Start Here – FDI – Future Designs Inc.
Instruction Manual for Future Designs Inc models including: UEZGUI-4357-70WVN 7.0 PCAP Touch Screen LCD GUI Development Kit, UEZGUI-4357-70WVN 7.0, PCAP Touch Screen LCD GUI Development Kit, Touch Screen LCD GUI Development Kit, Screen LCD GUI Development Kit, LCD GUI Development Kit, GUI Development Kit, Development Kit, Kit
7.0″ PCAP Touch Screen LCD GUI (Dev Kit) – UEZGUI-4357-70WVN – FDI – Future Designs Inc.
File Info : application/pdf, 2 Pages, 155.29KB
DocumentDocument7.0" PCAP Touch Screen LCD GUI Development Kit Congratulations on the purchase of your EZ® GUI development kit! Our goal is to ensure you have a pleasant experience familiarizing yourself with the functions and capabilities of our products. To Begin Development with your EZ GUI: 1. Power on the device by connecting the 5V power adapter to one end of the USB cable and the other end to the EZ GUI. Note: Do not connect the EZ GUI to a computer USB port. Standard 2.0/3.0 USB ports will not provide sufficient power to the device. 2. Visit TeamFDI.com/StartHere to download the UEZGUI-4357-70WVN Start Here Guide. This guide will provide step-by-step instructions and supporting files for designing your first graphical user interface. FDI Future Designs, Inc. UEZGUI-4357-70WVN Kit Contents · 7.0" PCAP Touch Screen LCD GUI Production Module (Part number: UEZGUI-4357-70WVN-BA) · Segger J-Link Lite Cortex-M ARM JTAG Debugger · 9 Pin Ribbon Cable · (2) Type A to Mini Type B USB Cables · USB A/C to 5V Power Adapter Also Included: · 4-bit microSD card Rev 1.20 - 1/4/2023 FDI Doc PN: MA00104