DLS – audio for life
User Manual for DLS models including: CRPP-VO1.6CX Volvo Adapted Coaxial Speaker, CRPP-VO1.6CX, Volvo Adapted Coaxial Speaker, Adapted Coaxial Speaker, Coaxial Speaker, Speaker
2-полосная коаксиальная акустика DLS Cruise CRPP-VO1.6CX | Характеристики DLS Cruise CRPP-VO1.6CX | Отзывы DLS Cruise CRPP-VO1.6CX
DLS Cruise CRPP-VO1.6CX - Fanatic Audio lta Tuotteen käyttöohje PDF-tiedostona
DLS CRPP-VO1.6CX - Audio Hellman
File Info : application/pdf, 12 Pages, 2.71MB
DocumentDocumentUser manual VOLVO Welcome to DLS! Thank you for buying a DLS Cruise CRPP-VO1.6CX. For us, it's all about the sound experience. We care deeply about sound and construction quality. In order for your experience to be as optimal as possible, it is important that you fully read this manual, preferably before you start your installation. Keep the manual in a safe and accessible place for future reference. Your speakers must be installed correctly in order to work as intended. Make sure you have all necessary tools nearby before starting and that you are completely confident in how to proceed. If you feel the slightest uncertainty; feel free to take the help of an experienced installer or a car audio dealer. Warranty This coaxial speaker is covered by warranty, depending on the conditions in the country where it is sold. If the speaker is returned for service, please include the original dated receipt with the product. General Some sound systems may vary in size of the door speaker. Make sure that your vehicle has the same size as this coaxial speaker, before you start the assembly This is a generic mounting instruction. The approach is similar to all of the described car models. Some screws and clips may be placed differently and depending on your car model. Declaration of conformity DLS plug and play speakers for vehicles are manufactured in accordance with the EU directive EEC 95/54 (72/245/ EEC) and are marked with the approval number. They are also marked in accordance with the WEEE-directive 2012/19/EC. The products are also produced in accordance with the EU RoHS directive 2015/863/EU. DLS CRUISE CRPP-VO1.6CX Content Welcome 1 Pre installation 2 Dismount door panel 2 Remove door speaker 3 Mount door speaker 4 Running-in time 5 Technical assistance 5 Specification speaker 6 Compatible car models 8 Product markings 9 DLS speakers are engineered by DLS Sweden, a part of: Winn Scandinavia AB Elementvägen 15 - SE-702 27 Örebro - Sweden Tel: +46 19 20 67 65 - E-mail: info@dls.se www.dls.se Designed & Sound tuned in Sweden. Included products: 2pcs Coaxial speakers Included in box: 4pcs Adhesive foams for wrapping 4pcs Terminal crimp connectors 8pcs Blind rivets 1pc Pry tool 1pc Manual Installation Dismount door panel Dismount the front door by removing the cover of the door panel. Hint: Use plastic PRY tools to avoid marks on the panels or damaging the plastic clips. Pre installation Disconnect Battery Before you start the process of replacing speakers, disconnect and secure the negative terminal from your battery/power source. This will prevent the risk of damaging yourself or the products. Place the disconnected terminal in a secure and isolated location away from any possible connection belonging to the battery/power source system. If your door has a corner cover (1) or a tweeter cover (2), you need to remove them first. Corner cover is attached with 2 clips and the tweeter cover is usually attached with 2 or 3 clips. Remove the door lock knob before removing the door panel. General info Some sound systems may vary in size of the door speaker. Make sure that your vehicle has the same size as this coaxial speaker, before you start the assembly This is a generic mounting instruction. The approach is similar to all of the described car models. Some screws and clips may be placed differently and depending on your car model. The DLS CRPP-VO1.6CX can be installed instead of DLS CRPP-VO1.6 but the OEM tweeter will in this case, still be connected. The sound improvement will not be as good as with the CRPP-VO1.6 Remove the electric window panel and disconnect the plug on the back side of the panel. Always use plastic PRY tools when removing panels and interior, to avoid marks on the panels and leather. 2 Depending on car model, the amount of screws and placement can vary. In most cases the screws used are Torx T25. There are several electric and mechanical connectors on the backside of the door panel. Release the door lock cable. Be careful when removing the door panels and lids. Use PRY tools. Disconnect all cables for lightning, speaker cable harness and any other connections. Remove door speaker The door speakers are either fixed with rivets or screws. Make sure you have correct tools for each operation. RIVETS Some newer models, don't have plastic clips to hold the door in place. Just remove the screws and gently press the door panel up. Be careful with the door lock knob. Just move the panel straight up. 3 Use a 4mm drill to remove the rivets. Make sure all remains from the old rivets are removed from the inside of the door. Just drill enough to remove the top of the rivets. Remember to disconnect the speaker harness before unmounting the speaker. SCREWS Speakers fixed with screws. Make sure to use correct tools to unscrew. Save the screws for reattachment. SCREWS (Mounting new speakers) If the speakers were fixed with screws. DLS recommends using the OEM screws to fix the new DLS speakers. Use the correct screw bit. Place the new DLS driver in the hole for the speaker and use the screws to fix the speaker. Mounting door speakers RIVETS (Mounting new speakers) If the speakers were fixed with rivets. DLS recommends using a rivet tool to fix the new DLS speakers. (Not included in CRPP-VO1.6CX) Place the new DLS driver in the hole for the speaker. Use a rivet tool and rivets to safely mount the driver. (Step 3 might be done several times) Connect the speaker harness. Start the assembly of the door panel. Reconnect all wires harness. Connect all plugs to the door cover, reconnect the unlocking device, place the door cover from the top, by the window seal and push it gently down. Make sure the clips are in place and can engage. Give the door panel a push by the hand to attach to the clips. Mount and fasten all screws to the correct places. Remember to put the door locking knob back. 4 Finally Start assembling the covers again to finish the work. Make sure that no screws or clips are left over. Reconnect the battery/power source terminal. Finally, it's time to play some good music and enjoy! Running-in time Allow the coaxial speaker to play for at least 15-20 hours in order to perform at its possibly best. This run-in can be made with tone sweep or with just music. Start at a moderate volume and increase the volume step by step during the running in period. After the 15-20 hour run in session the performance and characteristics will be in the correct condition. DLS Support For technical assistance, ask your car audio dealer where the product was sold or the distributor in your country. You can always contact the DLS Helpdesk in Sweden at e-mail: info@dls.se. Information can also be found on our WEBsite www.dls.se. We follow a policy of continuous advancement in development. For this reason, all or part of the specifications and designs may be changed without prior notice. 5 Specifications Art. no CK-CRPP-VO1.6CX Woofer 6.5" / 165 mm with glass fiber cone Tweeter 1" / 25 mm silk dome tweeter with accessories RMS Power 90 W MAX Power 180 W Impedance 4 Ohm Sensitivity 90dB 1W / 1M Freq. range 65 Hz - 25 kHz Crossover 4.8 kHz 6dB / Oct with Mundorf caps DLS Cruise CRPP-VO1.6CX Tweeter Technical Specification: Size 1" / 25.4 mm Voice Coil Material CCAW voice coil / Aluminium former Frame Glass Fiber Reinforced ABS Magnet Neodymium / Copper shorting ring Cone Natural silk dome DLS Cruise CRPP-VO1.6CX Woofer Technical Specification Size Voice Coil Size Voice Coil Material Basket Magnet Cone Suspension 6.5" / 165 mm 1" / 25mm CCAW voice coil / Kapton former Glass Fiber Reinforced ABS Ferrite Glass Fiber Rubber Electro-Acoustic Parameters Re Fs Mms Cms Vas Qts Qes Qms Bl Spl Sd 3.2 Ohm 70.8 Hz 10.7 gr 0.426 14.1L 0.92 1.05 7.0 4.37 T.m 87.1 dB 1W/1M 139 cm² Impedance VS Frequency 6 193.9 167.9 Ø 171.5 6.4 Ø 90 7 80 34 78 DLS Cruise CRPP-VO1.6CX The DLS coaxial speaker is developed to be installed in the back door of your car. However, you can mount CRPP-VO1.6CX in the front door even if an OEM component kit is installed in your car. The tweeter level will be different due to the placement of the tweeter in the coaxial speaker and your OEM tweeter will still be connected, by default to your stereo. DLS Cruise CRPP-VO1.6CX compatible car models Car Volvo Volvo Volvo Volvo Volvo Volvo Volvo Volvo Volvo Volvo Volvo Model C30 S40 S80 S60 V70 V40 V50 V60 V60 XC XC70 XC60 Year 2007-2013 2008-2012 2007-2017 2011-2017 2008-2016 2012-2016 2004-2012 2011-2017 2016-2017 2008-2016 2009-2017 Front speaker CRPP-VO1.6CX* CRPP-VO1.6CX* CRPP-VO1.6CX* CRPP-VO1.6CX* CRPP-VO1.6CX* CRPP-VO1.6CX* CRPP-VO1.6CX* CRPP-VO1.6CX* CRPP-VO1.6CX* CRPP-VO1.6CX* CRPP-VO1.6CX* Rear speaker CRPP-VO1.6CX CRPP-VO1.6CX CRPP-VO1.6CX CRPP-VO1.6CX CRPP-VO1.6CX CRPP-VO1.6CX CRPP-VO1.6CX CRPP-VO1.6CX CRPP-VO1.6CX CRPP-VO1.6CX CRPP-VO1.6CX *Disclaimer The coaxial speaker can be placed in the front doors, but not optimal. 8 Product markings The crossed-out wheelie bin symbol means that the product, literature and packaging included must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority. This product has been granted with the CE certification mark to show that the product follows the health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). DLS products complies with the relevant provisions of the RoHS Directive for the European Union. In common with all Electrical and Electronic Equipment (EEE) the product should not be disposed of as household waste. Alternative arrangements may apply in other jurisdictions. DLS is a global partner of the European Mobile Media Association, an organisation that focus on promoting the custom made mobile media installations to consumers. We follow a policy of continuous advancement in development. For this reason all or part of specifications & designs may be changed without prior notice. We reserve for possible typos, factual or numeric errors that may have been printed on any products, package designs, user manuals and/or other included accessories. 9