VERTU VTL-202205 TWS Bluetooth Headset
Model: VTL-202205
Brand: VERTU
Product Information
Description and Accessories
The product includes:
- Earphones: Two wireless earbuds designed for True Wireless Stereo (TWS) audio.
- Cable: A charging or data cable.
- Battery Box: A charging case for the earphones, also branded VERTU ENGLAND.
Remark: The images shown are indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern.
Charging Instructions
Earphone Charging
When an earphone is placed into the battery box, a ? light will flash. The ? light turns off when the earphone is fully charged.
Battery Box Charging
During charging, the battery power indicator will illuminate and display the current power level. Once fully charged, the power indicator will turn off approximately 30 seconds after charging is complete. The indicator displays the power value during other operations.
Battery Capacity
| Component | Capacity |
|---|---|
| Earphone | 50 mAh |
| Battery box | 480 mAh |
Warning: Do not throw batteries into fire to avoid explosion. The rechargeable battery of this product must be properly disposed of for recycling.
Earphone Pairing
The earphones will automatically power on when removed from the battery box and power off when placed back into the battery box.
The Left (L) and Right (R) earphones will pair automatically when both are taken out of the box simultaneously. A [voice-prompt] indicating 'pairing' signifies successful pairing.
Bluetooth Pairing with a Phone
Steps:
- Enable the Bluetooth function on your phone.
- If your mobile phone is a METAVERTU phone, a pairing window should automatically appear when the earphones are taken from the box.
- If your mobile phone is not a METAVERTU phone, search for and select 'iVERTU-TWS' from the Bluetooth equipment list on your phone to connect.
Key Operation
Basic Operations
- Answer Call: Shortly press the L or R earphone once for any incoming call.
- Reject Call: Long press the L or R earphone for 1-2 seconds to reject an incoming call.
- Hang Up Call: Shortly single press the L or R headset during a call.
- Previous/Next Song: In music playing mode, shortly triple press the L earphone to play the previous song, and double press the R earphone to play the next song.
- Volume Adjusting: On the L headset, shortly double press to increase volume and triple press to decrease volume.
Key Operation - Detail Description
| Function | Operation | Headset Indicator | Prompt Tone |
|---|---|---|---|
| L&R Earphone Pairing | L&R earphones taken out from box | R: Red/white lamp blinking alternately; L: [light-off] | Pairing [voice-prompt] |
| Connection with Phone | Select 'iVERTU-TWS' from BT equipment list and connect with phone. (Pop-up window will display automatically if the phone is METAVERTU phone) | [light-off] | Connected [voice-prompt] |
| Reset | Long press 10s in earphone power off status | None | None |
| Earphone Charging | Headset taken into battery box | Red lamp of earphone goes on in charging process. Red light goes off when fully charged. | None |
| Power Off | Long press 6s when headset taken out from battery box. | R/L: Red lamp goes on 1s | Power off [voice-prompt] |
Specifications
| Attribute | Details |
|---|---|
| Name | TWS bluetooth headset |
| Model | VTL-202205 |
| Impedance | 16 Ω |
| Frequency | 20-20 KHz |
| Transmission distance | ≥ 10M |
| Charging voltage | DC5V – 1A |
| Product type | Dynamic earphone φ10mm |
| Earphone battery capacity | 50 mAh |
| Battery box capacity | 480 mAh |
| Dimension | 60.8*60.9*25.2mm |
Q&A / Troubleshooting
No Sound
- Check if the earphone is in working status.
- Verify if the sound volume is set appropriately.
- Confirm the connection status between the earphone and the mobile phone.
- Ensure the earphone is within the normal Bluetooth connection distance.
No Good Performance
- Check if the mobile phone is in an area with a strong signal.
- Ensure there are no physical barriers between the earphone and the mobile phone, and that they are within normal Bluetooth connection distance.
Compliance Information
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Industry Canada Compliance
English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio électrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
