Proove Guardian 10000mAh 22.5W Power Bank
User Manual
About the Product
Thank you for choosing Proove! Please read the user manual carefully before using the product.
Product Parameters
- Material: PC + aluminum
- Battery Capacity: 10000mAh, 3.7V/74Wh
- Battery Type: Lithium-polymer
- Input: Type-C
- Output: Type-C, 2x USB
- Fast Charging Protocols: PD, AFC, FCP, SCP, QC 2.0-5.0
- Input Power (Type-C): DC 5V/2.4A, 9V/2A, 12V/1.5A
- Output Power (Type-C): DC 5V/3A, 9V/2.22A, 12V/1.67A (20W)
- Output Power (USB 1/2): DC 4.5V/5A, 5V/4.5A, 5V/3A, 9V/2A, 12V/1.5A (22.5W)
- Maximum Power: 22.5W
- Product Size: 140x65x14mm
- Weight: 251.8g
Package Contents
- Portable charger x1
- Manual x1
- Stickers x1
Product Details
Description of the power bank's physical features and ports:
- 1. Power Button: Used to turn the power bank on or off.
- 2. LED Display: Shows the current charge level.
- 3. USB1 Port: Standard USB-A output port.
- 4. Type-C Input/Output: Versatile port for charging the power bank or charging other devices.
- 5. USB2 Port: Another standard USB-A output port.
Visual representation of the power bank with numbered ports: A grey power bank is shown from the top. Numbered indicators point to: 1. Power button, 2. LED display, 3. USB1 port, 4. Type-C input/output port, 5. USB2 port. The LED display shows "100%" and "10000mAh". The "proove" logo is visible on the device.
Product Operation
- Charge the power bank to 100% before first use.
- To charge your devices, connect them to the appropriate USB or Type-C output port.
- Ensure the power bank is on (press the power button if necessary).
Power Indicators
- 100%: Fully charged.
- 0%: The device is low on power and needs recharging.
The screen displays the charge level from 100% to 0%. When the level approaches 0%, you should charge the device.
Troubleshooting
What to do if the device does not charge?
- Check if the cable, charger, or adapter is working.
- If not, use compatible components.
What to do if my phone won't charge?
- Check that the device is turned on and has a remaining charge.
- If the problem persists, contact your local retailer.
Warnings
- If the device is not used for a long time, charge it at least once every 3 months.
- Slight heating during charging is normal if the temperature remains below 55°C.
- Store the device in a dry place and do not clean it with chemicals.
- Dispose of the device in an environmentally responsible manner.
- Children should use the device only under adult supervision.
- Avoid impact, disassembly, piercing, or exposure to moisture.
- Do not use the device with incompatible voltage or current to avoid fires or other problems.
- Improper battery replacement may result in an explosion. The battery should be replaced by qualified personnel only.
- The battery must not be exposed to sunlight, fire, or overheating.
- Do not use the device after contact with water.
- Failure to observe the operating instructions may result in malfunctioning of the product and void the warranty.
Distributor Information
Supplier/Distributor: Sunnysoft s.r.o.
Kovanecká 2390/1a, 190 00 Prague 9, Czech Republic
Website: www.sunnysoft.cz
Certifications and Compliance
The device complies with relevant standards, indicated by:
- CE (Conformité Européenne)
- UKCA (UK Conformity Assessed)
- FC (Federal Communications Commission)
- Recycling symbols (e.g., PAP for paper packaging)
- WEEE symbol (Waste Electrical and Electronic Equipment)
