Invacare Storm Torque RX20 Power Wheelchair

Order Information

Please fill in all required information for quoting or ordering.

Required Measurements

To ensure accurate configuration, please provide the following measurements:

Specifications

(1) Actual driving range and speed may vary due to factors such as user weight, type and grade of terrain, battery condition & charge level; type and condition of the drive wheels, and variations in the drive and control systems.

Invacare Power Bases

Prices subject to change without notice.

NEW!

Storm Torque RX20 Base for Captain's Seat (SRX-20C)

HCPCS code K0849

Price: $8,290

Storm Torque RX20 Base with Solid Seat Pan (SRX-20S)

HCPCS code K0848

Price: $8,290

NEW Features:

• Enhanced Front Caster Housing and Bearings
• New Front Caster Design
• Improved double-sided Front Forks
• Upgraded Rear Suspension
• Optimized Linx Parameters

Configuration Options

Seat to Floor Height (inches)

Note: RSLOW / RSLOW-S has a $250 upcharge and is not available on Narrow Base.

Seat Style

• Semi-Recline (35°) Captain's Seat (SEMIR): STD
• Semi-Recline (35°) with Solid Seat (SEMIRB): $100

Seat Cover

• Black Slip Cover (BSC): $295 (Includes seat, back, and headrest cover)

User Weight Limits

• Weight Capacity up to 250 lbs (UW250): STD (Required for Narrow Frame Base)
• Weight Capacity up to 300 lbs (U300): STD

Base Width

• Narrow Base 22.4" (NARROWFRM): N/C (Uses 2 M50 Batteries. User weight limited to 250 lbs.)
• Standard Base 24.4" (STDFRM): N/C (Uses 2 Group 24 Gel Batteries.)

Performance Motors

• Performance Motors - 7.5 mph (HSMTR): $1,400 (1, 2, 3)

(1) Extended high speed use on rugged terrain is not recommended. (2) Performance/High Speed Motors may have less torque and may have less range than standard speed motors. (3) Not available on Narrow Base.

Caster Option

• 8" x 2.5" Black Ribbed Casters w/ Solid Inlay (AB1228-3): N/C

Installation of Batteries

• Group 50 Battery (ea) (M50-12 SLD M MK): $245 (HCPCS code E2361)
• Group 24 Gel Battery (ea) (M24 SLD G FT MK): $365 (HCPCS code E2363)

Battery Charger Option

• 110 Volt Battery Charger (110CHARGER): N/C
• Omit Battery Charger (L8900): ($80)

Frame Finish

• Obsidian Black (170P): N/C
• Ruby Red (171P): N/C
• Peacock Blue (172P): N/C
• Pink Flamingo (173P): N/C
• Purple Passion (174P): N/C
• Denim Navy (175P): N/C
• Lime Twist (176P): N/C
• Arctic Blue (177P): N/C

Rim Insert Colors

• Obsidian Black (170PR): N/C
• Ruby Red (171PR): N/C
• Peacock Blue (172PR): N/C
• Pink Flamingo (173PR): N/C
• Purple Passion (174PR): N/C
• Denim Navy (175PR): N/C
• Lime Twist (176PR): N/C
• Arctic Blue (177PR): N/C
• Banana Split (178PR): N/C
• Orange Marmalade (179PR): N/C
• Morning Mist (180PR): N/C

Elevating Seat

• Elevate lift 12" (ESM12C): $2,995 (Weight capacity up to 300lbs)

Note: Must order STDFRM Battery Tray Type. Not available on Narrow base.

Transport Tie Down

• Wheelchair Transport Brackets (TRBKTS): STD (For unoccupied use only)

Tire Options

• 14" x 3" Black Tire with Gel Foam Inserts (AB1431-3): STD
• 14" x 3" Black Tire - Pneumatic Tire (AB1430-3): N/C

Reduced Drive for Elevating Seat

• Reduced Drive for Elevating Seat (RDE): $400 (1)

(1) If reduced drive is not selected, the system will be in drive lock-out when elevated.

Electronics for Elevating Seat

• Single Function Electronics (SFCB): STD
• Single/Dual Function Drive Control (SFCBA): $1,795 (HCPCS code E2310)

Select Switch for SFCB:

• Single Push Button (SPBSO)
• Single Toggle Switch (STO)

Additional Switch for Power Seating

• Single Push Button (SPBSA): $150
• Single Toggle Switch (STA): $150
• ASL Pulse Mechanical Switch - Red (ASL320R): $125
• ASL Pulse Mechanical Switch - Green (ASL320G): $125
• ASL Pulse Mechanical Switch - Black (ASL320BK): $125
• Stealth Egg Switch - Green (SESG): $135
• Stealth Egg Switch - Black (SESB): $135

Mounting for Power Seating Switch

• Left Side (Armpad) (ESML)
• Right Side (Armpad) (ESMR)
• Joystick Left (Mounts to Joystick Bracket) (ESMJL)
• Joystick Right (Mounts to Joystick Bracket) (ESMJR)
• Do not mount (ESMD)

Seat Width Setting

• 18" Wide (Actual Width 17.7" Solid / 19" Captain) (W18): N/C
• 20" Wide (Actual Width 18.5" Solid / 20" Captain) (W20): N/C
• 22" Wide (Actual Width 20.5" Solid / 22" Captain) (W22): N/C

Seat Depth Setting

• 16" Deep (D16): N/C
• 17" Deep (D17): N/C
• 18" Deep (D18): N/C
• 19" Deep (D19): N/C
• 20" Deep (D20): N/C
• 21" Deep (D21): N/C

Seat Width and Depth Compatibility Chart:

Non-Expandable Single Drive Joysticks

• LED Non-Expandable Remote (REM215N): N/C

Expandable Joysticks and Controller

• Expandable Controller (EXPC): $700 (HCPCS code E2377)
• Harness Required for Expandable System (PWH): $450 (HCPCS code E2313)
• LiNX G-TRAC Module (GTRAC-LX): $995 (HCPCS code K0108)
• LED Expandable Remote with Lights (REM216N): N/C (1)

(1) Must choose EXPC Expandable Controller and PWH Harness.

Mounting for Joysticks

• Fixed Joystick Mounting - Right (FR): STD
• Fixed Joystick Mounting - Left (FL): STD
• Maxx Resolve Swing-Away Joystick Mount (Right Hand) (MRR): $395 (HCPCS code E1032)
• Maxx Resolve Swing-Away Joystick Mount (Left Hand) (MRL): $395 (HCPCS code E1032)
• Motion Height Adjustable Swing-Away Quad Link (Right Hand) (SAQR): $235 (HCPCS code E1032)
• Motion Height Adjustable Swing-Away Quad Link (Left Hand) (SAQL): $235 (HCPCS code E1032)

LiNX Electronic Accessories

• LiNX Access Key (LAK): $100 (1) (Required for programming)
• Motion Dual USB Charger (MUSB): N/C

Joystick Tops

• Bodypoint U Shaped Handle 3" (PC101A): $120 (HCPCS code E2323)
• Bodypoint U Shaped Handle 4" (PC102A): $120 (HCPCS code E2323)
• Bodypoint Rubber Dome (PC107A): $120 (HCPCS code E2323)
• Grooved Mushroom Joystick Handle (PC110A): $120 (HCPCS code E2323)

(1) To remove/disengage the joystick knob from the REM400 Remote, pull straight up on the joystick (DO NOT TWIST) to avoid damage and potential warranty voiding.

Lap Belts

• Push Button Style Lap Belt, Length 48" (BELT48): STD
• Push Button Style Lap Belt, Length 60" (BELT60): N/C
• Push Button Style Lap Belt, Length 71" (BELT71): N/C
• Bodypoint Padded Lap Belt 2 Point (PLB2): $190 (1)
• Bodypoint Padded Lap Belt 4 Point (PLB4): $235 (1)

(1) 67" length only option.

Arm Rests

• Left Full Length, Adjustable Height (LVAHF): $115 (HCPCS code E0973)
• Right Full Length, Adjustable Height (RVAHF): $115 (HCPCS code E0973)

REM400 Remote

• Color 3.5" Touch Screen Remote (REM400): $1,000 (1)
• Toggle Kit for REM400 (SW400TGL): $395 (2)

(1) Must choose EXPC Expandable Controller and PWH Harness. (2) Adds 2 toggle switches to REM400.

Matrx Seat Cushions - For Solid Seat Systems

Prices subject to change without notice.

Matrx PS Seat Cushion

• 14" - 20" wide/reversable cover (PS1816, PS1818, PS2018, PS2020): $345 (HCPCS code E2605)
• 21"-22" wide (PS2218, PS2220): $545 (HCPCS code E2606)

Matrx PSP Seat Cushion

• 14" - 20" wide/reversable cover (PSP1816, PSP1818, PSP2018, PSP2020): $395 (HCPCS code E2607)
• 21"-22" wide (PSP2218, PSP2220): $595 (HCPCS code E2608)

Matrx Vi Seat Cushion

• 14" - 20" wide (MA1816-VI, MA1818-VI, MA2018-VI, MA2020-VI): $425 (HCPCS code E2607)
• 21" - 22" wide (MA2218-VI, MA2220-VI): $475 (HCPCS code E2608)

Matrx Libra Seat Cushion

• 14" - 20" wide (LC1816, LC1818, LC2018, LC2020): $485 (HCPCS code E2624)
• 21" wide (LC2218, LC2220): $525 (HCPCS code E2624)

Matrx Libra Adjust Seat Cushion

• 14" - 20" wide (LC1816-ADJ, LC1818-ADJ, LC2018-ADJ, LC2020-ADJ): $625 (HCPCS code E2624)
• 22" deep (LC2218-ADJ, LC2220-ADJ C): $735 (HCPCS code E2624)

Matrx Multi Cushion

• 14" - 20" wide w/reversable cover (MM1816, MM1818, MM2018, MM2020): $445 (HCPCS code E2607)
• 22" wide w/reversable cover (MM2218, MM2220, MM2222): $595 (HCPCS code E2608)

Note: Seat pan to footplate measurements shown are for Solid Seat systems. Captain Seat measurements are an additional 4".

(1) 3" ground clearance required. (2) Fixed Center Mount will be set at factory setting to prevent caster interference.

"ON-CHAIR" Cushion Credit (OCCC): ($90) (1)

(1) Not available on Matrx PS or PSP Cushions.

Front Rigging Options

Standard Front Rigging

• Fixed Center Mount Platform (FCMP): N/C (1, 2)
• Rubber Coated Footplate (10.5" W x 10") (FIFPN): N/C

Select seat pan to footplate:

• 10.25" - 14.25" (FSPTF3): N/C
• 14.25" - 20.25" (FSPTF4): N/C

(1) 3" ground clearance required. (2) Fixed Center Mount will be set at factory seating to prevent caster interference.

Manual Elevating Center Mount Legrest

• Manual Elevating Center Mount Legrest with Plantar Flex (MECML): $595

Select legrest set up position:

• Set at 90° (elevating range 90-40°) (90SU): STD

Rubber Coated Footplate:

• Rubber Coated Footplate 10.5" W x 10" D (MRCPN): $165

Select seat pan to footplate for One Piece Foot Plate:

• 12.75" - 16.25" (CSPTF1): N/C
• 15.25" - 20.25" (CSPTF2): N/C

Individual Footplates:

• Small - (5" x 7.5" deep) - Left (IFSL): $165
• Small - (5" x 7.5" deep) - Right (IFSR): $165
• Medium - (5.5" x 9.5" deep) - Left (IFML): $165
• Medium - (5.5" x 9.5" deep) - Right (IFMR): $165
• Large - (6" x 11.5" deep) - Left (IFLL): $165
• Large - (6" x 11.5" deep) - Right (IFLR): $165

Select seat pan to footplate for Individual Footplates:

• 10"- 15" (CSPTF3): N/C
• 12.5" - 19.5" (CSPTF4): N/C

Optional:

• Individual calf pads (CICP): $200

Maxx Style Front Rigging

• Maxx Style Fixed Center Mount Foot Platform (MSFCMFP): $395 (1, 2)
• Comes with a rubber coated footplate 10.5" W x 10" D (MIFPN): N/C
• Comes standard with individual calf pads (MICP): N/C

Select seat pan to footplate:

• 10.25" - 14.25" (MSPTF3): N/C
• 14.25" -20.25" (MSPTF14): N/C

(1) 3" ground clearance required. (2) Fixed Center Mount will be set at factory seating to prevent castor interference.

Foot Platform Options

• Small Foot Platform (12"w x 8.5"d) (SFFP): $180
• Medium Platform (12"w x10.75"d) (MFFP): $180
• Large Platform (14.5"w x13"d) (LFFP): $250
• Extra Large Platform (17"w x13"d) (XLFFP): $250
• Extra Extra Large Platform (21"w x13"d) (XXLFFP): $250

(1) May need to adjust leg position to avoid interference with front casters.

Accessories

• X-Grip Phone Holder (PH): $95
• Universal Cup Holder (UCH): $35 (1)
• Cane and Crutch Holder (CSCC): $395
• Non-Articulating O2 Gas Holder (CSO2): $250
• Flag Holder (CFH): $65
• Rear View Mirror Right Mounted (CRVMR): $45
• Rear View Mirror Left Mounted (CRVML): $45
• Captain Seat Wheelchair Cover (TAG571850): $105
• Accessory Mount with Clip (AMC): $50
• Captain Seat Walker Holder (CSWH): $200 (2)

(1) Not available on the joystick side. (2) Maximum load is 20 lbs.

Military Decal

• Army Decal 3" Diameter (DECALA): $50
• Air Force Decal 3" Diameter (DECALAF): $50
• Navy Decal 3" Diameter (DECALN): $50
• Marines Decal 3" Diameter (DECALM): $50

(1) Comes uninstalled off chair.

Order Summary

RETAIL $ _____________________________________________________

SUBMIT PRINT FORM SAVE CLEAR FORM