Philips BHD628 Hair Dryer

Introduction

Congratulations on your purchase and welcome to Philips! Register your product at www.philips.com/welcome to fully benefit from Philips support.

The Philips BHD628 hair dryer features SenseIQ technology, which personalizes your drying experience. It continuously senses your hair's temperature and adjusts the heat to prevent overheating, leaving your hair moisturized, shiny, and healthy-looking. The indicator light [?] on top of the hair dryer illuminates when SenseIQ is active.

Important Safety Information

⚠️ WARNING: Read this user manual carefully before use and keep it for future reference.

• Do not use this appliance near water. When used in a bathroom, unplug after use as proximity to water is a risk even when switched off.
• Do not use near bathtubs, showers, basins, or other water-containing vessels.
• Always unplug after use.
• If the appliance overheats, it switches off automatically. Unplug and let it cool down. Check grilles for blockages (fluff, hair) before restarting.
• If the main cord is damaged, it must be replaced by Philips, an authorized service center, or similarly qualified persons to avoid hazards.
• This appliance can be used by children aged 8+ and persons with reduced physical, sensory, or mental capabilities, or lack of experience/knowledge, if supervised or instructed on safe use and hazards. Children must not play with the appliance. Cleaning and maintenance must not be done by children without supervision.
• For additional protection, install a residual current device (RCD) with a rated residual operating current not higher than 30mA in the bathroom's electrical circuit. Consult your installer.
• Do not insert metal objects into air grilles to avoid electric shock.
• Never block air grilles.
• Ensure the appliance's voltage matches local power voltage before connecting.
• Do not use for purposes other than described in this manual.
• Do not use on artificial hair.
• Never leave the appliance unattended when connected to power.
• Do not use accessories or parts from other manufacturers or not specifically recommended by Philips, as this invalidates the guarantee.
• Do not wind the main cord around the appliance.
• Wait for the appliance to cool down before storing.
• Do not pull on the power cord; always unplug by holding the plug.
• Do not operate with wet hands.
• Always return the appliance to an authorized Philips service center for examination or repair. Repairs by unqualified persons can be extremely hazardous.

Electromagnetic Fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

Recycling

This symbol [♻️] means this product shall not be disposed of with normal household waste (2012/19/EU). Follow your country's rules for separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.

Product Features and Usage

Understanding Your Hair Dryer

The hair dryer includes the following components:

• Styling nozzle [Styling Nozzle]
• Air outlet grille [Air Grille]
• Handle [Handle]
• Power cord [Power Cord]
• Speed/Temperature controls [Controls]
• Hanging loop [Hanging Loop]
• Air inlet grille [Air Grille]
• Diffuser [Diffuser]
• Cool Shot button [Cool Shot Button]

How to Use Your Hair Dryer

1. Connect the plug to a power outlet and switch on the appliance. The speed indication displays '0' [Power Off Symbol] when off.
2. Select the styling nozzle [Styling Nozzle] (i, g) for drying/styling or the diffuser [Diffuser] (h) for curly hair.
3. Adjust air speed [Speed Control] (c) and temperature [Temperature Control] (e) as needed.

Speed and Temperature Settings

Using the Styling Nozzle (Refer to Fig. C)

1. Attach the styling nozzle [Styling Nozzle] (g) and select 'Fast' or 'Dry' setting.
2. Section hair (max 5cm wide). Place a brush under the hair near the roots. With the nozzle pointing downwards, move the brush and dryer in one motion from root to tip. Repeat on other sections.
3. Press the Cool Shot button [Cool Shot Button] (a) for cool airflow to set your style.
4. To create soft flicks: Slightly turn the brush inward at the ends. Continuously press the Cool Shot button [Cool Shot Button] and hold the brush for 3-4 seconds.

Using the Diffuser (Refer to Fig. D)

1. Attach the diffuser [Diffuser] (h) to the dryer.
2. Hold the dryer vertically. Place hair in a circular motion between the pins and move slowly towards the scalp.
3. Press the Cool Shot button [Cool Shot Button] (a) for cool airflow to set your style.

SenseIQ Technology and Attachments

SenseIQ technology adapts to your hair and drying needs. The table below shows when SenseIQ is active or inactive based on attachments and settings.

After Use

Cleaning and Storage

1. Switch off the appliance and unplug it [Power Off Symbol].
2. Place it on a heat-resistant surface until it cools down.
3. Clean the dryer body regularly with a damp cloth. Use a toothbrush or vacuum cleaner to clear dust from the grilles (Refer to Fig. F).
4. Store in a safe, dry, dust-free place. You can also hang it by the hanging loop [Hanging Loop] (f).

Guarantee and Service

For information or problems, visit www.philips.com/support or contact the Philips Customer Care Centre in your country (phone number in the worldwide guarantee leaflet). If no center exists in your country, visit your local Philips dealer.