HOSS 6-Throw Compressor Frame - Outline Drawing
This document presents the outline drawing and key specifications for the HOSS 6-Throw compressor frame, model G15067. It details the physical dimensions, component locations, and connection points necessary for understanding the unit's configuration.
Main Assembly Views
The drawing displays multiple views of the compressor frame, including:
- A primary elevation view showing the overall length and height, with detailed dimensions for cylinder spacing and component placement.
- A side view illustrating the drive end and pump end details.
- Cross-sectional views (e.g., View A-A) providing internal component layout and connection port details.
Dimensions are provided in inches unless otherwise specified. Key components are labeled with reference numbers.
Component Callouts and Specifications
The following components are identified and specified in the drawing:
| Ref. | Description |
|---|---|
| (1) | OIL PRESSURE REGULATION VALVE - FACTORY SET AT 60 PSIG |
| (2) | 1.500"-8UN-3B THD, 2.25 FULL THD. LIFTING LUG (1 PER THROW) |
| (3) | FRAME OIL LEVEL INDICATOR |
| (4) | 2.000" NPT FRAME OIL DRAIN (PLUGGED) |
| (5) | FRAME OIL HEATER (IF REQUIRED) |
| (6) | 2.500" 150 RF FLANGE FRAME OIL INLET FROM COOLER |
| (7) | 2.500" 150 RF FLG FRAME OIL OUTLET TO COOLER |
| (8) | .750" NPT AUXILIARY LUBE CONN (PLUGGED) |
| (9) | LEVELING SCREWS 1.000"-8UNC-3B THD |
| (10) | OIL FILTER DIFFERENTIAL PRESSURE INDICATOR |
| (11) | .750" NPT OIL LEVEL CONTROL VENT (PLUGGED) |
| (12) | .750" NPT REQUIRED FRAME OIL LEVEL CONTROLLER |
| (13) | 2.000" NPT FRAME OIL FILLER |
| (14) | OIL FILTER VENT/ PURGE CONN |
| (15) | BICERA DOOR (IF REQUIRED BY CLIENT) |
| (16) | .750" NPT RTD 6 HOLES (IF REQUIRED) |
| (17) | .750" NPT OIL FILTER DRAIN PORT CONN |
| (18) | .750" NPT MAIN BEARING HEADER OIL PRESSURE CONN (CUSTOMER CONN) |
| (19) | 2.000" NPT DRY-SUMP CONNECTION (PLUGGED) |
| (20) | .500" NPT THD LUBRICATOR VENT/OVERFLOW (IF REQUIRED) |
| (21) | LUBRICATOR OIL SUPPLY (.25 NPT) |
| (22) | FRAME OIL BREATHER |
General Information
Approximate Weight: 21,900 LBS
Specification Compliance: ASME Y14.5
Drawing Revisions: The document includes revision history detailing changes made to the drawing, including dimension updates and component additions, with dates and approvers.