Instruction Manual for JONATHAN Y models including: JYL7120A, JYL7120A 38.75 Inch Black Modern Bohemian Iron Linear Integrated LED Pendant, 38.75 Inch Black Modern Bohemian Iron Linear Integrated LED Pendant, Black Modern Bohemian Iron Linear Integrated LED Pendant, Modern Bohemian Iron Linear Integrated LED Pendant, Bohemian Iron Linear Integrated LED Pendant, Iron Linear Integrated LED Pendant, Linear Integrated LED Pendant, Integrated LED Pendant, LED Pendant, Pendant
JONATHAN Y JYL7120A 840011445311 0840011445311 1008221581
WARNING WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. CARE AND MAINTENANCE To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slighly damperned clean clorth (use clean water, never a solvent) to wipe the interior surface of the fixture. Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully. NOTICE & IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation * The external flexible cable or cord of this lamp cannot be replaced If the cord is damaged, the lamp shall be destroyed Model#:JYL7120A Product Dimensions:38.75"Lx11.75"Wx12-60"H Part List and Hardware List PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY A wire connector 3X E ground screw 1X mounting B bracket 1X F mounting screw 2X C machine screw 2X G the metal plate 2X D canopy 1X 12 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes. 1. Fix the mounting bracket(B) to the outlet box with machine screw(F). 2. Make wire connections, with wire connectors(A), following the reference chart listed below. Connect, Hot, Black or Red Outlet Supply Wire to: Black * Parallel Cord (round & smooth) Clear, Brown, Gold or Black without Tracer (colored stripes) Insulated Wire (not green) with copper metal conductor Connect, Neutral, White Outlet Supply Wire to: White * Parallel Cord (square & ridged) Clear, Brown, Gold or Black with Tracer (colored stripes) Insulated Wire (not green) with Silver metal conductor A E G B F C D *Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. ) Grounding Instructions: a) For installation in the United States: Wrap ground wire from outlet box around green ground screw(E) on mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector. b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding screw on mounting bracket. Tighten ground screw. 3. Carefully remove packaging from fixture, adjust wire length to desired mounting height, fix the canopy(D) to bracket(B) using machine screw(C). ENJOY YOUR LAMP 22