Core Eclipse Room Controller: Quick Start Guide

Model: CR-ECP-04-KNX-XXX

Technical Specifications

Concept	Description
Processor	Arm Cortex-A7 900MHz, 512 MB DDR3 RAM, Embedded Linux Operating System
Display	IPS TFT, 4" - 720px X 720px, 400 cd/m2, HD Display
Sensors	Temperature & Humidity, CO2, Proximity & Light
Dimensions	86mm X 86mm X 11mm
Casing Material	Aluminium, Brass and Stainless Steel depending on the finish selection
Power	12-30 VDC - via KNX Auxiliary Power Supply or separate PS
Consumption	< 70 mA from KNX Auxiliary Power Supply, < 5 mA from KNX Bus-line
Connectivity	KNX-TP
Programming Tool	ETS
KNX Figures	Max. Page: 12, Max. Control Element: 64
Installation	German IEC/EN 60670 In wall Box

Package Contents

Core Eclipse Room Controller
Screws
Metal Mounting Support
Connectors

Components

The device is a square unit. The front displays a screen (1) at the top. Below the screen are the CO2 sensor (2), followed by the Temperature and Humidity sensor (3), and then the Proximity sensor (5). An SD Card Slot (4) is also visible on the front. The side/bottom view shows the device's depth, mounting clips (9), a Power Connector (6) for 12-30V, a KNX Connector (8), and a KNX Programming Button (7).

1. HD Display: The main screen interface.
2. Position of CO2 Sensor: Location of the carbon dioxide sensor.
3. Position of Temperature and Humidity Sensor: Location of the environmental sensors.
4. SD Card Slot: For potential storage expansion or firmware updates.
5. Proximity sensor: Detects presence.
6. Power Connector (12V-30V): Terminal for external power supply.
7. KNX Programming Button: Button used to enter programming mode.
8. KNX Connector: Terminal for the KNX bus connection.
9. Mounting Clips: Integrated clips for securing the device to the wall box.

Safety Remarks

Warnings

? Installation, electrical connection, configuration, and commissioning of the device must only be carried out by qualified personnel, in compliance with applicable technical standards and laws of the respective countries.
? The electrical connection of the device can only be carried out by qualified personnel. Incorrect installation may result in electric shock or fire. Ensure the power supply is turned off before making electrical connections.
❌ Do not connect to main voltage (230V AC) to the power connector or KNX connector.
❌ Opening the housing of the device immediately voids the warranty period.
? In case of tampering, compliance with essential requirements of applicable directives is no longer guaranteed.
? To clean, use a dry cloth. Avoid solvents or aggressive substances.
? Contact with fluids to the plate and socket must be avoided.
?️ The device cannot be installed close to heat sources (radiators, household appliances) or in direct sunlight.
? The device should preferably be installed on an internal wall at a height of 1.5m and at least 0.3m from doors.

Mounting

The mounting process involves several steps illustrated by diagrams:

Mounting Support: A metal mounting support is attached to the wall using screws (M3x15 mm). ⚠️ Do not overtighten the screw.
Cable Connection: The power cable (12-30V) and KNX cable are connected to the device, ensuring correct polarity.
Alignment: The device is aligned with the lower clips on the mounted support.
Securing: The top clips are attached.
Final Insertion: The device is pressed into place using both hands on the sides. ⚠️ Pushing the device straight into the clips might cause damage.

Commissioning

Configuration and commissioning require the use of ETS4 or later releases, performed according to the building automation system design by a qualified planner.

For device parameter configuration, load the corresponding application program or the whole Core product database in the ETS program. Refer to the application manual on www.core.com.tr for detailed information.
Commissioning requires:
- Making electrical connections as described above.
- Turning on the bus power supply.
- Switching the device operation to programming mode (alternatively, use the settings menu by activating KNX programming).
- Downloading the physical address and configuration using the ETS program.
After download, the device returns to normal mode.
The bus device is now programmed and ready for use.

	Core Product Catalog 2023: Smart Home & Building Automation Technologies Explore the Core 2023 Product Catalog featuring innovative KNX-based smart home solutions, including Eclipse Room Controllers, Touch Panels, Switches, and AC Gateways for advanced building automation.
	Core Mitsubishi Heavy VRF & FD Systems Gateway CR-CG-MHI-KNX-01 Quick Start Guide This Quick Start Guide provides essential information for installing and configuring the Core Mitsubishi Heavy VRF & FD Systems Gateway (CR-CG-MHI-KNX-01). It covers technical specifications, component identification, connection procedures to AC units and KNX bus, and commissioning steps using ETS software.
	Core Eclipse Push-Button Switch R-ECS-86-KNX-THCO2 Quick Start Guide Quick start guide for the Core Eclipse Push-Button Switch (R-ECS-86-KNX-THCO2), detailing technical specifications, package contents, dimensional drawing, safety remarks, mounting instructions, and commissioning procedures for KNX smart home systems.
	Core Surface 1.1 8" Touch Panel Quick Start Guide A quick start guide for the Core Surface 1.1 8" Touch Panel, detailing its technical specifications, components, safety remarks, mounting instructions, and commissioning process.
	Core Samsung NASA Gateway Quick Start Guide \| KNX Integration Quick start guide for the Core Samsung NASA KNX Gateway (CR-CG-SMG-KNX-01). Learn about installation, connection, and commissioning for seamless integration with Samsung air conditioners and KNX systems.
	Core Surface Switch Series: Premium KNX Smart Home Solutions Discover the Core Surface Switch Series, a modular KNX smart home system featuring elegant design, premium finishes, and advanced technology for exclusive living spaces.
	CORE K902 Keyboard Technical Specifications and Design Detailed technical specifications and design information for the CORE K902 keyboard, including dimensions, color specifications, and FCC compliance.
	CORE 12 Person Instant Cabin Tent - 18 x 10 Setup and Care Guide A comprehensive guide for setting up, using, and maintaining the CORE 12 Person Instant Cabin Tent - 18 x 10. Includes setup instructions, frequently asked questions, warnings, and warranty information.