Motorola MOTO BUDS-S ANC Quick Start Guide
Brand: Motorola
Model: MOTO BUDS-S ANC
Product Overview
This guide provides essential information for setting up and using your Motorola MOTO BUDS-S ANC wireless earbuds.
Key Specifications:
- Model: MOTO BUDS-S ANC
- Frequency Band: 2.402 – 2.480 GHz
- Maximum RF power: < 10dBm
- Working Temperature: -10°C – 45°C
- FCC ID: 2ARRB-MBANC
- IC: 20353-MBANC
1. Charging
Fully charge the earbuds before first use. The device can be powered through a Type-C port from any CE compliant power source that implements the European interface as requested by EN 301 489-52.
Visual Description: Image shows the charging case with earbuds inside, and a Type-C charging port.
2. Pairing
Ensure both earbuds are inside the charging case with the lid closed. Then, open the lid. The earbuds will flash blue and red, indicating they are in pairing mode.
On your smartphone, navigate to the Bluetooth menu and select "MOTO BUDS-S ANC" to connect.
3. Fitting
To optimize the best fit and audio experience, it is recommended to try each of the different earbud sizes provided.
Insert the MOTO BUDS into your ear and rotate them until they fit comfortably.
Visual Description: Image shows earbuds and various sizes of ear tips.
4. Operation
Button Functions
The earbuds feature a Multi-Function Button (MFB) on each earbud for control.
Additional Operations
- Factory Reset: Switch off both earbuds, then hold both MFB buttons for 5 seconds until the indicator shows RED & BLUE. Then, press the MFB button rapidly 4 times.
- Reject a call: Press and hold the MFB button for 2 seconds.
- Voice command (Alexa): Press and hold the MFB button for 2 seconds (Android) or perform a single tap on the MFB button (iOS).
ANC and Transparency Mode Control
To toggle between Active Noise Cancellation (ANC) ON, Transparent mode, and ANC OFF, double-press the MFB button on the Left earbud (L Bud).
- This function works whether the earbuds are idle or playing music.
LED Indicator Status
The LED indicator on the earbuds provides information about their status:
| Status | LED Indicator |
|---|---|
| Pairing | Red-blue flash |
| Standby | Blue flash |
| Charging | Red steady |
| Fully charged | Off |
| Battery low | Red flash |
| ANC ON | White steady |
Visual Description: Diagrams illustrate button press sequences and LED color indications for various states.
Compliance and Declarations
UK Declaration of Conformity:
Hereby, MZGW declares that this product is in compliance with the requirements for UKCA marking. The Declaration of Conformity can be obtained at motorolasound.com.
Contact Information:
- A.I.&E., Adriaan Mulderweg 9-11, 5657 EM Eindhoven, The Netherlands.
- Edco UK Ltd, 1st Floor, Two Chamberlain Square, Birmingham, B3 3AX, UK.
