Founder of Sparkular, Sparkular Machine Maker | Showven
User Manual for SHOWVEN models including: Sparkular Fall, Cold Spark Machine, Sparkular Fall Cold Spark Machine
Co2 Special Effects, Co2 Systems, Cold Spark Machine, Co2 Tank / Co2 Cylinder Information
》For convenient use, there are power supply cable and power supply ex-cable. Power Supply ex-ca-ble can achieve multiple devices connected, maximum cascade is 6pcs(BT04)/3pcs(BT05).
File Info : application/pdf, 8 Pages, 269.10KB
DocumentDocumentSPARKULAR FALL USER MANUAL V1.1 Showven Technologies Co.,Ltd. User Manual SPARKULAR FALL Please read this manual carefully before operating the product. This manual contains the warranty card, please keep it well. Safety Considerations vNever touch the nozzle of SPARKULAR TRIPLE, danger of getting burnt. vNever touch the sparks which shooting out from the nozzle. vUnauthorized repair are prohibited, it may cause serious incident. vKeep SPARKULAR FALL dry and do NOT use in rain or snow. vMake sure lid of feeding hopper are well covered when use Sparkular Fall. Accidentally Burning of Composite Ti can only use sands to extinguish. Composite Ti should keep away from moisture and stored in a dry sealed environment. vKeep audience and flammable material at a minimum distance of 3m from SPARKULAR FALL and it's drop sparks. Make sure sparks shoot out from Sparkular FALL can NOT touch any objects. vEnsure that children, animals and unauthorized persons don't have access to the SPARKULAR FALL. vClear material for Sparkular Fall is necessary both before the show and after the show, to clear the Composite Ti remains in the pipe. Check whether there are Composite Ti aggregate in the nozzle after each show, if any, please clean it up, or it will affect the shooting effect or even damage Sparkular Fall. vThe Sparkular FALL power supply cable (sparkular fall power supply EX-cable) maximum allowed cascade for Sparkular Fall is 6pcs (BT04)/ 3pcs (BT05), exceeded connecting may result in damage or even cause fire. vFor better heat dissipation, block the air intake and air outlet is prohibited. vCover of nozzle of Sparkular Fall is prohibited. Sparkular Fall Model No.BT04/BT05 Parameter Dimension Weight Input Working Power Working Temperature Casing Fountain Height Interface Hopper capacity Hanger Diam 192×208×192mm 6kg 200-240VAC, 50/60Hz (BT04) 100-120VAC, 50/60Hz (BT05) 400w -10~ 50 Auti-Flaming ABS 2m ~ 7mDepend on different type of Composite Ti Double DMX input interfaces, Double AC power interfaces 280g 40-60mm 1 Operating Panel: LCD information display area, showing operate menu and working status of machine. Light emitting diode display area READYAfter turning on machine, it will automatically preheat around 5 minutes, when the "READY" green light turns from flashing into long on, indicates that the machine is ready to work DMX Flashing shows that DMX signal is connected, otherwise is without signal FAULTWhen any malfunction , the light turns on HEAT When the machine is heating, signal light turns on Bottom Indication Light OffSparking or Not in preheating Quick FlashingPreheating Long onPreheated Slow FlashingError warning Control button area MENUShort press to switch interface, press for 3 seconds can switch to the advanced setup interface. -Parameters down +Parameters up. ENTERConfirm and save parameters. 2 Radio frequency identification area vComposite Ti with RFID card, swiping cards used to identify parameters and types of granules. vPlease note that granules RFID card can increase the single machine specific working time. The card is disposable,one card can only use one time. Interface Main interface First lineDisplay DMX address is "1". Second line: Display the present inner core temperature and the temperature progress bar; displays remianing time is 7 minutes and 24 seconds. Error informations display table Error Informations Explanation E0 System IC System error. E2 Temp. Sensor Temperature sensor was damaged. E3 P Temp. Over Chassis temperature is too high to shut down. E4 Time Remain E5 K Temp. Over E6 Heat Fail Insufficient granules or remaining time, please swiping time card. Inner core temperature is too high to shut down Heating failed. Setting interface Press "MENU" to enter the Setting interface, press the "MENU" button to enter different options until you return to the main interface. Options Range Explanation Set DMX Address 1-512 Set the DMX address,machine become a wireless host and can send out DMX signal when its address is "1++". Wireless Control ON/OFF Wireless function switch,you can match code when shows "ON" Manual Fountain ON/OFF Manual fountain switch , for testing purpose only. Advanced menu Press "MENU" 3 seconds to enter the advanced setup interface, press MENU key to enter different options, press MENU till 3 seconds to return to the main interface. Options Range Explanation Set Temperature 500-610 Setup inner Core temperature. Auto Heat ON/OFF Auto preheat function switch after turning on machine. Density 70-100 Adjust the sparks density. Mode Selection Factory Mode/User Mode Factory Mode is factory debugging User Mode is using mode. mode, Default Parameter Press "ENTER" to restore all parameters to the factory settings. 3 Use: Power cable connection vFor convenient use, there are power supply cable and power supply ex-cable. Power Supply ex-cable can achieve multiple devices connected, maximum cascade is 6pcs(BT04)/3pcs(BT05). All power plugs are industrial plug with lock, it need to toggle snap and rotate when using. Host controller mode Using the host controller to moniter the working status of Sparkular Fallto achieve multiple dynamic effects and stable controlling.Sparkular Fall has high/low levelthe height settings 1-5 in host controller is low level,6-10 is high level.Please see the details in host controller manual. Cable DMX mode When using the DMX controller, the system takes 2 channels The First channel 0-15 16-135 136-255 The second channel 60-80 20-40 0-10 240-255 Functions Fountain OFF Low Level Fountain ON High Level Fountain ON Functions Clear Material Emergency Stop Pre-heat OFFcDisable in Auto-heat Pre-heat ONcDisable in Auto-heat Wireless remote control mode vIf the remote control cannot work, please check whether wireless function was turn on. Press MENU to switch to wireless control setting , menu is set to "ON" , press "ENTER". In this interface, you can also match code with remote controller. vSparkular Fall can controlled by both DMX and remote controller, when there are DMX signal input, wireless remote controller will not work. vWhen using remote controller you need to pull out the antenna. vAfter pressing"set"button,press"3 on"button immediately to change to low levelpress"3 off"to change to high level. 4 1 ON Address "1" ON 1 OFF Address "1" OFF 2 ON 3 ON Set 5 S Address "3" ON Address "5" ON Low Level When use different remote controller Change Levels All Starts 5 seconds 2 OFF 3 OFF CLEAR 15 S Address "3" OFF Address "5" OFF High Level Automatically clean material for 3 seconds Start Pre-heat All Starts 15 seconds 30 S All Starts 30 seconds OFF All stop Attention vThe first group machines correspond to DMX address "1", the second group DMX address is "3", the third DMX address is "5", remote controller controls 3 groups of machines. You can also set all Sparkular Fall address as "1". vWhen the lamp is not lit or becomes weak on the remote controller, please replace the battery. It is better to take battery out when transporting to prevent consumption of battery power by unmeant press of button. Battery model 12V 23A vWhen the machine is occasionally not working, may be caused by interference, please press the start button again. vWireless control is easily influenced by interference, it suggests to stay as close to machine as possible when use remote controller, and machines cannot use metal shielding. Wireless host Sparkular Fall mode (requires communication cables): In occasion of strong interference, using the wireless host can avoid interference, ensure stable control. Enter into Set DMX Address option menu,press "-"when the DMX address is "1"to set the first unit of Sparkular Fall's DMX address into "1++", this machine address is "1", but it can also output DMX signal and turns into wireless host Sparkular Fall. Use communication cables to connect all the Sparkular Fall, the host Sparkular Fall will receive the signal from remote controller and transfer to all other Sparkular Fall via communication cables to realize stable signal transmission. AttentionIn this mode,please don't connect to other controll mode to prevent from communication disorder. Hanger and Lifting Ring nstallation Method Consumptive Material Type Options Instruction HC8200 Fall length (Low Level) Fall length (High Level) MEDIUM 2m 3m LARGE 3m 4m LARGE-ú 4m 5m LARGE-û 5m 7m 5 Warranty Instructions Sincere thanks for your choosing our products, you will receive quality service from us. The product warranty period is one year. If there is any quality problems, we can exchangea brand new same model machine to you within seven days after receiving the product. We will offer free of charge maintenance service for machines which with hardware malfunction (except for the instrument damage caused by human factors) in warrantyperiod. Please don't repair machine without factory permission. ®Below situations NOT included in warranty service: 1.Damage caused by improper transportation, usage, management, and maintenance, or damage caused by human factors; 2.Disassemble, modify or repair products without Showven's permission; 3.Damage caused by external reasons (lightning strike, power supply etc); 4.Damage caused by improper installation or use; For product damage not included in warranty range, we can provide paid service. Invoice and warranty card are necessary when asking for maintenance service from SHOWVEN. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Product Name Purchase Date: Contact Number: Address: Customer Feedback Information: Actual malfunction: Maintenance details: Maintenance person: Warranty card Serial NO. Maintenance Date: 6 Showven Technologies Co., Ltd Add: Building B1, Changsha E Center No.18, Xiangtai Road, Liuyang Economic Development Zone, Changsha City, 410300, Hunan Province, P.R.China. Tel: +86-731-83833068 Web: www.showven.cn E-mail: info@showven.cn