Owner's Manual for BUSH models including: BUCL6082, Built Integrated Under Larder Fridge, BUCL6082 Built Integrated Under Larder Fridge
12 ore fa — Thermostat Setting. Page 6. 4. Replacement Lamp. Page 7. 5. Replacement Door Switch. Page 8. 6. Additional Support. Page 9. Precautions:.
Customer Service Manual for BUSH BEUCL6082 INTEGRATED LARDER (Argos Product 940/7594)
Customer Service Manual for Bush BEUCL6082 Integrated Under Counter Larder Fridge White (Argos Product 940/7594)
1 Customer service manual Built Under Larder Contents 1 Precautions 2 Door 3 Thermostat Setting 4 Replacement Lamp 5 Replacement Door Switch 6 Additional Support Page 2 Page 4 Page 6 Page 7 Page 8 Page 9 Precautions: Always follow safety advice. Always switch off and unplug the appliance before attempting to remove any part. Always wear appropriate protective equipment when carrying out any work. Always use the correct tools for carrying out any work. Some repairs may not be suitable for unqualified users to carry out. If in doubt seek the advice of a profession repairer. 2 SAFETY PRECAUTIONS 3 Applicable models REPLACEMENT PROCEDURE General EN Part name Door A- Changing The Door Swing Direction to Right Hand 1- Unscrew the two screws fixing the top hinges (Fig-1) and bottom hinges. (Fig-2) Remove the doors. (Fig-1) Figure 1 Figure 2 2. Remove the top hinge screw caps (big) on the left side (Fig-3) and insert them to the right side. (Fig-4) Figure 3 3. Remove the bottom hinge screw caps (big) on the left side and insert them to the right side. (Fig-5) Figure 4 4. Unscrew the two screws fixing the top hinge and bottom hinges. Remove the hinges. (Fig-6) Figure 5 Figure 6 5. Assemble the top hinge to the bottom of the door (Fig-7) and assemble the door and then assemble the bottom hinge to the top of the door. (Fig-8) 4 Figure 7 Figure 8 Applicable models REPLACEMENT PROCEDURE General EN Part name Door B- Changing The Freezer Door Swing Direction 1- Unscrew the screw fixing the freezer door hinge (Fig-1) and remove the freezer door (Fig-2) Figure 1 2- Unscrew the screw fixing the freezer door holder and remove it. (Fig-3) Figure 2 3- Screw the freezer door holder to the right side. (Fig4) Figure 3 Figure 4 4- Assemble the freezer door and fix the freezer door hinge by tightening the screw. (Fig-5) Figure 5 5 Applicable models REPLACEMENT PROCEDURE Thermostat General EN Part name Setting 6 Applicable models REPLACEMENT PROCEDURE General EN Part name Replacement Lamp Unscrew the screws which are fixing the lamp cover and change lamp. 7 Applicable models REPLACEMENT PROCEDURE Replacement the Door General EN Part name Switch Stick a tape to protect the body plastic. Flex it with the Also flex the top-side of the switch and then displace help of a tool like a slotted screwdriver by pulling. Put the switch connector cable in the housing. First place the top-side of the switch and then push the bottom side. After the switch is placed, complete the assembly by pushing. 8 Applicable models ADDITIONAL SUPPORT General EN The following parts are available for the customer to undertake repairs at their own risk. Please carefully follow the guidance given in this manual including all safety measures. · Door Handles · Door Hinges · Trays · Baskets · Door Gaskets Parts can be obtained by calling the support service listed in this section. All repairs in this manual can be achieved using commonly available tools. If you are in any doubt of your ability to carry out a repair, please use a professional repairer, also available through the support service. Damage sustained to the appliance or future faults arising from poorly carried out repairs will not be covered under warranty. 9 10 11Adobe PDF Library 21.11.71