DIG V2 Support - StrymonDIG V2 Support - Strymon
Strymon Effects Pedals
Instruction Manual for strymon models including: DIG, Digital Delay Pedal, DIG Digital Delay Pedal, Delay Pedal, Pedal
Effects Pedal Support - Strymon
29 giu 2022 — DELAY TYPE. Changes the digital delay character: 24/96: modern, clean delay with subtle dynamics adm: early '80s adaptive delta modulation.
Support - Strymon
File Info : application/pdf, 5 Pages, 663.11KB
DocumentDocumentQUICK START GUIDE KNOBS AND SWITCHES MOD TYPE Sets the amount of delay line modulation: off: no modulation light: subtle modulation deep: thick, rich modulation TIME Controls the delay time for Delay 1. Acts as a master time control for both delays. TIME 2 Sets the rhythmic subdivision relationship between Delay 1 and Delay 2. TONE Sets the feedback filter response. Turn left for high cut and right for low cut. 12 o'clock is flat response. TAP Tap to set the master delay time. The TAP LED flashes RED to indicate the tempo. Hold footswitch to engage circular repeats. DELAY TYPE Changes the digital delay character: 24/96: modern, clean delay with subtle dynamics adm: early `80s adaptive delta modulation process provides snappy, percussive delays 12 bit: mid 80's 12-bit conversion method yields slightly darker and warmer delays MIX Controls wet/dry mix for Delay 1. 3 o'clock is 50/50 mix. MIX 2 Controls wet/dry mix for Delay 2. 3 o'clock is 50/50 mix. REPEATS Adjusts the number of repeats for both delays. ON Engages the effect. RED LED indicates the effect is engaged. REAR PANEL CONNECTIONS AUDIO INPUT SELECTOR MONO: Use with a mono input signal. Output is stereo. STEREO: Use with a stereo input signal. Output is stereo. IN High impedance, ultra low-noise, discrete Class A JFET preamp input. TRS adapter cable required for stereo input signal. OUTPUTS Low impedance stereo audio signal outputs. Use OUT L for mono output. USB-C Computer connection for controlling via MIDI and firmware updates. 9VDC Use the included power supply or an adapter with the following rating: 9VDC, center negative, 300mA minimum. EXP / MIDI Multifunction communication jack for external control of DIG's features and functions. Use a standard TRS expression pedal for continuous control over the knobs of the pedal (default setting). See complete User Manual for details about configuring for MIDI communication or accessories such as Strymon Conduit, MultiSwitch Plus, and MiniSwitch. >> Download the complete User Manual at strymon.net/support/dig-v2/ << SAMPLE SETTINGS CASCADING ECHOES DISTINCT BOUNCES DOWN FROM THE HILLS SHORT ROOM SUBTLE REPEATS LIVE EDIT FUNCTIONS DIG provides a way to adjust several parameters that do not have a dedicated knob or switch. These are called Live Edit functions and details about utilizing and storing them are included in the complete User Manual. The sample settings on this page use the factory default values for these functions. REV B