Instruction Manual for RAYSGEM models including: RC101M2G Smart Mirror, RC101M2G, Smart Mirror, Mirror
%product-title% – Conrad Electronic Suisse
raysgem RC101M2G Smart Mirror Touchscreen EEC: B (A - G) 25.4 cm (10 inch) 1200 x 1920 dpi 16:10 30 ms USB type A IPS L | Conrad.com
HNN D Anchor point LED LIGHT Anchor point F A2 Screw hole A1 Screw hole Mounting distance 360mm (Vertical installation) Recommend the drill size with 8mm diameter and 37mm depth. During installation, the screws must not come into contact with the metal partsor materials in the wall. Before installation: 1. Check the installation instruction to confirm the installation position and ensure there is sufficient space for the smart mirror. 2. The wall must be a solid wall, not a hollow wall, otherwise it will reduce the mounting strength. 3. There should be socket-outlet near the smart mirror and should be easily accessible. 4. During installation, the screws must not come into contact with the metal partsor materials in the wall to avoid short circuit and electric shock. Installation steps (Vertical installation): . Please locate the installation position on the wall. . Paste the installation instruction on the installation position. . Mark the position of A1, B1, C1, D, E on the wall with a pencil or other tools. . Drill a hole at A1, B1, C1, tap the plastic anchors into the wall, and tighten the screws. . The upper left corner of the smart mirror is consistent with D, and the upper right corneris consistent with E. Move the smart mirror slightly so that the slot is fastened to the screws. Mirror Wall Wall B2 Screw hole E Anchor point B1 Screw hole . Drill a hole at A2, B2, C2, tap the plastic anchors into the wall, and tighten the screws. . The upper left corner of the smart mirror is consistent with G, and the upper right corneris consistent with F. Move the smart mirror slightly so that the slot is fastened to the screws. Remarks: 1. During installing, please be careful to protect the mirrorfrom scratches or damage. 2. After the smart mirror is installed, please do not pull it down, lift it up, or shake it left and right. Mirror . Please locate the installation position on the wall. . Paste the installation instruction on the installation position. . Mark the position of A2, B2, C2, F, G on the wall with a pencil or other tools. Installation steps (Horizontal installation): LED LIGHT Remarks: 1. During installing, please be careful to protect the mirrorfrom scratches or damage. 2. After the smart mirror is installed, please do not pull it down, lift it up, or shake it left and right. LCD SCREENM2G-P LED LIGHT Mounting distance 500mm (Horizontal installation) Recommend the drill size with 8mm diameter and 37mm depth. During installation, the screws must not come into contact with the metal partsor materials in the wall. LCD SCREEN (M2G-L) Anchor point G C2 Screw hole C1 Screw hole LED LIGHT USB DC LED LIGHTAdobe PDF library 16.07 Adobe Illustrator(R) 24.0