User Manual for Feelworld models including: 13.3, 21.5, 1000nit 13.3 Inch High Bright Broadcast Monitor, 1000nit, 13.3 Inch High Bright Broadcast Monitor, High Bright Broadcast Monitor, Bright Broadcast Monitor, Broadcast Monitor, Monitor
File Info : application/pdf, 20 Pages, 1.15MB
DocumentDocument1000nit Broadcast Monitor 13.3"/21.5" User Manual Foreword Thank you for purchasing our high bright broadcast monitor. Please read this manual carefully before using the unit. Have a great experience! Caution 1. Please use the adapter in the accessory, and use the qualified battery if need. 2. Please do NOT expose this product directly in the sunlight, heat, and humid conditions. 3. Please keeps the monitor away from the strong light while using this product to ensure the image effect and long-term use. 4. Please avoid heavy impact or drop onto the ground. 5. Please do NOT use chemical solutions to clean this product. Please wipe the monitor with a clean soft cloth to maintain the brightness of the surface. 6. To avoid damaging the product, please do not take apart or repair the unit by yourself without adjustable component in the unit. Product Feature Full HD panel, viewing details with confidence High bright 1000nit, visible in sunlight Intuitive buttons operation, 4 custom function shortcut buttons to improve work efficient Support 4K@60 HDMI Input and Output Under HDMI signal the audio meter level can be display max 8 1 channels; under SDI signal can be display max.16 channels HDR monitoring, what you see is what you get Custom 3D-LUT, preview film look With Waveform, RGB Histogram, Focus Assist, Monochrome etc. functions, help you accurately exposure and focus every shot Dual speakers Built-in front and rear Tally light, enhance team cooperation Multiple power supply ways (DC IN, XLR , V-mount battery plate) CONTENTS 1. Product Description -------------------------------------------- 3 1.1 Front Panel -------------------------------------------------------- 3 1.2 Rear Panel --------------------------------------------------------- 5 1.3 Power Input Way ------------------------------------------------- 6 1.4 TALLY Indicator Connection ---------------------------------- 7 2. Menu Operation Instruction ---------------------------------- 8 3. Menu Function Instruction ------------------------------------ 9 4. How to Import LUT ---------------------------------------------- 16 5. Support Signal Formats --------------------------------------- 16 6. Parameters --------------------------------------------------------- 17 7. Trouble Shooting ------------------------------------------------ 18 2 1. Product Description (Take 21.5" as an example) Note: Different sizes are slightly different in appearance, please refer to the actual product. 1.1 Front Panel Number Instruction Speaker 3.5mm headphone jack Mute Key When the menu is not displayed, press it to turn on mute. When turned on, the button will display a green constant light; closed the mute function , the button light turn off Signal Input Selection When the menu is not displayed, the signal input source can be selected. After selection, the button will display a green constant light. 3 Custom Function Key Users can enter the main menu User Option - Shortcut Key to set F1~F4 as common function keys. After setting and close menu, simply press to turn on or off the function Return/Exit menu Function when OSD is displayed Rotate to select the desired function or parameter, and press confirm after selection Function when OSD is not displayed Rotate to adjust volume or backlight (can be set to volume or backlight in the menu User Option - Left Right Key Set) Press to enter main menu Power Indicator After the monitor is properly connected to the power, turn on power switch the indicator display red, and display green after input signal Power ON/OFF Tally IndicatorRedGreenYellow 4 1.2 Rear Panel Number Instruction Tally IndicatorRedGreenYellow Handle V-mount Battery Plate 2*3G-SDI Signal Inputs and Outputs 2*HDMI Signal Inputs1*HDMI Signal Output DVI Signal Input (VGA input from this port after conversion module signal conversion) Tally (Indicator) Signal Input 5 LUT File/Upgrade File Importing port The direct DC plug-in power input port supply 4-pin XLR DC power input VESA Holes 100x100mm 1.3 Power Input Way There are three ways of power supply to our monitor: a. Powered by the direct plug-in power input port supply. Please select DC power plug supply and the polarity is as image below: b. Via 4 pin XLR interface power supply, to share power with the camera or via power adapter input. Polarity of the 4-pin XLR power input as below image, please note the polarity of the power input, otherwise it may damage monitor. c. Add battery to the monitor battery plate to supply the power. The product back case including battery plate is available for two types of batteries. Customers can choose different battery plates according to their needs. (If the customers have no requirement on the battery, the factory assembles Sony V-Mount Plate by default). Battery Plates 6 Panasonic Anton Plate Sony V-Mount Plate We assemble the suitable battery plate for the customers according to the different requirements of the batteries. If the customers have no requirement on the battery, the factory assembles Sony V-Mount Plate by default. Remark: According to the different specification of the battery, the capability is different, and the working time for the monitor will be different. Higher capability (working time) will be longer. Without the charging circuit design for the monitor, please remove the battery to charge with the battery charger. Suggestion: Better to remove the battery if don't use this product in a long time. 1.4 TALLY Indicator Connection Indicator colors Pin connection Green 1-5 Red 6-5 Yellow 9-5 7 2. Menu Operation Instruction After the monitor is properly connected to the power, turn on the monitor power switch. 2.1 Press MENU knob to enter OSD main menu, and rotate it to select the first level menu, the icon will turn gray after selected, press MENU knob confirm to enter the secondary menu. 2.2 After enter the secondary menu, rotate MENU knob to select the function, and press it confirm to enter three level menu, then rotate MENU knob to select turn on/off the function or select the detail parameter, press MENU knob confirm after selected 2.3 Press EXIT button to exit the menu 3. Menu Function Instruction Assist 8 All Waves ON, OFF After turning on, waveform, vector, histogram and embedded audio will be shown. Waveform Vector scope Histogram Focus Assist ON, OFF Mode: RGB, YUV, Y Waves Trans.: Off, 25%,50%,75% This essential feature assists with the calibration of professional video cameras. It shows the overall brightness of the image assisting the video professional in correcting exposure. The waveform feature also checks the evenness of the lighting when lighting a chromakey or background. ON, OFF Shows how saturated the image is and where the pixels in the image land on the color spectrum. Histogram: ON, OFF Mode: RGB1, RGB2, Y Y Histogram A quantitative tool to check the picture brightness, display different color for different brightness RGB Histogram It can display the graphic of color tone distribution, can intuitively display the exposure status of the image, and display overlapping histograms in red, green, and blue channels ON, OFF Focus Color: Red, Green, Blue After turned on, the Focus Level (1 10) and Focus Color can be adjusted. It highlights the areas that are in focus so you are able to quickly focus the camera and not miss crucial shots. 9 Embedded Audio Over Exposure Check Field False Color Time Code (Only Under SDI Signal) ON, OFF Display an audio diagram after enabled to help you understand the audio status being used. Under HDMI Signal, max display 8 channels Mode: pr1, gp1, gp2, gp12 Audio Out: ch1-2, ch3-4, ch5-6, ch7-8 pr1 display1-2 channel, gp1 display 1-4 channel, gp2 display 5-8 channel, gp12 display 1-8 channel Under SDI Signal, max display 16 channels Mode: pr1, gp1, gp2, gp12, gp3, gp4, gp14 Audio Out: ch1-2, ch3-4, ch5-6, ch7-8, ch9-10, ch11-12, ch13-14,ch15-16 pr1 display1-2 channel, gp1 display 1-4 channel, gp2 display 5-8 channel, gp12 display 1-8 channel, gp3 display 9-13 channel, gp4 display 14-16 channel, gp14 display 1-16 channel ON, OFF After the exposure is turned on, the Exposure Level (10RE 100IRE),, can be adjusted. On, Off Mode: red, green, blue, gray When enabled, hue and saturation adjusted quickly and accurately. ON, OFF Mode: Normal, ARRI An image that depicts an object in colors that differ from those a photograph (a true color image) would show. ON,OFF Mode: LTC, VITC Same as camera time code consists of four groups of numbers, which respectively represent hours, minutes, seconds and frames. Through the time code, you can quickly find a specific 10 frame in the video, so that in the later multi-camera editing, you can use the time code function to quickly align the video materials shot at different camera positions at the same time, saving post-production time. Marker Grids Safe Frames Center Marker Ratio Marker ON, OFF Mode: 2x2, 3x3, 4x4, 5x5, 6x6, 7x7, 8x8, 9x9 Color: Red, Green, Blue, Black, White, Gray The area of the picture can be divided into 4 ,9, 16, 25, 36, 49,64,81 equal grids. ON, OFF Mode: 80%, 85%, 90%, 93%, 96%, 2.35:1 Marker Line Color: Red, Green, Blue, Black, White, Gray ON, OFF Marker Line Color: Red, Green, Blue, Black, White, Gray ON, OFF Mode: 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1 Marker Line Color: Red, Green, Blue, Black, White, Gray Modified Mark: 0~5 Image Scan Mode Under Scan, Over Scan Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen 11 Aspect Ratio Anamorphic Image Flip Zoom Mode ON, OFF Mode: 1.33x, 1.6x, 2.0x, 2.0x mag, User Under User, you can custom adjust nx (1.20x~2.00x) Allows you to use anamorphic lenses or adapters and see the image unsqueezed, even if your camera does not de-squeeze in camera. ON, OFF Mode: H Flip, V Flip, H_V Flip ON, OFF Mode: 2X, 4X, 9X, 16X, User Under User, you can adjust 100%~200% It is HD signal in any part, an amplification for high quality close-up. Image Freeze P2P (Pixel to Pixel) ON, OFF ON, OFF Enable the filmmaker to check the image from the 1:1 signal source without scaling.This feature is essential for capturing optimum detail. User Option ON, OFF LUT is a table for quickly looking up and output specific color LUT data. By loading different 3D-LUT tables, it can quickly recombine color tone to form different color styles. 12 HDR Display Adjustment Color Adjustment LUT Import: Confirm LUT Table: display the built in SLOG2, SLOG3, LOGC, VLOG and the custom LUTs HDR: ON, OFF Mode: HLG1, HLG2, HLG3 HDR can provide more dynamic range and the details of image, it is better to reflect the visual effects in the real environment. Backlight: 0~100 Adjust the screen brightness Brightness: 0~100 Adjust the image brightness Contrast: 0~100 Adjustment of the ratio between the brightest and darkest parts of the image . When adjusting, pay attention to the sense of hierarchy in the image. If the proportion is too large or too small, it can cause the image to lose its colorful appearance. Saturation: 0~100 Adjustment of color concentration Tint: 0~100 It is the most accurate standard for distinguishing various different colors. Determine what a certain color is actually color via the color appearance. Color Temp.: 5600K, 6500K, 9300K, User Under the "user", the red, green, and blue values of the image can be adjusted (0~255) F1~F4 Shortcut List: All Waves, Waveform Vector, Histogram, 13 Shortcut Key Left Right Key Set Embedded Audio, Center Marker, Safe Frames,Grids, Focus Assist, False Colors , Over Exposure, Anamorphic, Image Flip, Aspect Ratio Set the shortcut function e.g.: Using the MENU knob to select and confirm. Enter main menu --User Option--Shortcut Key--F1 select one of pop-up functions, such as "All Waves", press confirm after selected and the icon show light gray. Then when you exit menu, you could press F1 directly on the front of panel to turn on "All waves" function. Same setting for F2~F4 Backlight, Volume After selecting one of them, when the menu is not displayed, rotate the MENU knob can directly adjust System Language OSD Option English, , Español, Português, Français, Nederlands, Deutsch, , , , OSD Time: off, 15s, 30s, 45s Select the display time of the menu on the screen OSD Trans: OFF, 25%, 50%, 75% Adjust the transparency of the menu picture background on the screen. No Signal: Red, Green, Blue, Black, White, Gray Mute: ON, OFF Volume: 0~100 14 Volume Reset Firmware Update Adjusting the speaker volume After confirmed, the system back to original setting. Firmware Version FTY CAL: On/Off Confirm Each monitor has color calibration before ex-factory, the factory calibration button turn on by default. After turning off, the monitor will without has color calibration, suggest don't turn it off. How to upgrade? 1. USB flash driver format Supports FAT32 2. After copying the update file to USB flash driver and inserting it into USB port of the monitor, use MENU knob to select Confirm and press to update. 3. The monitor will turn off automatically after finishing, please turn on manually 4. Check the firmware version whether the latest one 4. How to Import Custom LUT 4.1 USB flash driver format Supports FAT32 4.2 Max Files Limit Maximum 32 Lut files 4.3 File requirements The LUT file format suffix should be .cube Single file not exceeded to 7.9Mb 15 Support LUT-3D-Size 16,17,32,33,64,65 Remark: LUT file name must be English or Arabic numerals 4.4 Steps for loading 4.4.1 Make sure the USB flash driver correctly insert 4.4.2 Enter main menu User Option--LUT-- Import -- Confirm to load the monitor will auto detect the USB flash driver If there is valid LUT file in USB flash driver, the monitor will load LUT files and show "[n] name. The [n] shows the quantity number. The "name" should in LUT files' name. If load successful, the screen will show "complete[n]". [n] Stands for the quantity number for LUT files should under 32. PS: How to clear up the imported LUTs? Insert a empty USB flash driver to the monitor, enter main menu User Option--LUT-- Import -- Confirm, the imported LUTs will be clear up. 5. Support Signal Format HDMI SDI 720p(60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50 1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF) 4K UHD 3840×2160p (60/50/30/29.97/25/24/23.98Hz) 4096×2160p (60/50/30/29.97/25/24/23.98Hz) 720p(60/59.94/50/30/29/25/24/23.98) 1080i(60/59.94/50) 1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF) 16 6. Parameters Panel Size Resolution Dot Pitch (mm) Aspect Ratio Brightness Contrast Viewing Angle 13.3 1920×1080 0.153 (H) X 0.153 (V) mm 16:9 1000cd/m² 800:1 85°/85°(L/R) 85°/85°(U/D) 21.5 2139.280×1080 109.22407x91508(W0 ) X 0.24795 (H) mm 16:9 1160:090cd/m² 215000c0d:1/m² 1000:1 89°/89°(L/R) 89°/89°(U/D) Backlight Inputs LED 2*3G-SDI , 2*HDMI 2.0, DVI-I, Tally Outputs 2*3G-SDI, 1*HDMI 2.0 Upgrade/LUT IAmupdoiort USB2.0 Speakers, 3.5mm Headphone Jack Input Voltage DC 1024V Power CSpoencsiuaml Fputinocntion 28W TALLY Indicators 44W Working TSetomrpagereature TUenmitpSeirzaeture 0 50 -20 60 330.5x231x30.15mm 511.5×355.5×34.8mm Unit Weight 2.07kg (w/o feet stand) 4.16kg (w/o feet stand) 2070g 5900g 2750g 7. Trouble Shooting If there is any problem when using the unit, please try following ways to inspect and solve. Please contact us if you still cannot solve it or have other problems. 17 Without image display Video cable off or connect incorrectly Without video signal input Monitor cannot be powered on Supply voltage instability self-contained power supply, polarity connect inversely Trouble shooting Check the quality of the cable, make sure the correct input interface Check the signal source and output interface connect is corrected or not Check whether the power is connected, put the power switch to "on" position The power adapter or battery is poor connected with battery plate Reference "Power input way" reconnect Image/color display abnormal Trouble shooting Video cable poor contact Change video cable, try again Video signal interfered by Move to another environment to try again external environment Video input signal amplitude too Check signal source video output, or change signal low source and have a try. Menu color saturation Enter menu to check color, or reset to factory adjustment closing settings Check Field set in mono or black Reset Check Field, back to the color & white Image deformation Reset the image ratio Speaker without sound Audio cable off or improper connection Volume adjustment was closed Trouble shooting Confirm connected with the corresponding input port Reset the volume control and adjust to a proper position 18 HDMI cable poor Connected No sound after switch video signal Check the quality of cable, or change cable and have a try This monitor is with audio signal only in audio input and HDMI state Remark: If there are still other problems, please contact with our related technical persons. If there are changes without prior notice. 19WPS 文字