Stair Step Induction Probe
Model No.: ES-T
Features
- IR reflection induction probe for use with stair LED controller (ES32 or ES16).
- Powered by low voltage 5VDC, output 5V pulse signal.
- The probe outputs a high-level signal when a person goes through.
- The maximum reflection distance is 1.4m.
Technical Parameters
| Parameter | Input and Output | Safety and EMC | Environment |
|---|---|---|---|
| Input voltage | 5VDC | EMC standard (EMC): ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-17 V3.2.4 | Operation temperature: Ta: -30°C~+55°C |
| Output current | <10mA | Safety standard (LVD): EN 62368-1:2020+A11:2020 | Case temperature (Max.): Tc:+60°C |
| Output signal | 5V pulse signal, high is ON, low is OFF | Certification: CE, EMC, LVD | IP rating: IP20 |
| Reflection distance Max. | 1.4m | Warranty: 5 years | Package Size: L80 x W80 x H25mm |
| Reflection type | IR | Gross weight: 0.045kg |
Mechanical Structures and Installations
Dimensions:
Probe dimensions: 19.0 mm x 12.5 mm
Reflective plate dimensions: 65.00 mm x 40.00 mm x 8.00 mm
Installation schematic:
The maximum reflection distance is 1.4m.
Distance from the ground >5cm.
Notes:
- Stair step induction probe installed on the first or last stair step.
- Stair step induction probe installation should be more than 5cm from the ground.
Sensor wire define
Wire length: 1 meter
- +: Power input +
- S: 5V level signal, high is ON, low is OFF
- -: Power input -
Wiring diagram (used with ES32)
Up direction IR sensor
Connects to INPUT 01-08 on the ES32 controller.
Down direction IR sensor
Connects to INPUT 09-16 on the ES32 controller.
LED Outputs
16 x Single color LED strip outputs (01-16 STEP LED OUTPUT).
SPI Output
Connects to RGB LED pixel strip.
Daylight sensor
Connects to LUX DET.
Power Supply
Connects to a 5-24VDC Constant Voltage Power Supply (AC100-240V).