Installation Guide for FORTIN models including: Golf-R, Golf GTI, EVO-ALL Interface Module, EVO-ALL, Interface Module, Module

Stand Alone & EVO-ALL & Volkswagen Golf R & Golf GTI (2022) - Push-to-Start

EVO-ALL | Universal all-in-one data bypass and interface module. | Fortin Electronic Systems


File Info : application/pdf, 8 Pages, 3.59MB

PDF preview unavailable. Download the PDF instead.

EVO-ALL IG SAL BI VW-GOLF-R GTI 2022 PTS KW A 109901
ALL

Page 1 / 8

STAND ALONE INSTALLATION INSTALLATION STAND ALONE

REV.: 20241128

Guide # 109901
ADDENDUM - SUGGESTED WIRING CONFIGURATION ADDENDA - SCHÉMA DE BRANCHEMENT SUGGÉRÉ

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES. COMPATIBLE AVEC VÉHICULE À TRANSMISSION AUTOMATIQUE SEULEMENT.
Vehicle functions supported in this diagram (functional if equipped) | Fonctions du véhicule supportées dans ce diagramme (fonctionnelles si équipé)

Key Control Contrôle de la clé Lock Unlock Disarm Hazard Lights Tachometer Door Status Trunk Status Hood Status* Hand-Brake Status Foot-Brake Status OEM Remote monitoring

VEHICLE VEHICULES VOLKSWAGEN Golf-R Golf GTI

YEARS ANNÉES
Push-to-Start 2022-2024 Push-to-Start 2022-2024

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

MODEL: EVO-ALL DATE:02/2019 FORTIN.CA
SN: 000000 00000
MADE IN CANADA © 2018 ALL RIGHTS RESERVED

2019

COMPATIBLE MODULE
REQUIRED:

QR CODE ON THE LABEL
MANUFACTURED AFTER: 2019

MODULE COMPATIBLE

CODE QR SUR L'ÉTIQUETTE

REQUIS:

FABRIQUÉ APRÈS: 2019

FIRMWARE VERSION VERSION LOGICIELLE
61.[30]
VW MINIMUM

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool,
sold separately.
Pour ajouter la version logicielle et les options, utilisez l'outil FLASH LINK UPDATER
ou FLASH LINK MOBILE, vendu séparément.

Program bypass option: Programmez l'option du contournement:

UNIT OPTION OPTION UNITE
C1

IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
SI LE VÉHICULE N'EST PAS ÉQUIPÉ D'UN CONTACT DE CAPOT FONCTIONNEL:

D6

A11

OFF NON

DESCRIPTION
OEM Remote status (Lock/Unlock) monitoring Suivi des status (Verrouillage/Déverrouillage) de la télécommande d'origine Push-to-Start Push-to-Start
Hood trigger (Output Status).
Contact de capot (état de sortie).

NOTES

Parts required (Not included)
1x Vehicle Key 2x 1 Amp. Diodes 1x 7 Amp. Fuse 1x relay

Pièce(s) requise(s) (Non incluse(s))
1x Clé du véhicule 2x Diodes 1 Amp. 1x Fusible 7.5 Amp. 1x relais

1 KEY REQUIRED FOR THE INSTALLATION

1 CLÉ REQUISE À L'INSTALLATION

MANDATORY INSTALL | INSTALLATION OBLIGATOIRE

* HOOD PIN
CONTACT DE CAPOT

HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED

IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, A11

OFF NON

SET FUNCTION A11 TO OFF.

STATUT DE CAPOT : LE CONTACT DE CAPOT, DOIT ÊTRE INSTALLÉ SI LE
VÉHICULE PEUT DÉMARRER À DISTANCE, LORSQUE LE CAPOT EST OUVERT, PROGRAMMEZ LA FONCTION A11 À NON.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG
CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

Notice: l'installation des éléments de sécurité est obligatoire. Le contact de capot est un élément de sécurité essentiel et doit absolument être installé.

CE MODULE DOIT ÊTRE INSTALLÉ PAR UN TECHNICIEN QUALIFIÉ, TOUTE
ERREUR DANS LES BRANCHEMENTS PEUT OCCASIONNER DES DOMMAGES
PERMANENTS AU VÉHICULE.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l'objet de changement sans préavis. Voir www.fortin.ca pour la récente version.

PARTS REQUIRED (NOT INCLUDED) | PIÈCES REQUISES (NON INCLUSES)

1x FLASH LINK UPDATER,

1x FLASH LINK MANAGER
SOFTWARE | PROGRAMME

1x

Microsoft Windows Computer with Internet connection

Ordinateur Microsoft Windows

avec connection Internet

OR

OU

1x FLASH LINK MOBILE

1x FLASH LINK MOBILE APP

Smartphone AndroId or iOS with Internet

1x

connection (provider charges may apply).

Téléphone Intelligent Android ou iOS

avec connection Internet (frais du

fournisseur Internet peuvent s'appliquer).

MANDATORY | OBLIGATOIRE

HOOD PIN
CONTACT DE CAPOT

REMOTE START SAFETY OVERRIDE SWITCH COMMUTATEUR DE SÉCURITÉ DE DÉSACTIVATION DU DÉMARREUR À DISTANCE
ON VALET SWITCH COMMUTATEUR VALET
OFF

Part #: RSPB available, Sold separately. Pièce #: RSPB disponible, vendu séparément.

Page 2 / 8
Notice: the installation of safety elements are mandatory. The hood pin and the valet switch are essential security elements and must be installed. Notice: l'installation des éléments de sécurité est obligatoire. Le contact de capot et le commutateur de valet sont des éléments de sécurité essentiels et doivent absolument être installés.

STAND ALONE CONFIGURATION | CONFIGURATION EN DÉMARREUR AUTONOME

Program bypass option OEM Remote Stand Alone Remote Starter:
Programmez l'option du contournement Démarreur à distance Autonome avec télécommande d'origine :
Program bypass option with oem remote: Programmez l'option du contournement
avec télécommande d'origine:

UNIT OPTION OPTION UNITE
OOURD1D.11.1U0N D1.1 UN
UNIT OPTION OPTION UNITE
C1

Program bypass option with RF KIT antenna:
Programmez l'option du contournement avec antenne RF:

UNIT OPTION OPTION UNITE
H1 to H6 H1 à H6

DESCRIPTION
BLOy CdKef,aUuNltL, LOOCCKK, ,LLOOCCKK, LOCK
Par défaut, VERROUILLE,VERROUILLE,VERROUILLE
LVOECRKR, OUNULILOLCEK, DLOÉCVKERROUILLE, VVEERRRROOUUILILLEL,EDÉVERROUILLE,VERROUILLE
DESCRIPTION
OEM Remote Monitoring
Supervision de la télécommande d'origine
DESCRIPTION
Supported RF Kits and select RF Kit Kit RF supportés et sélectionnez le KIT RF

REMOTE STARTER FUNCTIONALITY | FONCTIONNALITÉS DU DÉMARREUR À DISTANCE

All doors must be closed. Toutes les portes doivent
être fermées

Press the OEM remote's Lock Unlock Lock buttons
to remote-start (or remote-stop) the vehicle.
Appuyez sur les boutons Verrouillage Dérrouillage Verrouillage de la télécommande
d'origine pour démarrer à distance (ou arrêter à distance) le véhicule.

START
The vehicle will START. Le véhicule DÉMARRE.

REMOTE STARTER DIAGNOSTICS

DIAGNOSTIQUE DU DÉMARREUR À DISTANCE

MODULE RED LED | DEL ROUGE DU MODULE

x2 flash : Brake ON Frein Activé

x3 flash : No tach

Pas de Tach

x4 flash : Ignition

Clé de contact

before start détectée avant

démarrage

x5 flash : Hood Open Capot Ouvert

REMOTE STARTER WARNING CARD | CARTE D'AVERTISSEMENT DE DÉMARREUR À DISTANCE
WARNING | ATTENTION

CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.
COUPEZ CETTE CARTE D'AVERTISSEMENT ET COLLEZ-LA À UN ENDROIT VISIBLE: ou utilisez la trousse RSPB, vendue séparément.

REMOTE STARTER DÉMARREUR À DISTANCE

THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON
ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A
SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE
DASHBOARD BEFORE WORKING ON THE VEHICLE.

LE VÉHICULE PEUT DÉMARRER SOIT: EN APPUYANT 3 FOIS CONSÉCUTIVEMENT SUR
LE BOUTON VERROUILLAGE DE LA TÉLÉCOMMANDE DU VÉHICULE OU PAR UN TÉLÉPHONE INTELLIGENT. ACTIONNEZ EN
POSITION `ON' LE COMMUTATEUR DE SÉCURITÉ SITUÉ SOUS LE TABLEAU DE BORD
AVANT LES TRAVAUX D'ENTRETIEN.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l'objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
KEY CONTROL | CONTRÔLE DE LA CLÉ

Page 3 / 8

3 Remove the battery from the key fob.

Retirez la batterie de la télécommande.

+

3

Key control Contrôle de la clé

3 This installation is easier with a transponder antenna*
(*Part #: ARE-1R0, Sold separately).

Cette installation est simplifiée avec une antenne transpondeur*
(*Part #: ARE-1R0, vendu séparément).

Back of Key fob. Dos de la télécommande.

Remove the adhesive from the back of the antenna ring* and stick it on the back of the key fob.

Collez l'antenne* auto-collante au dos de la télécommande et coller au dos de la télécommande comme montré.

OR

OU

3

Make 5 to 10 loops with a 22 gauge

wire on the back of the key fob.

Faire 5 à 10 tours avec un fil de calibre 22 au dos de la clé télécommande.

Back of Key fob. Dos de la télécommande.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l'objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
DESCRIPTION | DESCRIPTION

1

At push-to-Start button Au bouton Start/stop

Page 4 / 8
Junction connector in center console
4 Connecteur de jonction dans la console
centrale TRANSPONDER

(-) START/STOP1 (-) START/STOP2
Automatic Tranmission only Transmission Automatique Seulement

Center console Console centrale

52

14

2

OBDII connector Connecteur OBDII

(-)GROUND

VESCM - Electrical System Control Module under dash driver side, above Driver Kick Panel VESCM - Module de contrôle de système électrique sous le tableau de bord côté conducteur, au-dessus du panneau latérale.
5

(+)12V
5B

A

B

C

5A

(-)HORN
5C

(~)CAN LOW (~)CAN HIGH

(+)FOOT BRAKE

Pull the clips to release the cover of the connector. Soulevez les clips pour sortir le couvert du connecteur.
Clips

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l'objet de changement sans préavis. Voir www.fortin.ca pour la récente version.

Page 5 / 8

AUTOMATIC TRANSMISSION WIRING CONNECTION | SCHÉMA DE BRANCHEMENT TRANSMISSION AUTOMATIQUE

Hood pin only required on vehicles not equipped with a factory hood pin. Commutateur de capot requis seulement si le véhicule n'est pas équipé de cette composante.
SAFETY OVERRIDE SWITCH COMMUTATEUR DE SÉCURITÉ

OPTIONAL RF KIT KIT RF OPTIONNEL
WITH RF-KIT AVEC KIT-RF

RF-KIT REMOTE STARTER
KIT-RF DÉMARREUR À DISTANCE
WITH | AVEC DATA-LINK: Direct connection Branchement directe

RS3 IN/OUT (+)Ignion
RS2 IN (+)12V Battery RS1 Ground | Masse

Can be required Peux être requis

Start / Stop external control Contrôle de démarrage/arrêt externe
(-) Lock/Unlock input external control | Contrôle du (-) verrouillage devérrouillage entrée externe

WITHOUT RF-KIT: SANS KIT RF:

B4 Red (+)12V Battery B3 Black Ground | Masse
Cut | Coupez Red B4 Cut | Coupez Black B3
Blue B2 White B1

Yellow

(-) Lock

Purple

(-) Unlock Purple/White

Green

White

Orange

Orange/Black

Hood pin

Dk.Blue

Red/Blue

(-)Start/Stop Lt.Blue/Black

Black

Pink

Start/Stop external Yellow/Black

Brown/White

Pink/Black

(+)IGNITION OUTPUT Purple/Yellow

Green/White

Green/Red

White/Black

(-)Horn

Lt.Blue

B
In AA11 In AA22 In AA33 Out AA44 Out AA55 In AA66
A In AA77
In AA88 In AA99
A1100 Out AA1111 Out A1122
In A1133 Out A1144 Out A1155
A1166 A1177 A1188 A1199 A2200

CC55 Brown

CC44 Gray/Black

CAN LOW

CC33 Gray

CAN HIGH

C CC22 Orange/Brown CC11 Orange/Green

D66 White/Red
D D55 White/Blue D44 White/Green D33 Yellow/Red D22 Yellow/Blue D11 Yellow/Green

Transponder Key Transponder/Key (+)Foot Brake (+)12V

A10

(-) START/ (-) START/

STOP1

STOP2

Purple/Blue Purple Mauve/Blue Mauve

C4
(~)CAN LOW

C3
(~)CAN HIGH

Orange/Brown Green Orange/Brun Vert

A20

87

85

87a 86
30

30

86

87

85

87a 30

(+)12V

87a 87

85

87a 86
30

(-)HORN

Red/Brown RougeBrun

D3 (+)FOOT BRAKE
Black/Red Noir/Rouge

85 87

85

87a 86

30

7.5 Amp Fuse

85/ 87

85

87a 86

30

B3 or RS4 B4 or RS2/D2D5

(-) GROUND

(+)12V

ARE-0R1

D4

D4 ARE-0R1

D6 TRANSPONDER

Brown Brun

Red/White Purple/White Purple Rouge/Blanc Mauve/Blanc Mauve

Brown Brun

GOLF R / GTI 1A Diode 1A Diode
CUT CUT

12 11 10 9 8 7 6 5 4 3 2

37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13

62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38

73

12 11 10 9 8 7 6 5 4 3 2

37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13

62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38

73

5
1234 5 678

72 71 70 69 68 67 66 65 64

87 6 5 4 3

23 22 21 20 19 18 17 16 15 14 13 12 11 10 9

38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 46 45 44 43 42 41 40 39

72 71 70 69 68 67 66 65 64

10 9 8 7 6 5 4 3 2 1

ABC

1
At push-to-Start button center console Black 10-PINS
connector - Back view
Au bouton dans la console centrale
Connecteur Noir de 10-PINS - Vue
de dos

VESCM - Electrical System

Control Module under dash

driver side, above Driver

Kick Panel

VESCM - Module de

contrôle de système

électrique sous le tableau

de bord côté conducteur,

63

au-dessus du panneau

latérale.

5A

Black cover with Bleu 73-PINS connector - Back view

Couvert Noir Connecteur Bleu de 73 pins- Vue de dos

1

5B
Black cover Black 46-PINS connector - Back view
Couvert Noir Connecteur Noir de 46 pins- Vue de dos

1

2

63

5C
Black cover Green 73-PINS connector - Back view
Couvert Noir Connecteur Vert de 73 pins- Vue de dos

1

9 10 11 12 13 14 15 16
2
OBDII Front view Vue de face
5 2

14 13 12 11 10 9 8 17 16 15
7654321

3 14

4
Junction connector in center console Black 14-PINS connector - Back
view Connecteur de jonction dans la console centrale Connecteur Noir de 14-PINS - Vue
de dos

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l'objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION

Page 6 / 8

1
x1
HOLD
2
RELEASE

ON

BLUE BLEU

Press and hold the programming button: Connect the 4-Pin Data-link connector.

Appuyez et maintenir enfoncé le bouton de programmation: Branchez le connecteur Data-Link à 4-Broches.

 The BLUE, RED, YELLOW and BLUE & RED LEDs will
alternatively illuminate.

 Les DELs BLEUE, ROUGE, JAUNE et BLEUE & ROUGE
s'allumeront alternativement.

Release the programming button when the LED is BLUE.
Relâchez le bouton de programmation quand la DEL est BLEU.

If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.
Si le DEL n'est pas BLEU débranchez le connecteur 4 pins (Data-Link) et allez au début de l'étape 1.

3

Insert the required remaining connectors.

Insérez les connecteurs requis restants.

4
x1
PRESS

IGN ON

5
x1
PRESS

6

x1

PRESS

OFF

IGNITION OFF
ON

IGNITION ON
ON

Press the Push-to-Start button to turn ON the ignition.

Appuyez 1 fois sur le bouton démarrage (Push-to-Start) pour allumer l'ignition.

IGNITION ON

PRESS X1

ON

OFF

WAIT

FLASH RAPIDLY

Press and release the programming button once (1x).
 The BLUE LED will turn off.
Wait,
 The BLUE LED will flash rapidly.

Appuyez et relâchez 1 fois le bouton de programmation.
 La DEL BLEUE s'éteint.
Attendre,
 La DEL BLEU clignotera rapidement.

IGNITION ON

IGNITION OFF OFF

Press the Push-to-Start button once to turn off the ignition.
 The BLUE LED will turn off.

Appuyez 1 fois sur le bouton démarrage (Push-to-Start) pour éteindre l'ignition.
 La DEL BLEUE s'éteint.

The module is now programmed.

Le module est programmé.

This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l'objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
REMOTE STARTER FUNCTIONALITY | FONCTIONNALITÉS DU DÉMARREUR À DISTANCE

START

UNLOCK

Page 7 / 8

All doors must be closed. Toutes les
portes doivent être fermées

Remote start the vehicle.
Démarrez à distance.

Unlock the doors with either:
· The OEM remote · The remote-starter
remote.
Déverrouillez les portes avec soit:
· la télécommande d'origine
· la télécommande du démarreur à distance.

Enter the vehicle with the Intelligent
SmartKey.
Entrez dans le véhicule avec la clé intelligente (SmartKey) sur
vous

The vehicle can now be put in to gear and driven.
Vous êtes maintenant prêt à
embrayer et prendre la route.

Page 8 / 8

ALL

MODEL: EVO-ALL DATE:02/2019 FORTIN.CA SN: 000000 00000
MADE IN CANADA © 2018 ALL RIGHTS RESERVED
Module label | Étiquette sur le module

Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
Notice: Mise à jour microprogramme et Guides d'installations Des mises à jour du Firmware (microprogramme) et des guides d'installation sont mis en ligne régulièrement. Vérifiez que vous avez bien la dernière version logiciel et le dernier guide d'installation avant l'installation de ce produit.

WARNING The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
MISE EN GARDE L'information de ce guide est fournie sur la base de représentation (telle quelle) sans aucune garantie de précision et d'exactitude. Il est de la seule responsabilité de l'installateur de vérifier tous les fils et circuits avant d'effectuer les connexions. Seuls une sonde logique ou un multimètre digital doivent être utilisés. FORTIN SYSTÈMES ÉLECTRONIQUES n'assume aucune responsabilité de l'exactitude de l'information fournie. L'installation (dans chaque cas) est la responsabilité de l'installateur effectuant le travail. FORTIN SYSTÈMES ÉLECTRONIQUES n'assume aucune responsabilité suite à l'installation, que celle-ci soit bonne, mauvaise ou de n'importe autre type. Ni le manufacturier, ni le distributeur ne se considèrent responsables des dommages causés ou ayant pu être causés, indirectement ou directement, par ce module, excepté le remplacement de ce module en cas de défectuosité de fabrication. Ce module doit être installé par un technicien qualifié. L'information fournie dans ce guide est une suggestion. Ce guide d'instruction peut faire l'objet de changement sans préavis. Consultez le www.fortinbypass.com pour voir la plus récente version.
Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE

www.fortinbypass.com
WEB UPDATE | MISE À JOUR INTERNET



References

Adobe PDF Library 17.0 Adobe InDesign 19.4 (Windows)