User Manual for KLARUS models including: XT11GT Pro, Tactical Extreme Output Flashlight, XT11GT Pro Tactical Extreme Output Flashlight

Klarus XT11GT Pro V2.0 Instructions

Klarus, XT11GT, Pro, V2.0, Instructions

Klarus

版本:A0 Mode ALLUMÉ ÉTEINT High Medium Strobe SOS Low AN AUS ...

XT11GT Pro Tactical Extreme Output Flashlight User Manual Thank you for choosing Klarus products! Please read the user manual fully before use. XT11GT Pro V2.0说明书

Go Manual

Brightguy.com


File Info : application/pdf, 1 Pages, 3.53MB

PDF preview unavailable. Download the PDF instead.

Klarus XT11GT Pro V2 Flashlight Instructions
available at BrightGuy.com
XT11GT Pro
Tactical Extreme Output Flashlight User Manual Thank you for choosing Klarus products!
Please read the user manual fully before use.

(EN)English

Specifications
Model: XT11GT Pro Dimensions: 35mm(1.38") x 25.4mm(1") x 139.7mm(5.5") LED: Luminus SST-70-WCS-H50 R4 Output: 3300LM Working Voltage: 2.8V-6.4V Charge Current: 5V/1A Charge Time: 4h Compatible Batteries: 1 x 18650 or 2 x CR123A Waterproof: IPX8 Weight: 121.1g (4.27oz) (w/o battery) Warranty: 5 Years

Package Product Flashlight
Charging Cable Clip
Waterproof O Ring

QTY 1 1 1 1

Product Battery Holster Lanyard User Manual

QTY 1 1 1 1

ANSI

Mode Specification

Turbo High Medium Low Strobe SOS

ANSI lumens(LM) Runtime(h) Beam intensity(cd) Beam distance(m)

18GT-IMR31 Battery

3300 1200

200

10

3300

200

1.8

4

12

120

4

32

29440 10400 1940

64

=

=

410

240

100

20

=

=

ANSI lumens(LM) Runtime(h) Beam intensity(cd) Beam distance(m) Impact Resistance Waterproof

2*CR123A Battery

=

1200

400

60

1200

=

=

1

1.5

16

2

=

=

10400 4200

900

=

=

=

240

130

60

=

=

1.2m

IPX8

Note: The above data has been measured in accordance with international flashlight testing standards ANSI/NEMA FL1 using one KLARUS 18650 3100mAh battery under laboratory conditions. The data may vary slightly during actual use due to
battery type, individual usage habits and environmental factors.

How to use

User Setting Change
(Factory Default Setting: #1 Tactical Setting)
When the light is OFF, click and hold the MODE switch for 5 seconds, when the indicator flashing red/green, then click the Primary switch without releasing the MODE switch at the same time.

Primary switch MODE switch

User Setting Operations

User Setting #1: Tactical Setting

ON/OFF
Primary Switch: click to turn ON in TURBO mode, click again to turn OFF. MODE Switch: click to enter STROBE, click and hold for 2

seconds to keep STROBE.
Change Brightness Level MODE Switch: when ON, click to cycle through modes TURBO (3300LM)  HIGH (1200LM)  MEDIUM (200LM)  LOW (10LM)  Cycle. Click and hold for 2 seconds to enter STROBE.
User Setting #2: Outdoor Setting ON/OFF Primary Switch: click to turn ON in TURBO mode, click again to turn OFF. MODE Switch: click to enter LOW, click and hold for 1 second to keep LOW.
Change Brightness Level MODE Switch: when ON, click to cycle through modes TURBO (3300LM)  HIGH (1200LM)  MEDIUM (200LM)  LOW (10LM)  Cycle, click and hold for 3 seconds to enter SOS mode.
Lockout/Unlock
Unscrew the tailcap by half-turn to cut off the circuit, screw it back to unlock. (Recommend to lockout the flashlight when it is stored, carried or transported for a long period of time).
Intelligent Thermal Protection System (ITS)
When the flashlight is in Turbo mode, brightness will be automatically adjusted according to the temperature of the flashlight body to protect the LED and internal components and ensure safety and stability.
Battery Capacity Indicator
After power-on, the indicator will flash for 5 seconds. · Green, 70%-100% capacity remaining. · Orange, 30%-70% capacity remaining. · Red, less than 30% capacity remaining. · Red flashing, less than 10% capacity remaining.

Battery Installation

(1)
Twist off the tailcap

(2) Insert battery with positive terminal
towards lamp

(3)
Screw the tailcap tightly

Recharging
XT11GT Pro uses Type-C USB charging, and is compatible with any USB Type-C cable, wall charger or car charger. Charging Indicator: Red: Charging in progress Green: Charging complete Yellow Flashing: Battery problem (battery inserted not 18650 battery or battery orientation reversed or battery destroyed)
Note: please charge the battery when its capacity is low otherwise the flashlight is not able to change brightness level or brightness will become dark.



References

Adobe PDF library 15.00