Chicco Home & Travel Bottle Warmer

Model: 06867 T

Reference: 00007389100000

The Chicco Home & Travel Bottle Warmer is designed for conveniently warming milk and meals at home or while traveling. It includes a special car adapter for use on the go and is compatible with most baby bottles and jars.

Product Names in Various Languages

• English: HOME-TRAVEL BOTTLE WARMER
• French: CHAUFFE-BIBERON MAISON-VOYAGE
• German: FLÄSCHCHENWÄRMER FÜR ZUHAUSE UND UNTERWEGS
• Spanish: CALIENTABIBERONES CASA-VIAJE
• Portuguese: AQUECEDOR DE BIBERÕES CASA-VIAGEM
• Czech: DOMÁCÍ/CESTOVNÍ OHŘÍVAČ LAHVÍ
• Polish: DOMOWY-PODRÓŻNY, PODGRZEWACZ DO BUTELEK
• Dutch: ZUIGFLESVERWARMER THUIS-OP REIS
• Greek: ΣΥΣΚΕΥΗ ΘΕΡΜΑΝΣΗΣ ΜΠΙΜΠΕΡΟ ΓΙΑ ΤΟ ΣΠΙΤΙ-ΤΑΞΙΔΙ
• Turkish: EVDE-YOLCULUKTA BİBERON ISITİCİSİ
• Hungarian: HÁZTARTÁSI ÉS AUTÓS CUMISÜVEG MELEGÍTŐ
• Croatian: GREJAČ FLAŠICA ZA UPOTREBU KOD KUĆE ILI NA PUTOVANJU
• Slovak: OHRIEVAČ FLIAŠ NA DOMA I NA CESTY
• Bulgarian: ДОМАКИНСКИ ПРЕНОСИМ УРЕД ЗА ЗАТОПЛЯНЕ НА ШИШЕТА
• Ukrainian: ДОМАШНІЙ/ДОРОЖНІЙ НАГРІВАЧ ПЛЯШЕЧОК З ДИТЯЧИМ ХАРЧУВАННЯМ
• Russian: ДОМАШНИЙ-ДОРОЖНЫЙ НАГРЕВАТЕЛЬ ДЛЯ БУТЫЛОЧЕК И ДЕТСКОГО ПИТАНИЯ
• Romanian: ÎNCĂLZITOR DE BIBERON CASĂ-CĂLĂTORIE
• Arabic: مسخن الزجاجات في المنزل والرحلات

Product Components

The bottle warmer includes the following parts:

• a: Main body of the bottle warmer.
• b: Basket or holder for bottles and jars.
• c: Power cord for home use.
• d: Power adapter for car use.
• e: Home power connector.
• f: Car power connector.
• g: Power on/off touch button [Power Button].
• h: Heating mode selection touch button [Mode Select].
• i: Indicator lights (i1, i2, i3) showing the selected heating mode.
• l: Mechanical switch for the car power connector [Car Switch].

Important Safety Warnings

General Safety:

• This appliance can be used by children aged 3 years and above if supervised or if they have received instructions on safe use and understand the associated risks.
• Children aged 8 years and above, if supervised, may clean or perform maintenance on the appliance.
• Keep the appliance and its cord out of reach of children under 3 years old.
• Children must not play with the appliance.
• The appliance is intended for indoor use only and should not be exposed to sun, rain, or other atmospheric conditions.
• Ensure the appliance is placed on a flat, stable surface, out of reach of children, away from cribs and beds. The appliance and water inside can become very hot during operation.
• Never operate the bottle warmer without water in the heating container.
• Exercise caution with hot water and surfaces during and after operation to prevent burns [Burn Hazard].
• Always check the temperature of the food before feeding the child (should not exceed 37°C).
• Never move the bottle warmer while it is in use or contains hot liquids.
• To disconnect from the power supply, turn off the appliance and unplug it by pulling the plug, not the cord.
• Ensure the appliance is unplugged and has cooled down before cleaning, moving, or performing maintenance.
• Do not immerse the appliance, plug, or cord in water or other liquids.
• Do not attempt to open or repair the appliance yourself.
• Do not use the appliance if it or its accessories are damaged.
• Ensure the electrical installation of the room is compliant with safety regulations.
• Do not place the appliance on hot surfaces, near gas stoves, or on heat/moisture-sensitive surfaces.
• Use only plastic bottles resistant to high temperatures or heat-resistant glass bottles. Do not use disposable bottles.
• Be cautious of hot steam generated during water heating.
• The appliance is for warming pre-prepared food, not for cooking. Recommended food temperature is around 37°C. Do not reheat food more than once or for longer than an hour.
• The appliance automatically switches off after one hour of continuous operation. Allow it to cool completely before reuse.
• The appliance automatically switches off if no settings are entered for three minutes.
• Do not touch the appliance with wet hands.
• If the appliance falls into water, unplug it immediately and do not use it. Contact qualified personnel.
• In case of malfunction, unplug the appliance and contact qualified personnel.
• Repairs should only be carried out by qualified technicians or Artsana S.p.A.
• Dispose of packaging and used appliances according to local waste separation regulations.
• Do not use the 'keep warm' function for quantities below 150 ml.
• Do not freeze modified milk.
• Do not freeze milk in bottles with removable bases (e.g., Chicco Perfect5).
• When using milk bags, select the gradual heating mode.
• When warming homogenized products, stir frequently to ensure even temperature.
• Do not reheat milk or meals more than once per feeding/meal. Discard if previously heated.
• Avoid shaking bottles with breast milk to prevent air bubbles.
• Overheating can reduce the nutritional value and vitamins in breast milk.
• Never use the car adapter with 24V sockets (e.g., in trucks) as it can cause irreversible damage.

Home Usage

Preparation:

Before starting, ensure bottles are sanitized/disinfected. Never operate without water in the heating container. Use a bottle with markings or a suitable container to add the correct amount of water. Do not fill under a running tap.

Steps:

1. Place the bottle warmer on a flat, stable surface.
2. Add water to the central body (a) as indicated in the tables below.
3. Gently place the basket (b) with the bottle or jar into the central body (a):
   • For Bottles: With the cap and teat correctly fitted, without the basket.
   • For Jars: Without the lid and any labels.
4. Plug the power cord (c) into the appliance connector (e) and then into a wall socket. A long beep will sound.
5. Turn on the appliance by touching the power button (g) [Power Button]. A beep will sound, and indicator lights (i) will flash and light up sequentially.
6. Select the heating mode by repeatedly touching the mode selection button (h) [Mode Select]:
   • Quick Heating (i1 flashes): For powdered milk.
   • Gentle Heating (i2 flashes): For breast milk.
   • Meal Heating (i3 flashes): For homogenized food jars.
7. Start the selected heating cycle by touching the power button (g) [Power Button] again. A beep will sound, and the indicator light for the selected mode will stay lit, indicating the cycle is in progress. If no cycle is started within 3 minutes, the appliance will turn off automatically.
8. After a few minutes, the indicator light for the selected mode will flash, and a long beep will sound, indicating the end of the heating cycle. Note: Heating times and final temperatures can vary based on container type, food quantity, initial temperature, heating mode, and food consistency.
9. To turn off the appliance, touch the power button (g) [Power Button] again until the indicator lights (i) turn off. Unplug the power cord (c).
10. After removing the bottle or jar, dry it thoroughly with a cloth to remove any residual water before feeding.

Water Quantities for Home Usage

*60ml of food in a 150ml bottle.

Note: The water quantities listed are for Chicco bottles and 80ml jars. For other brands or capacities, use the same water amounts but carefully check food temperature after heating (max 37°C).

Car Usage

Warning: Do not operate the bottle warmer while driving as hot water can cause burns.

Preparation: Ensure the car socket is compatible. Switch the mechanical switch (l) [Car Switch] to the car power connector (f). Ensure the car power adapter (d) is unplugged from the car socket, and the cord (d) is connected to the car connector (f).

Follow steps 1, 2, and 3 from "Home Usage", with the following adjustments:

1. Connect the car power adapter (d) to the car's cigarette lighter socket. A beep will sound, and the indicator light on the plug will turn red.
2. The heating time may differ from home usage due to the different voltage.
3. To turn off, touch the power button (g) [Power Button] until indicator lights (i) turn off. Unplug the car power adapter (d).
4. After removing the bottle or jar, dry it thoroughly.

Water Quantities for Car Usage

*60ml of food in a 150ml bottle.

Note: The water quantities listed are for Chicco bottles and 80ml jars. For other brands or capacities, use the same water amounts but carefully check food temperature after heating (max 37°C).

Temperature Maintenance

After a heating cycle finishes, the appliance can maintain the food's temperature for up to 60 minutes. The indicator light for the selected mode will flash during this time. The appliance will automatically turn off after 60 minutes.

Note: During temperature maintenance, the food temperature may rise above 37°C. Always check the temperature before feeding. If the food is not warm enough, you can place the bottle/jar back in the warmer with the 'temperature maintenance' mode active. Check regularly until the desired temperature is reached. Exercise caution to avoid burns.

Specifics:

• Powdered Milk: Shake the bottle to equalize temperature and test on your wrist.
• Homogenized Food Jars: Stir the contents to equalize temperature and test.
• Breast Milk: Avoid shaking to prevent air bubbles. Overheating can reduce nutrients and vitamins.

Cleaning and Maintenance

Unplug the appliance and allow it to cool completely. Empty any residual water from the heating container and dry thoroughly.

Descaling:

To remove scale deposits, fill the container with a mixture of 200 ml water and 200 ml white vinegar. Let it sit overnight. Never turn on the appliance with the vinegar solution inside. After descaling, rinse thoroughly with water, clean, and dry all parts. Perform a heating cycle with 140 ml of water (empty). Allow to cool, empty residual water, and dry.

Exterior Cleaning: Use a slightly damp cloth. Descale at least weekly, or more often with hard water. Do not use abrasive tools, detergents, alcohol, or solvents.

Symbols:

• [Double Insulation Symbol] Double Insulation
• CE Appliance complies with essential requirements of applicable EU Directives.
• [Warning Symbol] Warning [!].
• [Information Symbol] Read User Manual [i].
• [Indoor Use Symbol] For indoor use only.
• [IMQ Symbol] Appliance certified by IMQ (Italian Quality Mark Institute).

Technical Specifications

• Reference: 00007389100000
• Model: 06867 T
• Input Voltage: 220-240V~, 50-60Hz (Home)
• Power Consumption: 220W (Home)
• Car Input Voltage: 12V
• Car Power Consumption: 60W
• Origin: Made in China

Compliance and Disposal

This appliance complies with Directive 2014/30/EU (Electromagnetic Compatibility), 2014/35/EU (Low Voltage Directive), and 2011/65/UE (RoHS).

The crossed-out wheeled bin symbol [Trash Can Symbol] indicates that the product must not be disposed of with household waste. Return it to an electrical and electronic equipment collection point or to the retailer. Proper waste segregation helps prevent negative effects on the environment and health.

Artsana S.p.A. reserves the right to modify the contents of this manual at any time without prior notice.

Copying or translating this manual without written permission from Artsana S.p.A. is prohibited.