ASSEMBLY INSTRUCTION

Parts Identification

• Part A: Wall Mounting Bracket (×1)
• Part B: Shelf Support Arms (×3)
• Part C: Shelf Boards (×3)

Hardware

• Hardware 1: Small Screws (×4)
• Hardware 2: Wall Plugs (×4)
• Hardware 3: Long Screws (×6)
• Hardware 4: Screws (×3)
• Hardware 5: Screwdriver (×1)

Installation Steps

Step 1: Attach Support Arms to Bracket

Assemble the main components by screwing parts A (Wall Bracket) and B (Support Arms) together using the screwdriver (Hardware 5).

Step 2: Attach Shelf Boards

Attach the shelf boards (C) to the support arms (B) by screwing them together using the screwdriver (Hardware 5).

Step 3: Mark Wall Location

Hold the assembled shelf unit against the wall and mark the desired locations for drilling.

Step 4: Drill Holes and Insert Wall Plugs

Drill holes into the wall at the marked positions. Insert the wall plugs (Hardware 2) into the drilled holes. A hammer may be used to gently tap them into place.

Step 5: Mount Shelf Unit to Wall

Align the wall mounting bracket (A) with the wall plugs. Use the screwdriver (Hardware 5) to screw the long screws (Hardware 3) through the bracket and into the expansion tubes (wall plugs) to securely mount the shelf.