User Guide for BAILUN YACHEN models including: 2BNF9-B04, 2BNF9B04, b04, B04 Smart Lock, B04, Smart Lock, Lock
Shenzhen BAILUN YACHEN Technology Development Co., Ltd. B04 Smart Lock 2BNF9-B04 2BNF9B04 b04
File Info : application/pdf, 1 Pages, 5.64MB
DocumentDocumentNN
'
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device can operate without distance restriction between the radiator and user body.
'
Passcode Page
ENGLISH CyanMagentaYellowBlack
HOW TO REGISTER
Download the Smart Lock app from Google Play or App Store
Search " T T Lock."
APP UNLOCK/LOCK
APP Guide
Version 1.0
STEP 1
Tap on register to get started !
STEP 2
Fill out this and then tap "Get Code". You will be sent a verification code to verify your account ! Once, you receive it, tap on "Register"
Note: The Smart Lock app is needed to use this lock. If this lock was professionally installed (or installed by someone other than the homeowner), make sure this step is performed by the homeowner.
PASSCODES
To unlock the lock, tap this icon once. To lock the lock, press and hold on this icon.
Note: This will only work while you are within bluetooth range of the lock. Refer to Gateway Guide page for remote unlock lock i/nformation.
FINGERPRINTS To add a fingerprint follow these instructions:
Generate Passcode
Enter a name for this Passcode
STEP 1
To access the passcode menu, tap on "Generate Passcode". This will take you to the passcode page.
STEP 2
Enter a name for this
Passcode.
Here is a breakdown of the 6 different code types for different durations.
Permanent
Lasts permanently
Erase
Erases all codes on lock
Timed One-time
Lasts between selected hours Lasts for one use
Custom Recurring
Choose your own digits such as 4321 (permanent or timed)
Lasts during scheduled hours weekly
eKEYS
Fingerprints
Step1
Tap on Fingerprints.
Permanent Name
Add Fingerprint Timed
Next
Step3
Select Fingerprint type depending on when you would like it to be valid.
Add Fingerprints
Step2
Tap on "Add Fingerprints"
Step4
Follow instructions on app. You will be asked to place your finger on the sensor 4 times.
Experiencing issues with fingerprint recognition?
Ensure the sensor surface is clean. Try a different finger. Ensure your finger is moist enough. Take out batteries for a minute and place back in.
eKey
Best Practices: It is strongly recommended that the recipient first
register for an account using the Smart Lock app.
Step1
eKeys work by sharing app access of your lock with another Smart Lock account. eKey recipients will be able to use their phone to unlock/lock the lock.
Timed
Send eKey Permanent One-time
Recipient
Enter Recipient's Account
Next
Step2
Enter recipient's username. It will be the phone number or email address used during registration. eKeys do not require wifi or bluetooth to be sent or revoked.
LOCK SETTINGS
SettingsBasics
SettingsWireless Keypad Door Sensor
Basics
Gateway Wireless Keypad
Gateway Wireless Keypad Door Sensor
Remote Unlock Auto Lock Passage Mode Lock Sound
Remote Unlock Auto Lock Passage Mode Lock Sound Privacy Lock Reset Button
Lock Clock Diagnosis Upload Data Import from another lock Fireware Update
Attendance Unlock Notification
Here are some settings you should familiarize yourself with.
Unlock Notification
Under Basics you can view and change information such as Lock Name.
Gateway shows signal strength if Gateway is connectedU.nlock Notification
With Remote Unlock on and a Gateway connected, you can remotely unlock/lock your lock.
Lock Sound adjusts the locks sound level.
Unlock Notification
Import from another lock allows for the transfer of passcodes and fobs from one lock to another.
Unlock Notification
Delete will remove the lock from your account and clear any settings one the lock. You must be near the lock to do this.
WIRELESS KEY FOB
Wireless Key Fob
Do something similar with "Wireless Key Fob" Follow these steps.
1. Tap on "Wireless Key Fob" 2. Tap on "Add Key Fob" 3. Choose validity period. 4. Follow on app instructions to pair the wireless
key fob. 5. Use unlock and lock to interact with lock.
Note: A Wireless Key Fob can only connect to one lock.
PAIRING YOUR LOCK
STEP 1
Tap on the three horizontal lines.
Next
STEP 3
Tap on "Next"
+ Add Lock
STEP 2
Tap on "+ Add Lock"
+
STEP 4
Tap on the blue plus sign. Note: You may need to tap on lock keypad.
LOCK PAGE OVERVIEW
Unlock/Lock Unlock/Lock using phone's bluetooth
Generate Passcode Page Generate 6 different types of passcodes
eKey Page View and modify current eKeys
Remote Unlock Unlock remotely if Sifely Gateway is connected nearby
Records Page View entry times, attempts and methods
Settings Page View and modify settings
Send eKey Set up and send eKeys
Passcode Page View and modify passcode
Authorized Admin Page Create and edit admins
RF
Cards/Fobs Page Set up your fobs here
Wireless Key Fob Page Wireless Key Fob Page
Fingerprints Page Set up fingerprints
Unlock/Lock Status Check status of lock
Note: Some of these icons may not appear if the Gateway is not connected to the lock.
PASSCODES
Enter a name for this Passcoede
Best Practice: When inputting the passcode, use # + Code + #.
Passcode Page
Pay attention to this text when generating a code. You may experience issues if these instructions are not followed.
Note: To generate custom codes, you will need to be within bluetooth range of the lock unless a Gateway is connected.
Passcodes Search Katie 2021.10.27 09:00 One-time Bill 2021.10.27 09:00 Permanent
Within this page, you can ·Edit a passcode's number,
validity, and name. ·Delete code and view
records.
Note:The above can only be done within bluetooth range unless a Gateway is connected.
IC CARD / FOBS
RF
Cards
To add a fob to your lock. Follow these steps.
1. Tap on "Cards". 2. Tap on "Add Card" 3. Choose the validity period of the lock. 4. Once the lock says "Please swipe your card",
place the fob against 5 on the keypad. 5. If you hear"input successful ", the fob can be used
to unlock your lock.
AUTHORIZED ADMIN
Authorized Admin
Step1
Authorized Admins are similar to eKeys; however, an authorized admin can do the following:
1. Unlock/lock via the app. 2. Generate, Edit, Delete passcodes, IC cards, & fingerprints. 3. Adjust settings like passage mode, auto-lock timer, &
turn on/off the lock sound.
PASSAGE MODE & AUTO-LOCK
Settings
Step1
Auto-lock will automatically lock the lock when it has be opened after 5 second by default. This can be adjusted with Passage Mode and Auto-lock timer. Outlined below is how to adjust these settings related to auto-lock.
Timed Recipient
Send eKey Permanent One-time
Step2
Enter recipient's username. It will be the phone number or email address used during registration.
Enter Recipient's Account
Next
Wireless Keypad Door Sensor
Remote Unlock Auto Lock Passage Mode Lock Sound Privacy Lock
Step2
Select Passage Mode
On these Day
Sun Mon Tue Wed Thu
Step3
Passage Mode disables auto-lock during a set schedule.
INTEGRATIONS
Our locks work with the following software:
With more to come in the near future.
GATEWAY
The Gateway bridges any nearby locks to your local wifi allowing for remote control.
With the Gateway connected. Receive unlock notifications wherever you are. Remote unlock/lock. Check access logs whenever you need them. Generate, edit, or delete custom codes for your guests. Access the features of the webportal version of our app for free! Check battery level remotely.
FAQ
Q: I entered a code or fingerprint incorrectly too many times and my lock will not accept any new inputs.
A: Unlock the lock once via the app or wait 5 minutes.
Q: How can I manually lock the lock? A: Press and hold # to lock the lock.
Q: The batteries died before I could replace them. What can I do?
A: Use the provided physical keys to open or plug in a powerbank into the slot on the underside of the keypad to power it up to be able to enter and change the batteries.
Q: How do I share access of the lock on 2 different phones?
A: Refer to eKeys or Authorized Admin section on how to do that is.
Not working like it should? Contact us with the following information for quicker resolution.
Which product you do have? Where are you in the setup process?
Installing the product. Setting up the app and pairing the product. Already set up app with the product. How long have you had our products for?
Creo Normalizer JTP