EYL-Everywhere in your life
Quantum Shieldz Cipher - Anti-Eavesdropping Solution - Quantum Shieldz Cipher(TM)
User Manual for Quantum Shieldz models including: QSC01, 2A4M4-QSC01, 2A4M4QSC01, Cipher App, Cipher, App
EYL Inc. QSC01 2A4M4-QSC01 2A4M4QSC01 qsc01
File Info : application/pdf, 1 Pages, 227.23KB
DocumentDocumentBefore Use Welcome users of Quantum Shieldz® CipherTM. This manual introduces how to use Quantum Shieldz® CipherTM (hereinafter referred to as CipherTM). As of now, CipherTM app is compatible to Android OS version only. iOS version is planned to be released. CipherTM is a device which pairs with a smartphone via bluetooth that may affect the audio quality of phone call depending on the user's communication conditions. When the phone call voice quality deteriorates, reducing the distance between the device and smartphone(10-20 cm or less) or moving to a place with fewer bluetooth devices helps improve the voice quality of phone call. The capacity of the battery is 1000mAh and it lasts less than 8 hours in standby mode (5-6 hours on continuous phone call). While CipherTM of the other party you are calling is turned off, it can still receive call requests or text messages and thus it is recommended to keep the device turned off when not in off, continuous use. Screen capture and recording voice function of the smartphone do not work during a phone call linked to the Quantum application. Recording voice function(or recording voice application) may operate but CipherTM locks the microphone itself, the voice would not be recorded. When a regular phone call comes in from another party while on a secure call using CipherTM, there will be automatic refusal to the call coming. After the secure call ends, you can check missed calls and respond. Powered by EYL V1.2.2 CipherTM Registration and Bluetooth Connection 1. User registration and bluetooth connection Open CipherTM application and click buttons in order to activate camera: [setting user registration insert QR code] Scan QR code on the back of warranty card with camera and product information will be automatically entered. Functions of Each Menu of the Dedicated Application 1. Contact registration You can add contact information at [Recents / Contacts / Keypad] a tab at the bottom of the application. Select the device, register information and click register. (Required to agree to terms and conditions when registering) Open the application and turn on the power of CipherTM, they are automatically connected via bluetooth. 2. Check bluetooth connection Check the application status bar Check with device [Bluetooth disconnected] color gray You can add contact information by touching the buttons in order: [Recents select the person's contact info add(+) button register contact] You can add contact information by touching the buttons in order: [Contacts add(+) button register contact] [Bluetooth connected] color red [Bluetooth disconnected] Blue LED flickers [Bluetooth connected] Blue LED lights on You can add contact information by touching the buttons in order: [Keypad enter contact information Add Contact(text)] Names and Functions / Components Quantum Shieldz® CipherTM Device 5 9 Warranty Card 2 3 4 Microphone Speaker 1 6 7 8 USB Type-C Port 10 CipherTM exclusive earphone 11 USB Type-C Cable Power button Press the button for a while(more than 3.5 seconds) to turn the power on/off. When a secure call comes in, press the button briefly and you can answer the call. Volume(+) button Increases the volume during a call. (+) When you press the button briefly in standby mode, you can check the charge level of battery. Volume(-) button Decreases the volume during a call. (-) When you press the button briefly in standby mode, you can check the charge level of battery. Vibrate/silent mode button Turns the vibrate mode on/off when receiving a call. Q(Red LED) In standby mode, LED flickers. During a call, LED light is always on. Bluetooth status (Blue LED) Displays the status of connection between smartphone and CipherTM. LED flickers when disconnected, and LED keeps turned on when connected or in standy mode. Bluetooth status (Blue LED) Displays the level of battery charge and operation state. - When connected to power, it lights up according to the battery charge level. (From light off at 0%, the lights turns on sequentially per battery charge level, up to 100% full charge where the light turns off) - When you click the volume button, it lights up for 3.5 seconds depending on the battery charge level and then turns off. - While on a call, it flickers according to the battery charge level. - Power On/Off blinks sequentially. Power status (Red LED) When connected to USB Type-C port, it lights up. Warranty card Register CipherTM device with serial number and QRcode. Earphone for CipherTM Only the USB Type-C MONO earphones device can be used exclusively for CipherTM. These earphones are used for analog type only, not DAC built-in earphones for general use. USB Type-C cable The USB Type-C cable is for charging battery. During charging, the charging status and level of charge are displayed on LED of the device. 2-1. Making a call When the person you are trying to reach is in available status(CipherTM connected) When you open the application, you can find [Recents / Contacts / Keypad] tab at the bottom and you can make a call using this tab. You can check whether the person you are calling is available or not. If he/she is not available, you can make a forced call or send a request message. 2-2. Making a call When the person you are trying to reach is in unavailable status(CipherTM disconnected) When the person you are trying to call does not connect his/her smart phone to CipherTM, you can send a message(push alarm) or make a forced call. Later when the person connects CipherTM and turns up available, you can make a call. 3. Receiving a call When there is an incoming call, the recipient's smart phone(ring or vibrate) and CipherTM device(vibrate or silent) will ring. You can answer the call by pressing the dedicated application's call button or CipherTM device's power button. Answer the call Make a call by touching the buttons in order: [Recents/ Contacts touch the person you are calling call] Make a call by touching the buttons in order: [Keypad touch the person you are calling call] Send Connection Message Calling from [Quantum Kim]. Quantum Shieldz® CipherTM is required. CALL SEND CANCEL ACCEPT DECLINE [Call request(caller)'s screen] [The other party(Recipient)'s screen] Send a request for a call by touching the buttons in order: [Recents/ Contacts touch the contact info of the person you are trying to call send push alarm or call request] On keypad screen, you can try to call regardless of the recipient's connection status. When the recipient becomes available to receive the call, a note of incoming call is informed and the call will be on hold to be received. Answer the call CipherTM Device Dedicated Application This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. CipherTM's Dedicated Application Download and Install (for Android) Application exclusively for Quantum Shieldz® CipherTM Download and install the application to use CipherTM. You can download it from the Google Play Store on Android OS. (Search terms: Quantum Shieldz, Quantum Shieldz Cipher, QSC, etc.) Required permissions during installation must be allowed for stable use. (Allow access to bluetooth, location information, etc.) To use all the optimized functions of CipherTM, keep the application updated to the latest version. It is recommended to use smartphone with OS installed higher than Android version 8.1.0 (Oreo) for the application's normal operation. For more information and inquiries Company(EYL) Website : www.eylpartners.com Brand(Quantum Shieldz®) Website : www.quantumshieldz.com Product or business related inquiries quantum@eylpartners.com l TEL. (+82) 02-6993-7190