
Diagram Description: Shows various cables (HDMI, USB, Optical, LAN) being plugged into the TV's rear ports.
Step 9: Connect Power
Plug the power cable into the television and then into a suitable power outlet. ?
Diagram Description: Shows the power cable being connected to the TV and a wall socket.
Step 10: Final Setup and Power On
Ensure the TV is stable and all connections are secure. Turn on the television to begin the initial setup process.
Diagram Description: Shows the TV powered on, ready for initial setup.
Specifications and Dimensions
The following table provides key dimensions and weight information for the Samsung 77-inch TV models.
| Feature | 77S95C / 77SC95 | Unit |
|---|---|---|
| Screen Size (Diagonal) | 67.6 inches | (1716.6 mm / 171.66 cm) |
| Height (without stand) | 38.7 inches | (984.1 mm / 98.41 cm) |
| Depth (without stand) | 0.4 inches | (11.2 mm / 1.12 cm) |
| Width (without stand) | 76.8 inches | (195 cm) |
| Stand Width (approx.) | 41.3 inches | (1048.1 mm / 104.81 cm) |
| Stand Height (approx.) | 11.3 inches | (286.4 mm / 28.64 cm) |
| Weight (without stand) | 62.2 lbs | (28.2 kg / 28,2 kg) |
| Weight (with stand) | 88.2 lbs | (40.0 kg / 40,0 kg) |
| VESA Mounting Pattern | 400 x 400 mm | (M8 screws, 5-6 mm length) |
