User Guide for GIGABYTE models including: GS27Q X, GS27QA, GS27QX Gaming Monitor, GS27QX, Gaming Monitor, Monitor
File Info : application/pdf, 33 Pages, 5.02MB
DocumentDocumentGAMING MONITOR GS SERIES USER GUIDE GS27Q X / GS27QA Copyright © 2023 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. · In order to assist in the use of this monitor, carefully read the User Guide. · For more information, check on our website at: https://www.gigabyte.com The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. CONTENTS INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Installing the Stand Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Adjusting the Viewing Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Installing a Wall-Mount Bracket (Optional) . . . . . . . . . . . . . . . . . . . . . . . .9 USING THE DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Turning the Power On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Selecting the Input Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Function Key Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 APPENDICES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Supported Timing List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Basic Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 GIGABYTE Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Stability Hazard Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 User Comfort Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 REGULATORY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 INTRODUCTION Package Contents The following items come with your packaging box. If any of them is missing, please contact your local dealer. Monitor Monitor Base Power Cable Stand DP Cable Quick Start Guide Warranty Card Note: Please keep the packaging box and packing materials for possible transportation of the monitor. - 4 - Product Overview Front View 1 Power LED Rear View 1 2 2 Control button HDMI-1 HDMI-2 DP AC HDMI-1 HDMI-2 DP 1 1 HDMI ports (x2) 2 DisplayPort 23 4 3 Headphone jack 4 AC IN jack - 5 - GETTING STARTED Installing the Stand Base 1. Position the monitor face down on a flat surface with its protective foam underneath and with its Styrofoam bag covered. 2. Fit the stand riser and stand base together with a coin, a screwdriver, or the pull ring attached on the stand base. 3. Tear apart the Styrofoam bag. Fit the stand riser to the groove on the back of the monitor. Push the stand until it snaps into place. 4. Take the monitor from the protective foam by holding its stand riser. Place it upright on a table. - 6 - Cable Management 1. Take out the cable clip from the EPS. 2. Snap the cable clip into the stand, then pass the power cord and the cable through the cable clip in the stand to connect them to the monitor. - 7 - Adjusting the Viewing Angle 1. Place one hand on the base to prevent the monitor from tipping over during the adjustment. 2. Place the other hand on the top-center of the screen and apply forward or backward pressure to adjust the angle to the desired viewing angle (-5° to 20°). 20° 5° - 8 - Installing a Wall-Mount Bracket (Optional) Use only 100 x 100 mm compliant wall mount kit. Install the wall mount according to the manufacturer's instructions. 1. Position the monitor face down with its protective foam or with a nonabrasive cloth underneath. 2. Align the wall-mount bracket installation holes with the screw holes on the back of the monitor. 3. Use the screws to secure the bracket in place. 100 mm HDMI-1 HDMI-2 DP AC 100 mm Note: To mount the monitor on the wall, refer to the installation guide that is included in the wall-mount bracket kit. - 9 - USING THE DEVICE Turning the Power On/Off Make sure the power switch next to the AC power input jack is switched to ON. Power On 1. Connect one end of the power cable to the AC IN jack at the rear of the monitor. 2. Connect other end of the power cable to a power outlet. 3. Press the Control button to turn on the monitor. The Power LED will light in white, indicating the monitor is ready to use. Power Off Press the Control button for 2 seconds to turn off the monitor. Note: When the Main menu appears on the screen, you can also turn off the monitor by moving the Control button down ( ). Refer to page 13. - 10 - Selecting the Input Source 1. Move the Control button right ( ) to enter the Input menu. 2. Move the Control button center ( ) to select the desired input source. Then press the Control button to confirm. Input HDMI 1 HDMI 2 DisplayPort Select Exit OPERATIONS Quick Menu Hot Key By default, the Control button has been assigned with the specific function. Note: To change the preset hot key function, refer to the "Quick Switch" section on page 20. To access the hot key function, do the following: · Move the Control button up ( ) to enter the Black Equalizer menu. Move the Control button up/down ( ) to adjust the setting and press the Control button to confirm. Black Equalizer 10 - 11 - Adjust Exit · Move the Control button down ( ) to enter the Picture Mode menu. Move the Control button center ( ) to select the desired option and press the Control button to confirm. Picture Mode Standard Gaming Movie Reader sRGB Custom ECO Select Exit · Move the Control button left ( ) to enter the Crosshair menu. Move the Control button up/down ( ) to select the desired option and press the Control button to confirm. Crosshair OFF Style 1 Style 2 Style 3 Style 4 Select Exit · Move the Control button right ( ) to enter the Input menu. Refer to the "Selecting the Input Source" section. Note: To close the menu, move the Control button left ( ). - 12 - Function Key Guide · Press the Control button to display the Main menu. Settings SETTING Crosshair CROSSHAIR Exit EXIT POWER OFF GAME ASSIST Game Assist Power Off Then use the Control button to select the desired function and configure the related settings. Game Assist · When the Main menu appears on the screen, move the Control button right ( ) to enter the Game Assist menu. Game Assist Game Info Display Alignment Gaming Timer Refresh Rate Info Location Select Exit - 13 - · Game INFO: Configure the FPS (First Person Shooting) game related settings. Select Gaming Timer to select countdown timer mode. To disable this function, set the setting to OFF. Select Refresh Rate to enable/disable real-time refresh rate setting. Select Info Location to specify the location of the information to be shown on the screen. : 60 · Display Alignment: When the function is enabled, it displays the alignment lines on the four sides of the screen, providing handy tool for you to line up multiple monitors perfectly. Configure the Device Settings When the Main menu appears on the screen, move the Control button up ( ) to enter the Settings menu. Note: Use the Control button to navigate through the menu and make adjustments. Exit Move/Adjust Enter/Confirm Button Guide - 14 - Gaming Configure the game related settings. Resolution 2560x1440 Black Equalizer 10 Aim Stabilizer OFF Gaming Picture Display PIP/PBP System Language Reset all Aim Stabilizer Black Equalizer Super Resolution Display Mode Overdrive FreeSync Premium Overdrive OFF Refresh Rate 60 HZ FreeSync Premium ON PPicitcuturereMMooddee: : SSttaannddaarrdd 10 Exit Move/Adjust Enter/Confirm Item Aim Stabilizer Black Equalizer Super Resolution Display Mode Overdrive FreeSync Premium Description When this function is enabled, it reduces the motion blur in a fast moving games. Note: This function is not available under the following conditions: - when the frequency setting is lower than 100Hz. - when the FreeSync Premium function is activated. Adjust the brightness of the black areas. Sharpen the low resolution images. Select the aspect ratio of the screen. · Full: Scale the input image to fill the screen. Ideal for 16:9 aspect images. · Aspect: Display the input image without geometric distortion filling as much of the screen as possible. Note: This option is not compatible with FreeSync Premium and PIP/PBP functions. Improve the response time of the LCD monitor. When this function is enabled, it eliminates the screen lag and tearing while playing games. - 15 - Picture Configure the image related settings. SDR Brightness Contrast 50 50 Gaming Picture Display PIP/PBP System Language Reset all Standard Gaming Movie Reader sRGB Custom ECO Sharpness 5 Gamma Gamma 3 Color Temperature Normal Brightness Contrast Color Vibrance Sharpness Gamma Color Temperature Low Blue Light DCR PPicitcuturereMMooddee: : SSttaannddaarrdd 50 Exit Move/Adjust Enter/Confirm Item Standard Gaming Movie Reader sRGB Custom ECO Description For editing documents or browsing websites. For playing games. For watching movies. For viewing documents. For viewing photos and graphics on the computer. Customized picture mode settings. For Energy saving mode. Note: Picture mode "Standard", Low blue light "Level 10" is the optimized setting in compliance with TÜV Low Blue Light Certification. - 16 - Display Configure the display screen related settings. SDR Brightness Contrast 50 50 Gaming Picture Display PIP/PBP System Language Reset all Input Overclock RGB Range Overscan Sharpness 5 HDMI 1 HDMI 2 DisplayPort Gamma Gamma 3 Color Temperature Normal PPicitcuturereMMooddee: : SSttaannddaarrdd Exit Move/Adjust Enter/Confirm Item Input Overclock RGB Range Overscan Description Select the input source. Select ON/OFF. Select an appropriate RGB range setting or let the monitor to detect it automatically. Note: This option is only available for HDMI input. When this function is enabled, it slightly enlarges the input image to hide the outermost edges of the image. - 17 - PIP/PBP Configure multi-image related settings. SDR Brightness Contrast Sharpness 50 50 5 Gaming OFF Picture PIP Display PBP PIP/PBP System Language Reset all Gamma Gamma 3 Color Temperature Normal PPicitcuturereMMooddee: : SSttaannddaarrdd Exit Move/Adjust Enter/Confirm Item OFF PIP PBP Description Disable PIP/PBP function. Divide the screen into two parts (main window and inserted window) · Signal source: Change the input source of the inserted window. · PIP size: Adjust size of the inserted window. · Position: Move the inserted window to a different position. · Display switch: Switch between the two windows. · Audio switch: Select the audio source of the desired sound. Display 1x1 split screen (with left and right windows). · Signal source: Change the input source of the right window. · PBP size: Adjust size of the window. · Display switch: Switch between the two windows. · Audio switch: Select the audio source of the desired sound. Note: PIP/PBP is not compatible with HDR and FreeSync Premium functions. - 18 - System Configure the system related settings. SDR Brightness Contrast Sharpness 50 50 5 Gaming Picture Display PIP/PBP System Language Reset all Audio OSD Setting Quick Switch Other Setting Volume Mute Gamma Gamma 3 Color Temperature Normal PPicitcuturereMMooddee: : SSttaannddaarrdd Exit Move/Adjust Enter/Confirm Item Audio OSD Settings Description Configure the headphone settings. · Volume: Adjust the volume level. · Mute: Enable/Disable the mute function. Configure the on-screen display (OSD) menu related settings. · Display Time: Set the length of time the OSD menu remains on the screen. · OSD Transparency: Adjust the OSD menu transparency. · OSD Lock: When this function is enabled, no OSD adjustment is allowed. Note: To disable the OSD lock function, press the Control key. When the message appears on the screen, select Yes to confirm. The button is locked, confirm to unlock OSD. No Yes - 19 - Item Quick Switch Other Settings Description Assign the function of the hot keys. Available options: Aim Stabilizer, Black Equalizer, Crosshair, Low Blue Light, Volume, Input, Contrast, Brightness, and Picture Mode. The default setting of the hot keys as below: Ö Up ( ): Black Equalizer Ö Down ( ): Picture Mode Ö Right ( ): Input Ö Left ( ): Crosshair · Resolution Notice: When this function is enabled, the current resolution message will appear on the screen when the monitor switches to another input source. · Input Auto Switch: When this function is enabled, it automatically switches to an available input source. · Auto Power Off: When this function is enabled, the monitor will automatically turn off after a certain amount of time. · LED Indicator: By default, the LED indicator is set to Always ON. Ö Always OFF: Turn off the Power LED. Ö Always ON: The Power LED lights white during operation and lights interval every 1 sec. in standby mode. Ö Standby ON: The Power LED turns off during operation and lights interval every 1 sec. in standby mode. (Note: The Power LED will turn on for 1 minute after restarting the display in Standby ON mode.) · Quick Boot: When this function is enabled, it slightly improves the boot-up speed of the screen. - 20 - Language SDR Brightness Contrast 50 50 Gaming Picture Display PIP/PBP System Language Reset all English Deutsch Français Sharpness 5 Gamma Gamma 3 Color Temperature Normal PPicitcuturereMMooddee: : SSttaannddaarrdd Exit Move/Adjust Enter/Confirm Item Language Description Select an available language for the OSD menu. Reset All Restore the monitor to its factory default settings. SDR Brightness Contrast Sharpness 50 50 5 Gaming Picture Display PIP/PBP System Language Reset all Gamma Gamma 3 Color Temperature Normal PPicitcuturereMMooddee: : SSttaannddaarrdd Exit Move/Adjust Enter/Confirm - 21 - APPENDICES Specifications Item Model Panel Size Aspect Ratio Resolution LED Life Pixel Pitch Brightness Contrast Ratio Color Depth Active Display Area Viewing Angle Input/Output Terminals Power Supply Power Consumptions Dimensions (W x H x D) Weight Temperature Range (operation) Specifications GS27Q X GS27QA 27-inch 16:9 QHD (2560x1440) 30,000 hours (min.) 0.2331 (H) x 0.2331 (V) SDR 300 nits (typ.) / 250 nits (min.) 1000:1 (typ.) 16.7M (8Bit) 596.74 (H) × 335.66 (V) 178° (H)/178° (V) 2 x HDMI 2.0 1 x DP 1.4 1 x Headphone AC100~240V, 50/60Hz, 1.5A · On Mode: 34W · Standby: 0.5W · Off Mode: 0.3W · On Mode: 32W · Standby: 0.5W · Off Mode: 0.3W Note: The test conditions follow the CEC standards. 619 x 447.4 x 172 mm (with Stand) 5.4 Kg (With Stand) 4.5 Kg (Without Stand) 5.26 Kg (With Stand) 4.36 Kg (Without Stand) 0°C to 40°C Note: Specifications subject to change without notice. - 22 - Supported Timing List Model Timing List 640X480 / 60Hz 640X480 / 67Hz 640X480 / 72Hz 640X480 / 75Hz 720X400 / 70Hz 720X400 / 88Hz 720X480 / 60Hz 800X600 / 56Hz 800X600 / 60Hz 800X600 / 72Hz 800X600 / 75Hz 832X624 / 75Hz 1024X768 / 60Hz 1024X768 / 70Hz 1024X768 / 75Hz 1024X768 / 87Hz 1152X864 / 75Hz 1152X870 / 75Hz 1280X720 / 50Hz 1280X720 / 60Hz 1280X720 / 100Hz 1280X800 / 60Hz 1280X960 / 60Hz 1280X1024 / 60Hz 1280X1024 / 75Hz 1440X480 / 60Hz 1440X900 / 60Hz 1680X1050 / 60Hz 1920X1080 / 50Hz 1920X1080 / 60Hz 1920X1080 / 100Hz 1920X1080 / 120Hz 1920x1080 / 144Hz 1920X1080 / 165Hz 1920X1080 / 180Hz 1920X1080 / 240Hz GS27Q X HDMI 1 HDMI 2 DP V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V GS27QA HDMI 1 HDMI 2 DP V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V - 23 - Model Timing List 2560x1440 / 60Hz 2560x1440 / 120Hz 2560x1440 / 144Hz 2560X1440 / 165Hz 2560X1440 / 180Hz 2560X1440 / 240Hz GS27Q X HDMI 1 HDMI 2 DP V V V V V V V V V GS27QA HDMI 1 HDMI 2 DP V V V V V V V V V - 24 - Troubleshooting Problem No power No image appears on the screen Possible Solution(s) · Make sure the power cable is properly connected to the power source and the monitor. · Check the cable and plug to make sure they are not broken. · Make sure the monitor is turned on. · Make sure the monitor and the computer are properly connected and both devices are turned on. · Make sure you have selected the correct input source. Refer to page 11 or 17. The image does not fill the entire screen The colors are distorted No sound or volume is low · Try different Display Mode (aspect ratio) setting. Refer to page 15. · Make sure the input signal cable is properly connected. · Configure the image related settings. Refer to the "Picture" section. · Make sure the headphone cable is properly connected. · Adjust the volume level. Refer to page 19. · Check the Audio Source setting. · Adjust your computer sound related settings. Note: If the problem persists, please contact our customer service for further assistance. Basic Care · Wipe the screen with a soft, lint-free cloth to remove any residual dust. · Spray or apply the cleaning fluid onto a soft cloth. Then wipe the screen gently with the damp cloth. Note: · Make sure that the cloth is damp, but not wet. · When wiping, avoid applying excessive pressure on the screen. · Acidic or abrasive cleaners can damage the screen. GIGABYTE Service Information More service information, please visit GIGABYTE official website. https://www.gigabyte.com/ - 25 - SAFETY INFORMATION Safety Precautions Read through the following Safety Precautions before using the monitor. · Only use the accessories that are provided with the monitor or that which are recommended by the manufacturer. · Keep the plastic packaging bag for the product in a place that cannot be reached by children. · Before connecting the monitor to the power outlet, make sure that the voltage rating of the power cable is compatible with the power specification in the country where you are located. · The power cord plug must be connected to a properly wired and grounded power outlet. · Do not touch the plug with wet hands, otherwise easily cause electric shock. · Place the monitor in a stable and well-ventilated place. · Do not place the monitor near any heat sources such as electric radiators or direct sunlight. · The holes or openings on the monitor are for ventilation. Do not cover or block the ventilation holes with any objects. · Do not use the monitor near water, drinks, or all types of liquids. Failure to do so may result in electric shock or damage to the monitor. · Make sure to unplug the monitor from the power outlet before cleaning. · As the screen surface is easy to be scratched, avoid touching the surface with any hard or sharp object. · Use a soft lint-free cloth instead of a tissue to wipe the screen. You may use a glass cleaner to clean the monitor if required. However, never spray the cleaner directly onto the screen. · Disconnect the power cable if the monitor is not being used for a long period of time. · Do not attempt to disassemble or repair the monitor yourself. - 26 - Stability Hazard Precautions The product may fall, causing serious personal injury or death. To prevent injury, this product must be securely attached to the floor/wall in accordance with the installation instructions. Many injuries, particularly to children, can be avoided by taking simple precautions such as: · ALWAYS use stands or installation methods recommended by the manufacturer of the product set. · ALWAYS use furniture that can safely support the product. · ALWAYS ensure the product is not overhanging the edge of the supporting furniture. · ALWAYS educate children about the dangers of climbing on furniture to reach the product or its controls. · ALWAYS route cords and cables connected to your product so they cannot be tripped over, pulled or grabbed. · NEVER place a product in an unstable location. · NEVER place the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support. · NEVER place the product on cloth or other materials that may be located between the product and supporting furniture. · NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the product or furniture on which the product is placed. · If the existing product is going to be retained and relocated, the same considerations as above should be applied. · To prevent personal injury or damage to the product caused by tipping over due to earthquakes or other shocks, make sure to install the product in a stable location and take measures to prevent falling. User Comfort Recommendations The monitor adopts Flicker-Free technology which clears the eye visible monitor flicker and prevents users from suffering eye strain and fatigue. The following are some tips for comfortable viewing of your monitor: · Allow a minimum distance of 50 to 75cm (20" to 30") between your eyes and the monitor. · A general guideline is to position the monitor such that the top of the screen is at or slightly below your eye-height when you are comfortably seated. · Use adequate lighting for the type of work you are performing. · Take regular and frequent breaks (at least for 10 minutes) every half-hour. · Be sure to periodically look away from your monitor screen and focus on a far object for at least 20 seconds during the breaks. · Eye exercise can help reduce eye strain. Repeat these exercises frequently: (1) look up and down (2) slowly roll your eye (3) move your eyes diagonally. This model has passed Flicker Free and Low Blue Light verification by TÜV Rheinland. To learn more: https://www.gigabyte.com/tw/Support/FAQ/4310 - 27 - REGULATORY INFORMATION United States of America, Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. Avis de conformité à la réglementation d'Industrie Canada Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. European Union (EU) CE Declaration of Conformity This device complies with the following directives: Electromagnetic Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/EU, ErP Directive 2009/125/EC, RoHS directive (recast) 2011/65/EU & the Directive (EU) 2015/863 amendment of Annex II. Compliance with these directives is assessed using applicable European Harmonised Standards. European Union (EU) RoHS (recast) Directive 2011/65/EU & the European Commission Delegated Directive (EU) 2015/863 Statement GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals. - 28 - European Union (EU) Community Waste Electrical & Electronic Equipment (WEEE) Directive Statement GIGABYTE will fulfill the national laws as interpreted from the 2012/19/EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive. The WEEE Directive specifies the treatment, collection, recycling and disposal of electric and electronic devices and their components. Under the Directive, used equipment must be marked, collected separately, and disposed of properly. WEEE Symbol Statement The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling. End of Life Directives-Recycling The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. CE Déclaration de Conformité Cet appareil est conforme aux Directives de l'UE suivantes: Directive Compatibilité Electromagnétique 2014/30/UE, Directive Basse Tension 2014/35/UE, Directive 2009/125/ CE en matière d'écoconception, la Directive RoHS II 2011/65/UE & Directive (UE) 2015/863 modifiant l'Annexe II. La conformité à ces directives est évaluée sur la base des normes européennes harmonisées applicables. CE-Konformitätserklärung Dieses Produkte erfüllen folgenden EU-Richtlinien: EMV-Richtlinie 2014/30/EU, Niederspannungsrichtlinie 2014/30/EU, Ökodesign-Richtlinie 2009/125/EC, RoHS-Richtlinie 2011/65/EG erfüllt und die Richtlinie (EU) 2015/863 zur Änderung von Anhang II. Die Konformität mit diesen Richtlinien wird anhand der anwendbaren harmonisierten Europäischen Normen bewertet. CE Declaración de conformidad Este producto cumplen con las siguientes Directivas de la Unión Europea: Directiva EMC 2014/30/EU, Directiva de bajo voltaje 2014/35/EU, Directiva de Ecodiseño 2009/125/CE, Directiva RoHS 2011/65/EU y la Directiva (EU) 2015/863 por la que se modifica el Anexo II. El cumplimiento de estas directivas se evalúa mediante las normas europeas armonizadas. - 29 - CE declaração de conformidade Este produto estão em conformidade com das seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/UE; Diretiva CEM 2014/30/UE; Diretiva Conceção Ecológica 2009/125/CE; Diretiva RSP 2011/65/CE e a Diretiva (UE) 2015/863 que altera o Anexo II. A conformidade com estas diretivas é verificada utilizando as normas europeias harmonizadas. CE Dichiarazione di conformità I prodotti sono conformi con una o più delle seguenti Direttive UE, come applicabile: Direttiva EMC 2014/30/UE, Direttiva sulla bassa tensione 2014/35/UE, Direttiva Ecodesign EMC 2009/125/CE, Direttiva RoHS 2011/65/UE e Direttiva (UE) 2015/863 recante modifica dell'Allegato II. La conformità con tali direttive viene valutata utilizzando gli Standard europei armonizzati applicabili. CE Deklaracja zgodnoci Urzdzenie jest zgodne z nastpujcymi dyrektywami: Dyrektywa kompatybilnoci elektromagnetycznej 2014/30/UE, Dyrektywa niskonapiciowej 2014/35/UE, Dyrektywa ErP 2009/125/WE, Dyrektywa RoHS 2011/65/UE i Dyrektywa (UE) 2015/863 zmieniajca Zalcznik II. Zgodno z tymi dyrektywami oceniono za pomoc majcych zastosowanie zharmonizowanych norm europejskich. CE Prohlásení o shod Toto zaízení spluje pozadavky Smrnice o Elektromagnetické kompatibilit 2014/30/ EU, Smrnice o Nízkém naptí 2014/35/EU, Smrnice ErP 2009/125/ES, Smrnice RoHS 2011/65/EU a Smrnice (EU) 2015/863 kterou se mní Píloha II. Shoda s tmito smrnicemi je posuzována v souladu s píslusnými evropskými harmonizacními standardy. CE Megfelelségi nyilatkozata A termék megfelelnek a következrájuk vonatkozó egy vagy több Európai Uniós irányelvnek: EMC irányelv 2014/30/EU, Kisfeszültség villamos berendezésekre vonatkozó irányelv2014/35/EU, Környezetbarát tervezésrl szóló irányelv 2009/125/EZ, Direktivi RoHS irányelv 2011/65/EU és Direktivi (EU) 2015/863 o izmjeni Priloga II. A fenti irányelveknek történmegfelelés megállapítása a vonatkozó harmonizált európai szabványok segítségével történik. CE : 2014/30/ , 2014/35/EU, 2009/125/ , RoHS 2011/65/ (EE) 2015/863 II. . - 30 - CE Declaraie de conformitate Acest aparat este conform cu: Compatibilitatea electromagnetic Directiva 2014/30/ UE, Directiva privind echipamentele de joas tensiune 2014/35/UE, Directiva privind proiectarea ecologic 2009/125/CE, Directiva RoHS 2011/65/UE & Directiva (UE) 2015/863 de modificare a Anexei II. Conformitatea cu aceste directive este evaluatutilizând Standardele europene armonizate aplicabile. CE Overensstemmelseserklæring Denne enhed overholder stk.: elektromagnetisk kompatibilitet Direktivet 2014/30/EC, LVD Direktivet 2014/35/EC, miljøvenligt design Direktivet 2009/125/EF, RoHS Direktivet 2011/65/EU & Direktivet (UE ) 2015/863 om ændring af Bilag II. Overholdelse af disse direktiver vurderes med gældende europæiske harmoniserede standarder. CE Vyhlásenie o zhode Tento produkt spajú najmenej jednu z nasledujúcich platných smerníc EÚ: Smernica 2014/30/ES pre elektromagnetickú kompatibilitu, Smernica 2014/35/ES o Nízkom Napätí (LVD), Smernica 2009/125/ES pre ekodizajn, Smernica RoHS 2011/65/EÚ & Smernica (EÚ) 2015/863 ktorou sa mení Príloha II. Zhoda s týmito smernicami sa hodnotí pouzitím príslusných európskych harmonizovaných standardov. CE Vaatimustenmukaisuusvakuutus Tämä tuote on näiden EU-direktiivien mukainen: EMC Direktiivi 2014/30/EY, LVD Direktiivi 2014/35/EY, Ekologista suunnittelua koskeva Direktiivi 2009/125/EY, RoHS Direktiivi 2011/65/EU & Direktiivi (EU) 2015/863 Liitteen II muuttamisesta. Yhdenmukaisuus näiden direktiivien kanssa on arvioitu käyttäen soveltuvia eurooppalaisia harmonisoituja standardeja. CE Försäkran om överensstämmelse Denna produkt uppfyller följande direktiv: Direktivet om Eelektromagnetisk kompatibilitet 2014/30/EU, Lågspänningsdirektivet 2014/35/EU, Ekodesigndirektiv 2009/125/EG, Direktiv RoHS 2011/65/EU mid Direktiv (EU) 2015/863 om ändring av Bilaga II. Överensstämmelse med dessa direktiv bedöms med hjälp av tillämpliga europeiska harmoniserade standarder. CE Conformiteitsverklaring Dit product voldoet aan de volgende van toepassing zijnde EU-richtlijnen: EMC Richtlijn 2014/30/EG, Laagspanningsrichtlijn 2014/35/EU, Ecodesign-richtlijn 2009/125/EG, G RoHS Richtlijn 2011/65/EG & Richtlijn (EU) 2015/863 tot wijziging van Bijlage II. Het voldoen aan deze richtlijnen is beoordeeld met de van toepassing zijnde Europese geharmoniseerde normen. - 31 - CE Vyhlásenie o zhode Toto zariadenie vyhovuje nasledujúcim smerniciam: Smernica elektromagnetickej kompatibility 2014/30/EÚ, Smernica o nízkom napätí 2014/35/EÚ, Smernica o výrobkoch týkajúcich sa energie 2009/125/ES, Smernica RoHS 2011/65/EÚ & Smernica (EÚ) 2015/863 ktorou sa mení príloha II. Zhoda s týmito smernicami sa hodnotí pouzitím príslusných európskych harmonizovaných standardov. India RoHS This product complies with the "India E-waste (Management and Handling) Rule 2011" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule. Japan Class 1 Equipment Statement · · Japan VCCI Class B Statement B VCCI B VCCI-B - 32 - China RoHS Compliance Statement Environment-friendly use period : (Pb) (Hg) (Cd) (Cr+6) (PBB) (PBDE) × × × SJ/T 11364 GB/T 26572 × GB/T 26572 - 33 -