User Manual for MUSE models including: Sided Solar Bollard Light, Solar Bollard Light, Bollard Light
1 2 3 4 5 6 How to install the light Step 1 : Drill 4 holes in on the surface according to the size as base dimension shows. Step 2 : Take off the base from the pillar and install it to the surface with 4 screws according to the required lighting direction. ( VERY IMPORTANT STEP) Step 3 : Screw the light head to the pillar properly. ( if the light head is separately packed .) Step 4 : Use the small screw driver to tighten the screw inside of light head to lock it tightly. Step 5 : Screw the light body to the base properly and tighten the small screw at the bottom of the pillar to avoid the loosing of light body. Step 6 : Use the allen wrench to push the button to turn on the light, then the light will work automatically from dusk to dawn. Regular Trouble Shot PROBLEM Light is off Short working time REASON Switch is off No direct sunshine Continuous cloudy or rainy days There is debris on solar panel Location problem Continuous cloudy or rainy days Battery life is expired HOW TO SOLVE Turn on the on/off switch of light Move the light to the direct sunny area Light will back to work when sun returns Clean the solar panel Move the light to the area with direct sunshine Light will be recharged when sun returns Replace with a new battery USER MANUAL of Solar Bollard Light This solar bollard light offers a futuristic design for public space outdoor lighting applications where the benefits of IK10 vandal resistance are required. LifePO4 battery combined with an intelligent lighting program provides 100% power up to 280lm. The mission of solar bollard light is to comply with the requirement of the Dark Sky Association by limiting the upward light waste ratio (UWLR) to <1%. Limiting upward light reduces environmental light pollution and protects the view of our night sky for all. We also offer this solar bollard light in a wildlife-friendly version retaining all the features of the original product. Wildlife-Friendly lighting is specifically designed to minimize the ecological impact on animals and insects. Specification Solar panel LiFePO4 battery LED power Luminous output(lm) Motion sensor type Color temperature Protection rate Light size Certificates Working program Warranty Accessories in package 6.2Watts 5V MONO 38.4WH 3.2V 1.5W max 280lm PIR 2700K~6000K IP65 IK10 275mm H : 900mm CE, ROHS, IP65, FCC 2H 100% + 5H (30%+70%) + 4H 20% + 6H(10%+40%) 5 years Expansion Screw : 4 pieces To tighten the base to ground. It is M6*60 Allen Wrench : 1 piece For tightening the two small screws of the light head and at the bottom of the pillar, It also can be used to turn the light ON/OFF. ON/OFF Switch The ON/OFF switch hole is hidden at the inner position of the light head, in order to reduce the possibility of unexpected operation when it is installed in a public area. Please use the allen wrench to push the on/off. Plastic cover IK10 vandal resistant Mono solar panel Installtion size & lighting direction 82mm ON/OFF button LETO Microwave Inside MUSE PIR External Small screw inside of the hole Pillar Small screw inside of the hole Base Expansion screws 82mm Remote control off 100 25 100 The Sawtooth The installation direction of the base directly determines the direction of the lighting, The light will shine in the direction opposite to the sawtooth Turn ON the light Turn OFF the light 100% power lighting output without motion sensor. 25% power power output without motion sensor. 100% power for 30 seconds when motion sensor is triggered. 100% power from 25% power for 30 seconds when motion sensor is triggered. Set the light work for 4 hours only. Set the light work for whole night.Adobe PDF library 15.00 PDF Suite