Installation Guide for Zip Water models including: BKL2, BC20, H55784Z01AU Hydro Tap G5 BC Home, H55784Z01AU, Hydro Tap G5 BC Home, G5 BC Home, BC Home

HydroTap G5 - zip-website-media.s3.ap-southeast-2.amazonaws.com

bkl2 hydrotap g5 v1.10 08.2024 hydrotap g5 scale 1:5 all dimensions in mm unless otherwise specified. installation diagrams are for illustrative purposes only.

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 198.99KB

Document Document

BKL2 HydroTap G5 v1.10 08.2024 BC BC20
Ventilation requirements
Contact your local service provider if ventilation is not suitable

HydroTap Tap options
Celsius Plus All-in-One Tap 226

min. 40

50mm min clearance beside inlet
Air exhaust cut-out
240
Tap Positioning
Position the Tap to dispense into the sink, allowing clearance for a cup or teapot.
Ø50mm hole for Tap Sink Celsius Plus All-in-One Tap
Clearance Envelope

52

4mm buffer pad air space

60 50

Clearance Envelope

200 min.

333

IEC Flex & Plug 230-240V, 50Hz power outlet

Mains cold water isolation valve (not supplied)

40mm min. overhang is required. Refer to installation instructions

280

50 min.

for alternative ventilation.

478

SCALE 1:5

ALL DIMENSIONS IN MM UNLESS OTHERWISE SPECIFIED. INSTALLATION DIAGRAMS ARE FOR ILLUSTRATIVE PURPOSES ONLY. HOSES ARE NOT SHOWN TO SCALE AND CANNOT BE LENGTHENED.

440 1 51
255 85 72.5

284
181 275

27 60°

30°

45
Mains hot water supply installation
Hot and cold water supply required

50mm hole in sink/benchtop for All-in-One tap
RED marked braided hose to mixer tap
Hot water isolation valve (not supplied)
H

BLUE marked braided hose
Braided hose to HydroTap Command Centre
MAINS inlet
Mains water isolation valve (not supplied)

HydroTap G5 BC Home
shown with Celsius Plus All-in-One Tap